[PATCHv2 2/2] ARM: socfpga: Add clock entries into device tree

[mturquette@linaro.org (Mike Turquette)]

Quoting Dinh Nguyen (2013-03-19 11:45:50)
> Hi Mike,
> 
> On Tue, 2013-03-19 at 09:46 -0700, Mike Turquette wrote:
> > Quoting dinguyen at altera.com (2013-03-19 08:45:36)
> > > From: Dinh Nguyen <dinguyen@altera.com>
> > > 
> > > Adds the main PLL clock groups for SOCFPGA into device tree file
> > > so that the clock framework to query the clock and clock rates
> > > appropriately.
> > > 
> > > $cat /sys/kernel/debug/clk/clk_summary
> > >    clock                        enable_cnt  prepare_cnt  rate
> > > ---------------------------------------------------------------------
> > >  osc1                           2           2            25000000
> > >     sdram_pll                   0           0            400000000
> > >        s2f_usr2_clk             0           0            66666666
> > >        ddr_dq_clk               0           0            200000000
> > >        ddr_2x_dqs_clk           0           0            400000000
> > >        ddr_dqs_clk              0           0            200000000
> > >     periph_pll                  2           2            500000000
> > >        s2f_usr1_clk             0           0            50000000
> > >        per_base_clk             4           4            100000000
> > >        per_nand_mmc_clk         0           0            25000000
> > >        per_qsi_clk              0           0            250000000
> > >        emac1_clk                1           1            125000000
> > >        emac0_clk                0           0            125000000
> > >     main_pll                    1           1            1600000000
> > >        cfg_s2f_usr0_clk         0           0            100000000
> > >        main_nand_sdmmc_clk      0           0            100000000
> > >        main_qspi_clk            0           0            400000000
> > >        dbg_base_clk             0           0            400000000
> > >        mainclk                  0           0            400000000
> > >        mpuclk                   1           1            800000000
> > >           smp_twd               1           1            200000000
> > > 
> > > Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
> > 
> > There is a lot going on in this one patch.  I would prefer to see the
> > clock driver broken out separately.
> 
> Not sure what you mean by breaking out the clock driver separately. The
> patch is only touching the clocks for mach-socfpga.
> 

I mean breaking the change to drivers/clk/socfpga/clk.c out into a
separate patch.

> The patch is
> 7 files changed, 366 insertions(+), 21 deletions(-)
> 
> while the patch to enable clk-highbank was:
> 8 files changed, 463 insertions(+), 64 deletions(-)
> 

That is a fair comparison.  However I still prefer to see data (e.g. dts
changes) separated from logic (clk.c changes).  I think it makes for a
cleaner git history and makes patches more readable too.

Regards,
Mike

> > <snip>
> > 
> > > diff --git a/drivers/clk/socfpga/clk.c b/drivers/clk/socfpga/clk.c
> > > index 2c855a6..da6b461 100644
> > > --- a/drivers/clk/socfpga/clk.c
> > > +++ b/drivers/clk/socfpga/clk.c
> > <snip>
> > > +static int clk_pll_enable(struct clk_hw *hwclk)
> > > +{
> > > +       struct socfpga_clk *socfpgaclk = to_socfpga_clk(hwclk);
> > > +       u32 reg;
> > > +
> > > +       reg = readl(socfpgaclk->reg);
> > > +       reg |= SOCFPGA_PLL_EXT_ENA;
> > > +       writel(reg, socfpgaclk->reg);
> > > +
> > > +       return 0;
> > > +}
> > > +
> > > +static void clk_pll_disable(struct clk_hw *hwclk)
> > >  {
> > > +       struct socfpga_clk *socfpgaclk = to_socfpga_clk(hwclk);
> > > +       u32 reg;
> > > +
> > > +       reg = readl(socfpgaclk->reg);
> > > +       reg &= ~SOCFPGA_PLL_EXT_ENA;
> > > +       writel(reg, socfpgaclk->reg);
> > > +}
> > > +
> > 
> > For a simple enable which just sets a bit, you might want to re-use the
> > basic gate clock type.  This can be done similar to the composite clock
> > patches (currently on the list) by stuffing a clk_gate structure into
> > your custom socfpga_clk type.
> 
> I'll take a look at the list about this.
> 
> Thanks for the review.
> 
> Dinh
> > 
> > Regards,
> > Mike
> >