[PATCHv2 2/2] ARM: socfpga: Add clock entries into device tree

[mturquette@linaro.org (Mike Turquette)]

Quoting dinguyen at altera.com (2013-03-19 08:45:36)
> From: Dinh Nguyen <dinguyen@altera.com>
> 
> Adds the main PLL clock groups for SOCFPGA into device tree file
> so that the clock framework to query the clock and clock rates
> appropriately.
> 
> $cat /sys/kernel/debug/clk/clk_summary
>    clock                        enable_cnt  prepare_cnt  rate
> ---------------------------------------------------------------------
>  osc1                           2           2            25000000
>     sdram_pll                   0           0            400000000
>        s2f_usr2_clk             0           0            66666666
>        ddr_dq_clk               0           0            200000000
>        ddr_2x_dqs_clk           0           0            400000000
>        ddr_dqs_clk              0           0            200000000
>     periph_pll                  2           2            500000000
>        s2f_usr1_clk             0           0            50000000
>        per_base_clk             4           4            100000000
>        per_nand_mmc_clk         0           0            25000000
>        per_qsi_clk              0           0            250000000
>        emac1_clk                1           1            125000000
>        emac0_clk                0           0            125000000
>     main_pll                    1           1            1600000000
>        cfg_s2f_usr0_clk         0           0            100000000
>        main_nand_sdmmc_clk      0           0            100000000
>        main_qspi_clk            0           0            400000000
>        dbg_base_clk             0           0            400000000
>        mainclk                  0           0            400000000
>        mpuclk                   1           1            800000000
>           smp_twd               1           1            200000000
> 
> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>

There is a lot going on in this one patch.  I would prefer to see the
clock driver broken out separately.

<snip>

> diff --git a/drivers/clk/socfpga/clk.c b/drivers/clk/socfpga/clk.c
> index 2c855a6..da6b461 100644
> --- a/drivers/clk/socfpga/clk.c
> +++ b/drivers/clk/socfpga/clk.c
<snip>
> +static int clk_pll_enable(struct clk_hw *hwclk)
> +{
> +       struct socfpga_clk *socfpgaclk = to_socfpga_clk(hwclk);
> +       u32 reg;
> +
> +       reg = readl(socfpgaclk->reg);
> +       reg |= SOCFPGA_PLL_EXT_ENA;
> +       writel(reg, socfpgaclk->reg);
> +
> +       return 0;
> +}
> +
> +static void clk_pll_disable(struct clk_hw *hwclk)
>  {
> +       struct socfpga_clk *socfpgaclk = to_socfpga_clk(hwclk);
> +       u32 reg;
> +
> +       reg = readl(socfpgaclk->reg);
> +       reg &= ~SOCFPGA_PLL_EXT_ENA;
> +       writel(reg, socfpgaclk->reg);
> +}
> +

For a simple enable which just sets a bit, you might want to re-use the
basic gate clock type.  This can be done similar to the composite clock
patches (currently on the list) by stuffing a clk_gate structure into
your custom socfpga_clk type.

Regards,
Mike