From mboxrd@z Thu Jan 1 00:00:00 1970 From: magnus.damm@gmail.com (Magnus Damm) Date: Mon, 18 Mar 2013 23:32:22 +0900 Subject: [PATCH 02/04] ARM: shmobile: r8a73a4 SCIF support V2 In-Reply-To: <20130318143203.26687.98180.sendpatchset@w520> References: <20130318143203.26687.98180.sendpatchset@w520> Message-ID: <20130318143222.26687.79780.sendpatchset@w520> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Magnus Damm Add SCIF serial port support to the r8a73a4 SoC by adding platform devices for SCIFA0 -> SCIFA1 as well as SCIFB0 -> SCIFB3 together with clock bindings. DT device description is excluded at this point since such bindings are still under development. Signed-off-by: Magnus Damm --- Changes since V1: - Replaced static platform devices with array of platform data together with a call to platform_device_register_data() This version is about 70 lines smaller than V1. arch/arm/mach-shmobile/clock-r8a73a4.c | 15 ++++++++++- arch/arm/mach-shmobile/setup-r8a73a4.c | 43 ++++++++++++++++++++++++++++++++ 2 files changed, 57 insertions(+), 1 deletion(-) --- 0003/arch/arm/mach-shmobile/clock-r8a73a4.c +++ work/arch/arm/mach-shmobile/clock-r8a73a4.c 2013-03-18 21:42:19.000000000 +0900 @@ -28,6 +28,7 @@ #define CPG_LEN 0x270 #define MPCKCR 0xe6150080 +#define SMSTPCR2 0xe6150138 static struct clk_mapping cpg_mapping = { .phys = CPG_BASE, @@ -53,11 +54,23 @@ static struct clk *main_clks[] = { &extal2_clk, }; -enum { MSTP_NR }; +enum { MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP_NR }; static struct clk mstp_clks[MSTP_NR] = { + [MSTP204] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 4, 0), /* SCIFA0 */ + [MSTP203] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 3, 0), /* SCIFA1 */ + [MSTP206] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 6, 0), /* SCIFB0 */ + [MSTP207] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 7, 0), /* SCIFB1 */ + [MSTP216] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 16, 0), /* SCIFB2 */ + [MSTP217] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 17, 0), /* SCIFB3 */ }; static struct clk_lookup lookups[] = { + CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), + CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), + CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]), + CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]), + CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]), + CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]), }; void __init r8a73a4_clock_init(void) --- 0003/arch/arm/mach-shmobile/setup-r8a73a4.c +++ work/arch/arm/mach-shmobile/setup-r8a73a4.c 2013-03-18 21:43:19.000000000 +0900 @@ -21,13 +21,56 @@ #include #include #include +#include #include #include #include #include +#define SCIF_COMMON(scif_type, baseaddr, irq) \ + .type = PORT_SCIFA, \ + .mapbase = baseaddr, \ + .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \ + .scbrr_algo_id = SCBRR_ALGO_4, \ + .irqs = SCIx_IRQ_MUXED(irq) + +#define SCIFA_DATA(index, baseaddr, irq) \ +[index] = { \ + SCIF_COMMON(PORT_SCIFA, baseaddr, irq), \ + .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE0, \ +} + +#define SCIFB_DATA(index, baseaddr, irq) \ +[index] = { \ + SCIF_COMMON(PORT_SCIFB, baseaddr, irq), \ + .scscr = SCSCR_RE | SCSCR_TE, \ +} + +enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFB3 }; + +static const struct plat_sci_port scif[] = { + SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */ + SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */ + SCIFB_DATA(SCIFB0, 0xe6c50000, gic_spi(145)), /* SCIFB0 */ + SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */ + SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */ + SCIFB_DATA(SCIFB3, 0xe6cf0000, gic_spi(151)), /* SCIFB3 */ +}; + +static inline void r8a73a4_register_scif(int idx) +{ + platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx], + sizeof(struct plat_sci_port)); +} + void __init r8a73a4_add_standard_devices(void) { + r8a73a4_register_scif(SCIFA0); + r8a73a4_register_scif(SCIFA1); + r8a73a4_register_scif(SCIFB0); + r8a73a4_register_scif(SCIFB1); + r8a73a4_register_scif(SCIFB2); + r8a73a4_register_scif(SCIFB3); } #ifdef CONFIG_USE_OF