From: magnus.damm@gmail.com (Magnus Damm)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 01/04] ARM: shmobile: Initial r8a7790 SoC support
Date: Wed, 20 Mar 2013 23:36:14 +0900 [thread overview]
Message-ID: <20130320143614.32377.61774.sendpatchset@w520> (raw)
In-Reply-To: <20130320143604.32377.32634.sendpatchset@w520>
From: Magnus Damm <damm@opensource.se>
Add initial support for the r8a7790 SoC including:
- Single Cortex-A15 CPU Core
- GIC
- Architecture timer
No static virtual mappings are used, all the components
make use of ioremap(). DT_MACHINE_START is still wrapped
in CONFIG_USE_OF to match other mach-shmobile code.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/arm/boot/dts/r8a7790.dtsi | 54 ++++++++++++++++++++++
arch/arm/mach-shmobile/Kconfig | 7 ++
arch/arm/mach-shmobile/Makefile | 1
arch/arm/mach-shmobile/clock-r8a7790.c | 61 +++++++++++++++++++++++++
arch/arm/mach-shmobile/include/mach/r8a7790.h | 7 ++
arch/arm/mach-shmobile/setup-r8a7790.c | 51 ++++++++++++++++++++
6 files changed, 181 insertions(+)
--- /dev/null
+++ work/arch/arm/boot/dts/r8a7790.dtsi 2013-03-20 23:05:42.000000000 +0900
@@ -0,0 +1,54 @@
+/*
+ * Device Tree Source for the r8a7790 SoC
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "renesas,r8a7790";
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+ clock-frequency = <1300000000>;
+ };
+ };
+
+ gic: interrupt-controller at f1001000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0xf1001000 0x1000>,
+ <0xf1002000 0x1000>,
+ <0xf1004000 0x2000>,
+ <0xf1006000 0x2000>;
+ interrupts = <1 9 0xf04>;
+
+ gic-cpuif at 4 {
+ compatible = "arm,gic-cpuif";
+ cpuif-id = <4>;
+ cpu = <&cpu0>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ };
+};
--- 0011/arch/arm/mach-shmobile/Kconfig
+++ work/arch/arm/mach-shmobile/Kconfig 2013-03-20 23:05:41.000000000 +0900
@@ -43,6 +43,13 @@ config ARCH_R8A7779
select USB_ARCH_HAS_OHCI
select RENESAS_INTC_IRQPIN
+config ARCH_R8A7790
+ bool "R-Car H2 (R8A77900)"
+ select ARM_GIC
+ select CPU_V7
+ select ARM_ARCH_TIMER
+ select SH_CLK_CPG
+
config ARCH_EMEV2
bool "Emma Mobile EV2"
select ARCH_WANT_OPTIONAL_GPIOLIB
--- 0009/arch/arm/mach-shmobile/Makefile
+++ work/arch/arm/mach-shmobile/Makefile 2013-03-20 23:05:41.000000000 +0900
@@ -11,6 +11,7 @@ obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a
obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o clock-r8a73a4.o
obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o
obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o
+obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o clock-r8a7790.o
obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o clock-emev2.o
# SMP objects
--- /dev/null
+++ work/arch/arm/mach-shmobile/clock-r8a7790.c 2013-03-20 23:05:42.000000000 +0900
@@ -0,0 +1,61 @@
+/*
+ * r8a7790 clock framework support
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/sh_clk.h>
+#include <linux/clkdev.h>
+#include <mach/common.h>
+
+#define CPG_BASE 0xe6150000
+#define CPG_LEN 0x1000
+
+static struct clk_mapping cpg_mapping = {
+ .phys = CPG_BASE,
+ .len = CPG_LEN,
+};
+
+static struct clk *main_clks[] = {
+};
+
+enum { MSTP_NR };
+static struct clk mstp_clks[MSTP_NR] = {
+};
+
+static struct clk_lookup lookups[] = {
+};
+
+void __init r8a7790_clock_init(void)
+{
+ int k, ret = 0;
+
+ for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+ ret = clk_register(main_clks[k]);
+
+ if (!ret)
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+ if (!ret)
+ shmobile_clk_init();
+ else
+ panic("failed to setup r8a7790 clocks\n");
+}
--- /dev/null
+++ work/arch/arm/mach-shmobile/include/mach/r8a7790.h 2013-03-20 23:14:00.000000000 +0900
@@ -0,0 +1,7 @@
+#ifndef __ASM_R8A7790_H__
+#define __ASM_R8A7790_H__
+
+void r8a7790_add_standard_devices(void);
+void r8a7790_clock_init(void);
+
+#endif /* __ASM_R8A7790_H__ */
--- /dev/null
+++ work/arch/arm/mach-shmobile/setup-r8a7790.c 2013-03-20 23:05:42.000000000 +0900
@@ -0,0 +1,51 @@
+/*
+ * r8a7790 processor support
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/r8a7790.h>
+#include <asm/mach/arch.h>
+
+void __init r8a7790_add_standard_devices(void)
+{
+}
+
+#ifdef CONFIG_USE_OF
+void __init r8a7790_add_standard_devices_dt(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *r8a7790_boards_compat_dt[] __initdata = {
+ "renesas,r8a7790",
+ NULL,
+};
+
+DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
+ .init_irq = irqchip_init,
+ .init_machine = r8a7790_add_standard_devices_dt,
+ .init_time = shmobile_timer_init,
+ .dt_compat = r8a7790_boards_compat_dt,
+MACHINE_END
+#endif /* CONFIG_USE_OF */
next prev parent reply other threads:[~2013-03-20 14:36 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-20 14:36 [PATCH 00/04] ARM: shmobile: r8a7790 SoC and Lager board support Magnus Damm
2013-03-20 14:36 ` Magnus Damm [this message]
2013-03-20 14:36 ` [PATCH 02/04] ARM: shmobile: r8a7790 SCIF support Magnus Damm
2013-03-20 14:36 ` [PATCH 03/04] ARM: shmobile: r8a7790 IRQC support Magnus Damm
2013-03-20 14:36 ` [PATCH 04/04] ARM: shmobile: Lager support Magnus Damm
2013-03-21 11:38 ` [PATCH 00/04] ARM: shmobile: r8a7790 SoC and Lager board support Sergei Shtylyov
2013-03-25 7:44 ` Simon Horman
-- strict thread matches above, loose matches on Subject: below --
2013-03-27 15:49 [PATCH 00/04 v2] ARM: shmobile: r8a7790 SoC Magnus Damm
2013-03-27 15:49 ` [PATCH 01/04] ARM: shmobile: Initial r8a7790 SoC support Magnus Damm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130320143614.32377.61774.sendpatchset@w520 \
--to=magnus.damm@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).