From mboxrd@z Thu Jan 1 00:00:00 1970 From: grant.likely@secretlab.ca (Grant Likely) Date: Sat, 02 Mar 2013 20:10:04 +0000 Subject: [PATCH 3/3] ARM: S3C24XX: handle s3c2412 eints using new infrastructure In-Reply-To: References: <201302120102.03511.heiko@sntech.de> <201302120105.45608.heiko@sntech.de> Message-ID: <20130302201004.95D033E20E9@localhost> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, 15 Feb 2013 15:48:52 +0100, Linus Walleij wrote: > On Tue, Feb 12, 2013 at 1:05 AM, Heiko St??bner wrote: > > > The s3c2412 handles the eints 0 to 3 different than all the other SoCs > > of the 24xx range. These eints must be acked and masked in the regular > > bits as well as the bits 0 to 3 of the eint registers, which are unused > > on the other SoCs. > > > > This of course can be realized using the new infrastructure with the > > eint bits in the main register being the parent interrupts of the > > same bits in the eint register. > > > > The s3c2412 therefore gets its own IRQ_EINT0 to 4 constants that > > reside in the newly created gap before IRQ_EINT4. gpio-samsung, as the > > only user of these is modified to return the correct values when > > handling gpio_to_irq requests on s3c2412 based machines. > > > > Due to lack of hardware this is compile tested only, but should > > hopefully work as intended. > > > > Signed-off-by: Heiko Stuebner > > We definately need an ACK from some Samsung maintainer for > this patch... Pish, I'm not taking this. It's all arch/arm code with a 6 line drivers/gpio change. Instead: Acked-by: Grant Likely g.