From mboxrd@z Thu Jan  1 00:00:00 1970
From: ezequiel.garcia@free-electrons.com (Ezequiel Garcia)
Date: Fri, 22 Mar 2013 11:23:31 -0300
Subject: [PATCH 00/16] Marvell EBU thermal sensor consolidation
In-Reply-To: <20130321173251.GA3070@obsidianresearch.com>
References: <1363818997-23137-1-git-send-email-ezequiel.garcia@free-electrons.com>
 <20130321064501.GK21478@lunn.ch>
 <20130321173251.GA3070@obsidianresearch.com>
Message-ID: <20130322142330.GA31661@localhost>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Thu, Mar 21, 2013 at 11:32:51AM -0600, Jason Gunthorpe wrote:
> On Thu, Mar 21, 2013 at 07:45:01AM +0100, Andrew Lunn wrote:
> 
> > In the end, i decided it was simpler and cleaner to just have separate
> > drivers. This is something which we should think about and discuss.
> 
> When I looked through the merge'd driver I thought the shared code
> really had little to do with Marvell, it was mostly boilerplate that
> would be common to any memory mapped temperature sensor - so maybe the
> drivers should be kept apart and the boiler plate could be factored?
> 
>  thermal_platform_mmio_init(pdev,&ops);
> 
> Where ops has the is_valid, init_sensor, get_sensor functions
> 
> Or something?
> 

Mmm... I'm not entirely sure. It might make sense if we could have
thermal drivers for mor SoC than just Marvell's.

Is it judicious to have a thermal-mmio based on Marvell-only devices?

> ...
> 
> BTW, Ezequiel your driver is probably a bit smaller if you do
> 
> struct mvebu_ops {
> 	/* Initialize the sensor (optional) */
> 	void (*init_sensor)(struct mvebu_thermal_priv *);
> 
> 	/* Test for a valid sensor value (optional) */
> 	bool (*is_valid)(struct mvebu_thermal_priv *);
> };
> 
> static const struct mvebu_ops kirkwood_ops = {..};
> 
> static const struct of_device_id mvebu_thermal_id_table[] = {
> 	{
> 		.compatible = "marvell,kirkwood-thermal",
> 		.data       = &kirkwood_ops,
> 	},
> 
> And drop the switch statement and the MVEBU_THERMAL_SOC_* constants..
> 

Yes, this sounds like a very good idea. I'll try it and see what happens.

Thanks,
-- 
Ezequiel Garc?a, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com