From mboxrd@z Thu Jan 1 00:00:00 1970 From: mporter@ti.com (Matt Porter) Date: Wed, 6 Mar 2013 09:01:30 -0500 Subject: [PATCH v8 6/9] ARM: dts: add AM33XX EDMA support In-Reply-To: References: <1362516795-6346-1-git-send-email-mporter@ti.com> <1362516795-6346-7-git-send-email-mporter@ti.com> Message-ID: <20130306140130.GL6209@beef> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Mar 06, 2013 at 04:19:58AM +0000, Kumar, Anil wrote: > Hi, > > On Wed, Mar 06, 2013 at 02:23:12, Porter, Matt wrote: > > Adds AM33XX EDMA support to the am33xx.dtsi as documented in > > Documentation/devicetree/bindings/dma/ti-edma.txt > > > > Signed-off-by: Matt Porter > > --- > > arch/arm/boot/dts/am33xx.dtsi | 20 ++++++++++++++++++++ > > 1 file changed, 20 insertions(+) > > > > diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi > > index 0957645..aaf44122 100644 > > --- a/arch/arm/boot/dts/am33xx.dtsi > > +++ b/arch/arm/boot/dts/am33xx.dtsi > > @@ -87,6 +87,26 @@ > > reg = <0x48200000 0x1000>; > > }; > > > > + edma: edma at 49000000 { > > + compatible = "ti,edma3"; > > + ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; > > + reg = <0x49000000 0x10000>, > > + <0x44e10f90 0x10>; > > + interrupt-parent = <&intc>; > > Is it really need of "interrupt-parent = <&intc>" here ? > as this property is already with root node. > I am taking reference of 3.9-rc1 You're correct. It's inherited from the parent node so I'll drop it out. I also noted that the cpsw node has this wrong so I'll send a patch to address that separately. -Matt