* [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support V3
2013-03-26 1:34 [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3 Magnus Damm
@ 2013-03-26 1:34 ` Magnus Damm
2013-03-26 1:34 ` [PATCH 02/04] ARM: shmobile: r8a73a4 SCIF " Magnus Damm
` (4 subsequent siblings)
5 siblings, 0 replies; 22+ messages in thread
From: Magnus Damm @ 2013-03-26 1:34 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm@opensource.se>
V3 of initial support for the r8a73a4 SoC including:
- Single Cortex-A15 CPU Core
- GIC
- Architecture timer
No static virtual mappings are used, all the components
make use of ioremap(). DT_MACHINE_START is still wrapped
in CONFIG_USE_OF to match other mach-shmobile code.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
Changes since V2:
- Tied in cpg_mapping on all currently supported root clocks
arch/arm/boot/dts/r8a73a4.dtsi | 55 +++++++++++++++
arch/arm/mach-shmobile/Kconfig | 7 +
arch/arm/mach-shmobile/Makefile | 1
arch/arm/mach-shmobile/clock-r8a73a4.c | 91 +++++++++++++++++++++++++
arch/arm/mach-shmobile/include/mach/r8a73a4.h | 7 +
arch/arm/mach-shmobile/setup-r8a73a4.c | 50 +++++++++++++
6 files changed, 211 insertions(+)
--- /dev/null
+++ work/arch/arm/boot/dts/r8a73a4.dtsi 2013-03-26 09:26:54.000000000 +0900
@@ -0,0 +1,55 @@
+/*
+ * Device Tree Source for the r8a73a4 SoC
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "renesas,r8a73a4";
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+ clock-frequency = <1500000000>;
+ };
+ };
+
+ gic: interrupt-controller at f1001000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0xf1001000 0x1000>,
+ <0xf1002000 0x1000>,
+ <0xf1004000 0x2000>,
+ <0xf1006000 0x2000>;
+ interrupts = <1 9 0xf04>;
+
+ gic-cpuif at 4 {
+ compatible = "arm,gic-cpuif";
+ cpuif-id = <4>;
+ cpu = <&cpu0>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ };
+};
--- 0001/arch/arm/mach-shmobile/Kconfig
+++ work/arch/arm/mach-shmobile/Kconfig 2013-03-26 09:26:53.000000000 +0900
@@ -18,6 +18,13 @@ config ARCH_SH73A0
select SH_CLK_CPG
select RENESAS_INTC_IRQPIN
+config ARCH_R8A73A4
+ bool "R-Mobile APE6 (R8A73A40)"
+ select ARM_GIC
+ select CPU_V7
+ select ARM_ARCH_TIMER
+ select SH_CLK_CPG
+
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
select ARCH_WANT_OPTIONAL_GPIOLIB
--- 0001/arch/arm/mach-shmobile/Makefile
+++ work/arch/arm/mach-shmobile/Makefile 2013-03-26 09:26:53.000000000 +0900
@@ -8,6 +8,7 @@ obj-y := timer.o console.o clock.o
# CPU objects
obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o
obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o
+obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o clock-r8a73a4.o
obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o
obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o
obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o clock-emev2.o
--- /dev/null
+++ work/arch/arm/mach-shmobile/clock-r8a73a4.c 2013-03-26 10:13:44.000000000 +0900
@@ -0,0 +1,91 @@
+/*
+ * r8a73a4 clock framework support
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/sh_clk.h>
+#include <linux/clkdev.h>
+#include <mach/common.h>
+
+#define CPG_BASE 0xe6150000
+#define CPG_LEN 0x270
+
+#define MPCKCR 0xe6150080
+
+static struct clk_mapping cpg_mapping = {
+ .phys = CPG_BASE,
+ .len = CPG_LEN,
+};
+
+static struct clk extalr_clk = {
+ .rate = 32768,
+ .mapping = &cpg_mapping,
+};
+
+static struct clk extal1_clk = {
+ .rate = 26000000,
+ .mapping = &cpg_mapping,
+};
+
+static struct clk extal2_clk = {
+ .rate = 48000000,
+ .mapping = &cpg_mapping,
+};
+
+static struct clk *main_clks[] = {
+ &extalr_clk,
+ &extal1_clk,
+ &extal2_clk,
+};
+
+enum { MSTP_NR };
+static struct clk mstp_clks[MSTP_NR] = {
+};
+
+static struct clk_lookup lookups[] = {
+};
+
+void __init r8a73a4_clock_init(void)
+{
+ void __iomem *cpg_base, *reg;
+ int k, ret = 0;
+
+ /* fix MPCLK to EXTAL2 for now.
+ * this is needed until more detailed clock topology is supported
+ */
+ cpg_base = ioremap_nocache(CPG_BASE, CPG_LEN);
+ BUG_ON(!cpg_base);
+ reg = cpg_base + (MPCKCR - CPG_BASE);
+ iowrite32(ioread32(reg) | 1 << 7 | 0x0c, reg); /* set CKSEL */
+ iounmap(cpg_base);
+
+ for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+ ret = clk_register(main_clks[k]);
+
+ if (!ret)
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+ if (!ret)
+ shmobile_clk_init();
+ else
+ panic("failed to setup r8a73a4 clocks\n");
+}
--- /dev/null
+++ work/arch/arm/mach-shmobile/include/mach/r8a73a4.h 2013-03-26 09:26:54.000000000 +0900
@@ -0,0 +1,7 @@
+#ifndef __ASM_R8A73A4_H__
+#define __ASM_R8A73A4_H__
+
+void r8a73a4_add_standard_devices(void);
+void r8a73a4_clock_init(void);
+
+#endif /* __ASM_R8A73A4_H__ */
--- /dev/null
+++ work/arch/arm/mach-shmobile/setup-r8a73a4.c 2013-03-26 09:26:54.000000000 +0900
@@ -0,0 +1,50 @@
+/*
+ * r8a73a4 processor support
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/r8a73a4.h>
+#include <asm/mach/arch.h>
+
+void __init r8a73a4_add_standard_devices(void)
+{
+}
+
+#ifdef CONFIG_USE_OF
+void __init r8a73a4_add_standard_devices_dt(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *r8a73a4_boards_compat_dt[] __initdata = {
+ "renesas,r8a73a4",
+ NULL,
+};
+
+DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
+ .init_irq = irqchip_init,
+ .init_machine = r8a73a4_add_standard_devices_dt,
+ .init_time = shmobile_timer_init,
+ .dt_compat = r8a73a4_boards_compat_dt,
+MACHINE_END
+#endif /* CONFIG_USE_OF */
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 02/04] ARM: shmobile: r8a73a4 SCIF support V3
2013-03-26 1:34 [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3 Magnus Damm
2013-03-26 1:34 ` [PATCH 01/04] ARM: shmobile: Initial " Magnus Damm
@ 2013-03-26 1:34 ` Magnus Damm
2013-03-26 1:34 ` [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2 Magnus Damm
` (3 subsequent siblings)
5 siblings, 0 replies; 22+ messages in thread
From: Magnus Damm @ 2013-03-26 1:34 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm@opensource.se>
V3 of SCIF serial port support for the r8a73a4 SoC.
This is done by adding platform devices for SCIFA0
-> SCIFA1 as well as SCIFB0 -> SCIFB3 together with
clock bindings. DT device description is excluded at
this point since such bindings are still under
development.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
Changes since V2:
- Fixed a bug where PORT_SCIFA was always selected regardless of port type
Changes since V1:
- Replaced static platform devices with array of platform data
together with a call to platform_device_register_data()
arch/arm/mach-shmobile/clock-r8a73a4.c | 15 ++++++++++-
arch/arm/mach-shmobile/setup-r8a73a4.c | 43 ++++++++++++++++++++++++++++++++
2 files changed, 57 insertions(+), 1 deletion(-)
--- 0003/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ work/arch/arm/mach-shmobile/clock-r8a73a4.c 2013-03-26 10:14:50.000000000 +0900
@@ -28,6 +28,7 @@
#define CPG_LEN 0x270
#define MPCKCR 0xe6150080
+#define SMSTPCR2 0xe6150138
static struct clk_mapping cpg_mapping = {
.phys = CPG_BASE,
@@ -55,11 +56,23 @@ static struct clk *main_clks[] = {
&extal2_clk,
};
-enum { MSTP_NR };
+enum { MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP_NR };
static struct clk mstp_clks[MSTP_NR] = {
+ [MSTP204] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
+ [MSTP203] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
+ [MSTP206] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
+ [MSTP207] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
+ [MSTP216] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
+ [MSTP217] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 17, 0), /* SCIFB3 */
};
static struct clk_lookup lookups[] = {
+ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
+ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
+ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
+ CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
+ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
+ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]),
};
void __init r8a73a4_clock_init(void)
--- 0003/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ work/arch/arm/mach-shmobile/setup-r8a73a4.c 2013-03-26 10:15:08.000000000 +0900
@@ -21,13 +21,56 @@
#include <linux/irqchip.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
+#include <linux/serial_sci.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a73a4.h>
#include <asm/mach/arch.h>
+#define SCIF_COMMON(scif_type, baseaddr, irq) \
+ .type = scif_type, \
+ .mapbase = baseaddr, \
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
+ .scbrr_algo_id = SCBRR_ALGO_4, \
+ .irqs = SCIx_IRQ_MUXED(irq)
+
+#define SCIFA_DATA(index, baseaddr, irq) \
+[index] = { \
+ SCIF_COMMON(PORT_SCIFA, baseaddr, irq), \
+ .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE0, \
+}
+
+#define SCIFB_DATA(index, baseaddr, irq) \
+[index] = { \
+ SCIF_COMMON(PORT_SCIFB, baseaddr, irq), \
+ .scscr = SCSCR_RE | SCSCR_TE, \
+}
+
+enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFB3 };
+
+static const struct plat_sci_port scif[] = {
+ SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
+ SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
+ SCIFB_DATA(SCIFB0, 0xe6c50000, gic_spi(145)), /* SCIFB0 */
+ SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
+ SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
+ SCIFB_DATA(SCIFB3, 0xe6cf0000, gic_spi(151)), /* SCIFB3 */
+};
+
+static inline void r8a73a4_register_scif(int idx)
+{
+ platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
+ sizeof(struct plat_sci_port));
+}
+
void __init r8a73a4_add_standard_devices(void)
{
+ r8a73a4_register_scif(SCIFA0);
+ r8a73a4_register_scif(SCIFA1);
+ r8a73a4_register_scif(SCIFB0);
+ r8a73a4_register_scif(SCIFB1);
+ r8a73a4_register_scif(SCIFB2);
+ r8a73a4_register_scif(SCIFB3);
}
#ifdef CONFIG_USE_OF
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2
2013-03-26 1:34 [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3 Magnus Damm
2013-03-26 1:34 ` [PATCH 01/04] ARM: shmobile: Initial " Magnus Damm
2013-03-26 1:34 ` [PATCH 02/04] ARM: shmobile: r8a73a4 SCIF " Magnus Damm
@ 2013-03-26 1:34 ` Magnus Damm
2013-03-26 1:34 ` [PATCH 04/04] ARM: shmobile: r8a73a4 PFC support Magnus Damm
` (2 subsequent siblings)
5 siblings, 0 replies; 22+ messages in thread
From: Magnus Damm @ 2013-03-26 1:34 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm@opensource.se>
Add IRQC interrupt controller support to r8a73a4 by
hooking up two IRQC instances to handle 58 external
IRQ signals. There IRQC controllers are tied to SPIs
of the GIC. On r8a73a4 exact IRQ pin routing is handled
by the PFC which is excluded from this patch.
Both platform devices and DT devices are added in this
patch. The platform device versions are used to provide
a static interrupt map configuration for board code
written in C.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
Change since V1:
- Use platform_device_register_resndata() instead of static platform device
Depends on:
[PATCH] irqchip: Renesas IRQC driver
[PATCH] irqchip: irqc: Add DT support
arch/arm/boot/dts/r8a73a4.dtsi | 32 ++++++++++++
arch/arm/mach-shmobile/Kconfig | 1
arch/arm/mach-shmobile/setup-r8a73a4.c | 84 ++++++++++++++++++++++++++++++++
3 files changed, 117 insertions(+)
--- 0003/arch/arm/boot/dts/r8a73a4.dtsi
+++ work/arch/arm/boot/dts/r8a73a4.dtsi 2013-03-18 21:28:49.000000000 +0900
@@ -52,4 +52,36 @@
<1 11 0xf08>,
<1 10 0xf08>;
};
+
+ irqc0: interrupt-controller at e61c0000 {
+ compatible = "renesas,irqc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0xe61c0000 0x200>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>,
+ <0 4 4>, <0 5 4>, <0 6 4>, <0 7 4>,
+ <0 8 4>, <0 9 4>, <0 10 4>, <0 11 4>,
+ <0 12 4>, <0 13 4>, <0 14 4>, <0 15 4>,
+ <0 16 4>, <0 17 4>, <0 18 4>, <0 19 4>,
+ <0 20 4>, <0 21 4>, <0 22 4>, <0 23 4>,
+ <0 24 4>, <0 25 4>, <0 26 4>, <0 27 4>,
+ <0 28 4>, <0 29 4>, <0 30 4>, <0 31 4>;
+ };
+
+ irqc1: interrupt-controller at e61c0200 {
+ compatible = "renesas,irqc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0xe61c0200 0x200>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 32 4>, <0 33 4>, <0 34 4>, <0 35 4>,
+ <0 36 4>, <0 37 4>, <0 38 4>, <0 39 4>,
+ <0 40 4>, <0 41 4>, <0 42 4>, <0 43 4>,
+ <0 44 4>, <0 45 4>, <0 46 4>, <0 47 4>,
+ <0 48 4>, <0 49 4>, <0 50 4>, <0 51 4>,
+ <0 52 4>, <0 53 4>, <0 54 4>, <0 55 4>,
+ <0 56 4>, <0 57 4>;
+ };
+
};
--- 0003/arch/arm/mach-shmobile/Kconfig
+++ work/arch/arm/mach-shmobile/Kconfig 2013-03-18 21:28:49.000000000 +0900
@@ -24,6 +24,7 @@ config ARCH_R8A73A4
select CPU_V7
select ARM_ARCH_TIMER
select SH_CLK_CPG
+ select RENESAS_IRQC
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
--- 0004/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ work/arch/arm/mach-shmobile/setup-r8a73a4.c 2013-03-18 21:29:11.000000000 +0900
@@ -21,6 +21,7 @@
#include <linux/irqchip.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
+#include <linux/platform_data/irq-renesas-irqc.h>
#include <linux/serial_sci.h>
#include <mach/common.h>
#include <mach/irqs.h>
@@ -63,6 +64,87 @@ static inline void r8a73a4_register_scif
sizeof(struct plat_sci_port));
}
+static const struct renesas_irqc_config irqc0_data = {
+ .irq_base = irq_pin(0), /* IRQ0 -> IRQ31 */
+};
+
+static const struct resource irqc0_resources[] = {
+ DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
+ DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
+ DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
+ DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */
+ DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */
+ DEFINE_RES_IRQ(gic_spi(4)), /* IRQ4 */
+ DEFINE_RES_IRQ(gic_spi(5)), /* IRQ5 */
+ DEFINE_RES_IRQ(gic_spi(6)), /* IRQ6 */
+ DEFINE_RES_IRQ(gic_spi(7)), /* IRQ7 */
+ DEFINE_RES_IRQ(gic_spi(8)), /* IRQ8 */
+ DEFINE_RES_IRQ(gic_spi(9)), /* IRQ9 */
+ DEFINE_RES_IRQ(gic_spi(10)), /* IRQ10 */
+ DEFINE_RES_IRQ(gic_spi(11)), /* IRQ11 */
+ DEFINE_RES_IRQ(gic_spi(12)), /* IRQ12 */
+ DEFINE_RES_IRQ(gic_spi(13)), /* IRQ13 */
+ DEFINE_RES_IRQ(gic_spi(14)), /* IRQ14 */
+ DEFINE_RES_IRQ(gic_spi(15)), /* IRQ15 */
+ DEFINE_RES_IRQ(gic_spi(16)), /* IRQ16 */
+ DEFINE_RES_IRQ(gic_spi(17)), /* IRQ17 */
+ DEFINE_RES_IRQ(gic_spi(18)), /* IRQ18 */
+ DEFINE_RES_IRQ(gic_spi(19)), /* IRQ19 */
+ DEFINE_RES_IRQ(gic_spi(20)), /* IRQ20 */
+ DEFINE_RES_IRQ(gic_spi(21)), /* IRQ21 */
+ DEFINE_RES_IRQ(gic_spi(22)), /* IRQ22 */
+ DEFINE_RES_IRQ(gic_spi(23)), /* IRQ23 */
+ DEFINE_RES_IRQ(gic_spi(24)), /* IRQ24 */
+ DEFINE_RES_IRQ(gic_spi(25)), /* IRQ25 */
+ DEFINE_RES_IRQ(gic_spi(26)), /* IRQ26 */
+ DEFINE_RES_IRQ(gic_spi(27)), /* IRQ27 */
+ DEFINE_RES_IRQ(gic_spi(28)), /* IRQ28 */
+ DEFINE_RES_IRQ(gic_spi(29)), /* IRQ29 */
+ DEFINE_RES_IRQ(gic_spi(30)), /* IRQ30 */
+ DEFINE_RES_IRQ(gic_spi(31)), /* IRQ31 */
+};
+
+static const struct renesas_irqc_config irqc1_data = {
+ .irq_base = irq_pin(32), /* IRQ32 -> IRQ57 */
+};
+
+static const struct resource irqc1_resources[] = {
+ DEFINE_RES_MEM(0xe61c0200, 0x200), /* IRQC Event Detector Block_1 */
+ DEFINE_RES_IRQ(gic_spi(32)), /* IRQ32 */
+ DEFINE_RES_IRQ(gic_spi(33)), /* IRQ33 */
+ DEFINE_RES_IRQ(gic_spi(34)), /* IRQ34 */
+ DEFINE_RES_IRQ(gic_spi(35)), /* IRQ35 */
+ DEFINE_RES_IRQ(gic_spi(36)), /* IRQ36 */
+ DEFINE_RES_IRQ(gic_spi(37)), /* IRQ37 */
+ DEFINE_RES_IRQ(gic_spi(38)), /* IRQ38 */
+ DEFINE_RES_IRQ(gic_spi(39)), /* IRQ39 */
+ DEFINE_RES_IRQ(gic_spi(40)), /* IRQ40 */
+ DEFINE_RES_IRQ(gic_spi(41)), /* IRQ41 */
+ DEFINE_RES_IRQ(gic_spi(42)), /* IRQ42 */
+ DEFINE_RES_IRQ(gic_spi(43)), /* IRQ43 */
+ DEFINE_RES_IRQ(gic_spi(44)), /* IRQ44 */
+ DEFINE_RES_IRQ(gic_spi(45)), /* IRQ45 */
+ DEFINE_RES_IRQ(gic_spi(46)), /* IRQ46 */
+ DEFINE_RES_IRQ(gic_spi(47)), /* IRQ47 */
+ DEFINE_RES_IRQ(gic_spi(48)), /* IRQ48 */
+ DEFINE_RES_IRQ(gic_spi(49)), /* IRQ49 */
+ DEFINE_RES_IRQ(gic_spi(50)), /* IRQ50 */
+ DEFINE_RES_IRQ(gic_spi(51)), /* IRQ51 */
+ DEFINE_RES_IRQ(gic_spi(52)), /* IRQ52 */
+ DEFINE_RES_IRQ(gic_spi(53)), /* IRQ53 */
+ DEFINE_RES_IRQ(gic_spi(54)), /* IRQ54 */
+ DEFINE_RES_IRQ(gic_spi(55)), /* IRQ55 */
+ DEFINE_RES_IRQ(gic_spi(56)), /* IRQ56 */
+ DEFINE_RES_IRQ(gic_spi(57)), /* IRQ57 */
+};
+
+#define r8a73a4_register_irqc(idx) \
+ platform_device_register_resndata(&platform_bus, "renesas_irqc", \
+ idx, irqc##idx##_resources, \
+ ARRAY_SIZE(irqc##idx##_resources), \
+ &irqc##idx##_data, \
+ sizeof(struct renesas_irqc_config))
+
void __init r8a73a4_add_standard_devices(void)
{
r8a73a4_clock_init();
@@ -73,6 +155,8 @@ void __init r8a73a4_add_standard_devices
r8a73a4_register_scif(SCIFB1);
r8a73a4_register_scif(SCIFB2);
r8a73a4_register_scif(SCIFB3);
+ r8a73a4_register_irqc(0);
+ r8a73a4_register_irqc(1);
}
#ifdef CONFIG_USE_OF
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 04/04] ARM: shmobile: r8a73a4 PFC support
2013-03-26 1:34 [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3 Magnus Damm
` (2 preceding siblings ...)
2013-03-26 1:34 ` [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2 Magnus Damm
@ 2013-03-26 1:34 ` Magnus Damm
2013-03-26 6:17 ` [PATCH 0/1] ARM: shmobile: r8a73a4 thermal support Kuninori Morimoto
2013-03-26 11:48 ` [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3 Arnd Bergmann
5 siblings, 0 replies; 22+ messages in thread
From: Magnus Damm @ 2013-03-26 1:34 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm@opensource.se>
Add a platform device for the r8a73a4 PFC.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
No build time dependency, but requires PFC tables
in separate patch series to actually do something.
arch/arm/mach-shmobile/Kconfig | 1 +
arch/arm/mach-shmobile/include/mach/r8a73a4.h | 1 +
arch/arm/mach-shmobile/setup-r8a73a4.c | 10 ++++++++++
3 files changed, 12 insertions(+)
--- 0005/arch/arm/mach-shmobile/Kconfig
+++ work/arch/arm/mach-shmobile/Kconfig 2013-03-18 18:51:13.000000000 +0900
@@ -20,6 +20,7 @@ config ARCH_SH73A0
config ARCH_R8A73A4
bool "R-Mobile APE6 (R8A73A40)"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
select ARM_ARCH_TIMER
--- 0003/arch/arm/mach-shmobile/include/mach/r8a73a4.h
+++ work/arch/arm/mach-shmobile/include/mach/r8a73a4.h 2013-03-18 18:51:13.000000000 +0900
@@ -3,5 +3,6 @@
void r8a73a4_add_standard_devices(void);
void r8a73a4_clock_init(void);
+void r8a73a4_pinmux_init(void);
#endif /* __ASM_R8A73A4_H__ */
--- 0005/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ work/arch/arm/mach-shmobile/setup-r8a73a4.c 2013-03-18 18:53:50.000000000 +0900
@@ -28,6 +28,16 @@
#include <mach/r8a73a4.h>
#include <asm/mach/arch.h>
+static const struct resource pfc_resources[] = {
+ DEFINE_RES_MEM(0xe6050000, 0x9000),
+};
+
+void __init r8a73a4_pinmux_init(void)
+{
+ platform_device_register_simple("pfc-r8a73a4", -1, pfc_resources,
+ ARRAY_SIZE(pfc_resources));
+}
+
#define SCIF_COMMON(scif_type, baseaddr, irq) \
.type = PORT_SCIFA, \
.mapbase = baseaddr, \
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 0/1] ARM: shmobile: r8a73a4 thermal support
2013-03-26 1:34 [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3 Magnus Damm
` (3 preceding siblings ...)
2013-03-26 1:34 ` [PATCH 04/04] ARM: shmobile: r8a73a4 PFC support Magnus Damm
@ 2013-03-26 6:17 ` Kuninori Morimoto
2013-03-26 6:18 ` [PATCH] ARM: shmobile: r8a73a4: add thermal driver support Kuninori Morimoto
2013-03-27 5:21 ` [PATCH 0/1] ARM: shmobile: r8a73a4 thermal support Simon Horman
2013-03-26 11:48 ` [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3 Arnd Bergmann
5 siblings, 2 replies; 22+ messages in thread
From: Kuninori Morimoto @ 2013-03-26 6:17 UTC (permalink / raw)
To: linux-arm-kernel
Hi Simon, Magnus
This patch add thermal driver support on r8a73a4.
> ARM: shmobile: r8a73a4 SoC support V3
> [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support V3
> [PATCH 02/04] ARM: shmobile: r8a73a4 SCIF support V3
> [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2
> [PATCH 04/04] ARM: shmobile: r8a73a4 PFC support
This patch is based on...
simon/next branch
And, Magnus's
ARM: shmobile: r8a73a4 SoC support V3
sh-pfc: Initial r8a73a4 PFC support
ARM: shmobile: r8a73a4 APE6EVM board support V2
And, Zhang's (= PM ML)
f0e68fc3caf677e834f7bd0f601800e686b56c98
(thermal: rcar: fix missing unlock on error in rcar_thermal_update_temp())
fb84d9907f0ff0e3f7d70d55039ddf0f78d2a472
(thermal: rcar_thermal: propagate return value of thermal_zone_device_register)
And, my previous
thermal: rcar: tidyup registration failure case
thermal: rcar: add pm_runtime_xxx() support
Simon, please let me know if you need my help
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH] ARM: shmobile: r8a73a4: add thermal driver support
2013-03-26 6:17 ` [PATCH 0/1] ARM: shmobile: r8a73a4 thermal support Kuninori Morimoto
@ 2013-03-26 6:18 ` Kuninori Morimoto
2013-03-27 5:17 ` Simon Horman
2013-03-27 12:11 ` Simon Horman
2013-03-27 5:21 ` [PATCH 0/1] ARM: shmobile: r8a73a4 thermal support Simon Horman
1 sibling, 2 replies; 22+ messages in thread
From: Kuninori Morimoto @ 2013-03-26 6:18 UTC (permalink / raw)
To: linux-arm-kernel
You can get current thermal by
> cat /sys/class/thermal/thermal_zone?/temp
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
arch/arm/boot/dts/r8a73a4.dtsi | 7 +++++++
arch/arm/mach-shmobile/clock-r8a73a4.c | 13 ++++++++++++-
arch/arm/mach-shmobile/setup-r8a73a4.c | 15 +++++++++++++++
3 files changed, 34 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 4c68ba1..7db5b50 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -84,4 +84,11 @@
<0 56 4>, <0 57 4>;
};
+ thermal at e61f0000 {
+ compatible = "renesas,rcar-thermal";
+ reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>,
+ <0xe61f0200 0x38>, <0xe61f0300 0x38>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 69 4>;
+ };
};
diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index 037713b..e710c00 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -29,6 +29,7 @@
#define MPCKCR 0xe6150080
#define SMSTPCR2 0xe6150138
+#define SMSTPCR5 0xe6150144
static struct clk_mapping cpg_mapping = {
.phys = CPG_BASE,
@@ -56,7 +57,12 @@ static struct clk *main_clks[] = {
&extal2_clk,
};
-enum { MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP_NR };
+enum {
+ MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203,
+ MSTP522,
+ MSTP_NR
+};
+
static struct clk mstp_clks[MSTP_NR] = {
[MSTP204] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
[MSTP203] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
@@ -64,6 +70,7 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP207] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
[MSTP216] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
[MSTP217] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 17, 0), /* SCIFB3 */
+ [MSTP522] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR5, 22, 0), /* Thermal */
};
static struct clk_lookup lookups[] = {
@@ -73,6 +80,10 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]),
+ CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
+
+ /* for DT */
+ CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
};
void __init r8a73a4_clock_init(void)
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index c2d86f3..c5a75a7 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -155,6 +155,20 @@ static const struct resource irqc1_resources[] = {
&irqc##idx##_data, \
sizeof(struct renesas_irqc_config))
+/* Thermal0 -> Thermal2 */
+static const struct resource thermal0_resources[] = {
+ DEFINE_RES_MEM(0xe61f0000, 0x14),
+ DEFINE_RES_MEM(0xe61f0100, 0x38),
+ DEFINE_RES_MEM(0xe61f0200, 0x38),
+ DEFINE_RES_MEM(0xe61f0300, 0x38),
+ DEFINE_RES_IRQ(gic_spi(69)),
+};
+
+#define r8a73a4_register_thermal() \
+ platform_device_register_simple("rcar_thermal", -1, \
+ thermal0_resources, \
+ ARRAY_SIZE(thermal0_resources))
+
void __init r8a73a4_add_standard_devices(void)
{
r8a73a4_register_scif(SCIFA0);
@@ -165,6 +179,7 @@ void __init r8a73a4_add_standard_devices(void)
r8a73a4_register_scif(SCIFB3);
r8a73a4_register_irqc(0);
r8a73a4_register_irqc(1);
+ r8a73a4_register_thermal();
}
#ifdef CONFIG_USE_OF
--
1.7.9.5
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH] ARM: shmobile: r8a73a4: add thermal driver support
2013-03-26 6:18 ` [PATCH] ARM: shmobile: r8a73a4: add thermal driver support Kuninori Morimoto
@ 2013-03-27 5:17 ` Simon Horman
2013-03-27 9:19 ` Magnus Damm
2013-03-27 12:11 ` Simon Horman
1 sibling, 1 reply; 22+ messages in thread
From: Simon Horman @ 2013-03-27 5:17 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Mar 25, 2013 at 11:18:15PM -0700, Kuninori Morimoto wrote:
> You can get current thermal by
> > cat /sys/class/thermal/thermal_zone?/temp
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Thanks Morimoto-san.
Magnus, if you are ok with this change could you either:
* Let me know that your r8a73a4 is ready to be queued-up or;
* Include this patch in the next post of your r8a73a4 series with the
following at the top of the body of the email.
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
> arch/arm/boot/dts/r8a73a4.dtsi | 7 +++++++
> arch/arm/mach-shmobile/clock-r8a73a4.c | 13 ++++++++++++-
> arch/arm/mach-shmobile/setup-r8a73a4.c | 15 +++++++++++++++
> 3 files changed, 34 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
> index 4c68ba1..7db5b50 100644
> --- a/arch/arm/boot/dts/r8a73a4.dtsi
> +++ b/arch/arm/boot/dts/r8a73a4.dtsi
> @@ -84,4 +84,11 @@
> <0 56 4>, <0 57 4>;
> };
>
> + thermal at e61f0000 {
> + compatible = "renesas,rcar-thermal";
> + reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>,
> + <0xe61f0200 0x38>, <0xe61f0300 0x38>;
> + interrupt-parent = <&gic>;
> + interrupts = <0 69 4>;
> + };
> };
> diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
> index 037713b..e710c00 100644
> --- a/arch/arm/mach-shmobile/clock-r8a73a4.c
> +++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
> @@ -29,6 +29,7 @@
>
> #define MPCKCR 0xe6150080
> #define SMSTPCR2 0xe6150138
> +#define SMSTPCR5 0xe6150144
>
> static struct clk_mapping cpg_mapping = {
> .phys = CPG_BASE,
> @@ -56,7 +57,12 @@ static struct clk *main_clks[] = {
> &extal2_clk,
> };
>
> -enum { MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP_NR };
> +enum {
> + MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203,
> + MSTP522,
> + MSTP_NR
> +};
> +
> static struct clk mstp_clks[MSTP_NR] = {
> [MSTP204] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
> [MSTP203] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
> @@ -64,6 +70,7 @@ static struct clk mstp_clks[MSTP_NR] = {
> [MSTP207] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
> [MSTP216] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
> [MSTP217] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 17, 0), /* SCIFB3 */
> + [MSTP522] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR5, 22, 0), /* Thermal */
> };
>
> static struct clk_lookup lookups[] = {
> @@ -73,6 +80,10 @@ static struct clk_lookup lookups[] = {
> CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
> CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
> CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]),
> + CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
> +
> + /* for DT */
> + CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
> };
>
> void __init r8a73a4_clock_init(void)
> diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
> index c2d86f3..c5a75a7 100644
> --- a/arch/arm/mach-shmobile/setup-r8a73a4.c
> +++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
> @@ -155,6 +155,20 @@ static const struct resource irqc1_resources[] = {
> &irqc##idx##_data, \
> sizeof(struct renesas_irqc_config))
>
> +/* Thermal0 -> Thermal2 */
> +static const struct resource thermal0_resources[] = {
> + DEFINE_RES_MEM(0xe61f0000, 0x14),
> + DEFINE_RES_MEM(0xe61f0100, 0x38),
> + DEFINE_RES_MEM(0xe61f0200, 0x38),
> + DEFINE_RES_MEM(0xe61f0300, 0x38),
> + DEFINE_RES_IRQ(gic_spi(69)),
> +};
> +
> +#define r8a73a4_register_thermal() \
> + platform_device_register_simple("rcar_thermal", -1, \
> + thermal0_resources, \
> + ARRAY_SIZE(thermal0_resources))
> +
> void __init r8a73a4_add_standard_devices(void)
> {
> r8a73a4_register_scif(SCIFA0);
> @@ -165,6 +179,7 @@ void __init r8a73a4_add_standard_devices(void)
> r8a73a4_register_scif(SCIFB3);
> r8a73a4_register_irqc(0);
> r8a73a4_register_irqc(1);
> + r8a73a4_register_thermal();
> }
>
> #ifdef CONFIG_USE_OF
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH] ARM: shmobile: r8a73a4: add thermal driver support
2013-03-27 5:17 ` Simon Horman
@ 2013-03-27 9:19 ` Magnus Damm
0 siblings, 0 replies; 22+ messages in thread
From: Magnus Damm @ 2013-03-27 9:19 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Mar 27, 2013 at 2:17 PM, Simon Horman <horms@verge.net.au> wrote:
> On Mon, Mar 25, 2013 at 11:18:15PM -0700, Kuninori Morimoto wrote:
>> You can get current thermal by
>> > cat /sys/class/thermal/thermal_zone?/temp
>>
>> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
>
> Thanks Morimoto-san.
>
> Magnus, if you are ok with this change could you either:
>
> * Let me know that your r8a73a4 is ready to be queued-up or;
The r8a73a4 SoC code is ready to be queued up! Please apply this patch
on top of that series. This code is also part of support for the
actual SoC, so keeping it together with the other SoC bits makes sense
at least to me!
Acked-by: Magnus Damm <damm@opensource.se>
Thanks for your help Morimoto-san and Simon.
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH] ARM: shmobile: r8a73a4: add thermal driver support
2013-03-26 6:18 ` [PATCH] ARM: shmobile: r8a73a4: add thermal driver support Kuninori Morimoto
2013-03-27 5:17 ` Simon Horman
@ 2013-03-27 12:11 ` Simon Horman
1 sibling, 0 replies; 22+ messages in thread
From: Simon Horman @ 2013-03-27 12:11 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Mar 25, 2013 at 11:18:15PM -0700, Kuninori Morimoto wrote:
> You can get current thermal by
> > cat /sys/class/thermal/thermal_zone?/temp
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
> arch/arm/boot/dts/r8a73a4.dtsi | 7 +++++++
> arch/arm/mach-shmobile/clock-r8a73a4.c | 13 ++++++++++++-
> arch/arm/mach-shmobile/setup-r8a73a4.c | 15 +++++++++++++++
> 3 files changed, 34 insertions(+), 1 deletion(-)
Queued up for v3.10 in the soc branch.
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 0/1] ARM: shmobile: r8a73a4 thermal support
2013-03-26 6:17 ` [PATCH 0/1] ARM: shmobile: r8a73a4 thermal support Kuninori Morimoto
2013-03-26 6:18 ` [PATCH] ARM: shmobile: r8a73a4: add thermal driver support Kuninori Morimoto
@ 2013-03-27 5:21 ` Simon Horman
2013-03-27 7:49 ` Kuninori Morimoto
2013-03-27 9:17 ` Magnus Damm
1 sibling, 2 replies; 22+ messages in thread
From: Simon Horman @ 2013-03-27 5:21 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Mar 25, 2013 at 11:17:06PM -0700, Kuninori Morimoto wrote:
>
> Hi Simon, Magnus
>
> This patch add thermal driver support on r8a73a4.
>
> > ARM: shmobile: r8a73a4 SoC support V3
> > [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support V3
> > [PATCH 02/04] ARM: shmobile: r8a73a4 SCIF support V3
> > [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2
> > [PATCH 04/04] ARM: shmobile: r8a73a4 PFC support
>
> This patch is based on...
>
> simon/next branch
>
> And, Magnus's
> ARM: shmobile: r8a73a4 SoC support V3
> sh-pfc: Initial r8a73a4 PFC support
> ARM: shmobile: r8a73a4 APE6EVM board support V2
>
> And, Zhang's (= PM ML)
>
> f0e68fc3caf677e834f7bd0f601800e686b56c98
> (thermal: rcar: fix missing unlock on error in rcar_thermal_update_temp())
>
> fb84d9907f0ff0e3f7d70d55039ddf0f78d2a472
> (thermal: rcar_thermal: propagate return value of thermal_zone_device_register)
>
> And, my previous
> thermal: rcar: tidyup registration failure case
> thermal: rcar: add pm_runtime_xxx() support
>
> Simon, please let me know if you need my help
I think that I need to get a branch to base my changes on.
Do you know if such a branch exists and who we should contact
to make sure it is ok to use it as a base?
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 0/1] ARM: shmobile: r8a73a4 thermal support
2013-03-27 5:21 ` [PATCH 0/1] ARM: shmobile: r8a73a4 thermal support Simon Horman
@ 2013-03-27 7:49 ` Kuninori Morimoto
2013-03-27 9:17 ` Magnus Damm
1 sibling, 0 replies; 22+ messages in thread
From: Kuninori Morimoto @ 2013-03-27 7:49 UTC (permalink / raw)
To: linux-arm-kernel
Hi Simon
Thank you for your help
> > Simon, please let me know if you need my help
>
> I think that I need to get a branch to base my changes on.
> Do you know if such a branch exists and who we should contact
> to make sure it is ok to use it as a base?
Could you please contact to Zhang who is maintainer of thermal driver.
Zhang Rui <rui.zhang@intel.com>
His git branch is
http://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
Best regards
---
Kuninori Morimoto
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 0/1] ARM: shmobile: r8a73a4 thermal support
2013-03-27 5:21 ` [PATCH 0/1] ARM: shmobile: r8a73a4 thermal support Simon Horman
2013-03-27 7:49 ` Kuninori Morimoto
@ 2013-03-27 9:17 ` Magnus Damm
2013-03-27 12:09 ` Simon Horman
2013-03-27 12:10 ` Simon Horman
1 sibling, 2 replies; 22+ messages in thread
From: Magnus Damm @ 2013-03-27 9:17 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Mar 27, 2013 at 2:21 PM, Simon Horman <horms@verge.net.au> wrote:
> On Mon, Mar 25, 2013 at 11:17:06PM -0700, Kuninori Morimoto wrote:
>>
>> Hi Simon, Magnus
>>
>> This patch add thermal driver support on r8a73a4.
>>
>> > ARM: shmobile: r8a73a4 SoC support V3
>> > [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support V3
>> > [PATCH 02/04] ARM: shmobile: r8a73a4 SCIF support V3
>> > [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2
>> > [PATCH 04/04] ARM: shmobile: r8a73a4 PFC support
>>
>> This patch is based on...
>>
>> simon/next branch
>>
>> And, Magnus's
>> ARM: shmobile: r8a73a4 SoC support V3
>> sh-pfc: Initial r8a73a4 PFC support
>> ARM: shmobile: r8a73a4 APE6EVM board support V2
>>
>> And, Zhang's (= PM ML)
>>
>> f0e68fc3caf677e834f7bd0f601800e686b56c98
>> (thermal: rcar: fix missing unlock on error in rcar_thermal_update_temp())
>>
>> fb84d9907f0ff0e3f7d70d55039ddf0f78d2a472
>> (thermal: rcar_thermal: propagate return value of thermal_zone_device_register)
>>
>> And, my previous
>> thermal: rcar: tidyup registration failure case
>> thermal: rcar: add pm_runtime_xxx() support
>>
>> Simon, please let me know if you need my help
>
> I think that I need to get a branch to base my changes on.
> Do you know if such a branch exists and who we should contact
> to make sure it is ok to use it as a base?
Hi Simon,
I have now tested patch "[PATCH] ARM: shmobile: r8a73a4: add thermal
driver support" on real hardware.
I have exercised this patch by applying the following patches on top
of renesas-next-20130321:
[PATCH] ARM: shmobile: Disallow PINCTRL without GPIOLIB
[PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3
[PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support V3
[PATCH 02/04] ARM: shmobile: r8a73a4 SCIF support V3
[PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2
[PATCH 04/04] ARM: shmobile: r8a73a4 PFC support
[PATCH] ARM: shmobile: r8a73a4: add thermal driver support
Judging by the patch list above I believe you can just throw this
patch in on top of the "r8a73a4 SoC V3" patches.
As Morimoto-san explained, there are some runtime dependencies related
to various bug fixes in the thermal driver. But for merging and
compiling I believe the above should be enough.
Thanks,
/ magnus
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 0/1] ARM: shmobile: r8a73a4 thermal support
2013-03-27 9:17 ` Magnus Damm
@ 2013-03-27 12:09 ` Simon Horman
2013-03-27 12:10 ` Simon Horman
1 sibling, 0 replies; 22+ messages in thread
From: Simon Horman @ 2013-03-27 12:09 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Mar 27, 2013 at 06:17:24PM +0900, Magnus Damm wrote:
> On Wed, Mar 27, 2013 at 2:21 PM, Simon Horman <horms@verge.net.au> wrote:
> > On Mon, Mar 25, 2013 at 11:17:06PM -0700, Kuninori Morimoto wrote:
> >>
> >> Hi Simon, Magnus
> >>
> >> This patch add thermal driver support on r8a73a4.
> >>
> >> > ARM: shmobile: r8a73a4 SoC support V3
> >> > [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support V3
> >> > [PATCH 02/04] ARM: shmobile: r8a73a4 SCIF support V3
> >> > [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2
> >> > [PATCH 04/04] ARM: shmobile: r8a73a4 PFC support
> >>
> >> This patch is based on...
> >>
> >> simon/next branch
> >>
> >> And, Magnus's
> >> ARM: shmobile: r8a73a4 SoC support V3
> >> sh-pfc: Initial r8a73a4 PFC support
> >> ARM: shmobile: r8a73a4 APE6EVM board support V2
> >>
> >> And, Zhang's (= PM ML)
> >>
> >> f0e68fc3caf677e834f7bd0f601800e686b56c98
> >> (thermal: rcar: fix missing unlock on error in rcar_thermal_update_temp())
> >>
> >> fb84d9907f0ff0e3f7d70d55039ddf0f78d2a472
> >> (thermal: rcar_thermal: propagate return value of thermal_zone_device_register)
These are both in v3.9-rc4, which I can use as a base.
> >> And, my previous
> >> thermal: rcar: tidyup registration failure case
> >> thermal: rcar: add pm_runtime_xxx() support
I'm not sure that this patch (ARM: shmobile: r8a73a4 thermal support)
actually depends on the above two patches. I would be quite convenient for
me if they didn't.
> >> Simon, please let me know if you need my help
> >
> > I think that I need to get a branch to base my changes on.
> > Do you know if such a branch exists and who we should contact
> > to make sure it is ok to use it as a base?
>
> Hi Simon,
>
> I have now tested patch "[PATCH] ARM: shmobile: r8a73a4: add thermal
> driver support" on real hardware.
>
> I have exercised this patch by applying the following patches on top
> of renesas-next-20130321:
> [PATCH] ARM: shmobile: Disallow PINCTRL without GPIOLIB
> [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3
> [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support V3
> [PATCH 02/04] ARM: shmobile: r8a73a4 SCIF support V3
> [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2
> [PATCH 04/04] ARM: shmobile: r8a73a4 PFC support
> [PATCH] ARM: shmobile: r8a73a4: add thermal driver support
>
> Judging by the patch list above I believe you can just throw this
> patch in on top of the "r8a73a4 SoC V3" patches.
>
> As Morimoto-san explained, there are some runtime dependencies related
> to various bug fixes in the thermal driver. But for merging and
> compiling I believe the above should be enough.
>
> Thanks,
>
> / magnus
>
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 0/1] ARM: shmobile: r8a73a4 thermal support
2013-03-27 9:17 ` Magnus Damm
2013-03-27 12:09 ` Simon Horman
@ 2013-03-27 12:10 ` Simon Horman
1 sibling, 0 replies; 22+ messages in thread
From: Simon Horman @ 2013-03-27 12:10 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Mar 27, 2013 at 06:17:24PM +0900, Magnus Damm wrote:
> On Wed, Mar 27, 2013 at 2:21 PM, Simon Horman <horms@verge.net.au> wrote:
> > On Mon, Mar 25, 2013 at 11:17:06PM -0700, Kuninori Morimoto wrote:
> >>
> >> Hi Simon, Magnus
> >>
> >> This patch add thermal driver support on r8a73a4.
> >>
> >> > ARM: shmobile: r8a73a4 SoC support V3
> >> > [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support V3
> >> > [PATCH 02/04] ARM: shmobile: r8a73a4 SCIF support V3
> >> > [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2
> >> > [PATCH 04/04] ARM: shmobile: r8a73a4 PFC support
> >>
> >> This patch is based on...
> >>
> >> simon/next branch
> >>
> >> And, Magnus's
> >> ARM: shmobile: r8a73a4 SoC support V3
> >> sh-pfc: Initial r8a73a4 PFC support
> >> ARM: shmobile: r8a73a4 APE6EVM board support V2
> >>
> >> And, Zhang's (= PM ML)
> >>
> >> f0e68fc3caf677e834f7bd0f601800e686b56c98
> >> (thermal: rcar: fix missing unlock on error in rcar_thermal_update_temp())
> >>
> >> fb84d9907f0ff0e3f7d70d55039ddf0f78d2a472
> >> (thermal: rcar_thermal: propagate return value of thermal_zone_device_register)
> >>
> >> And, my previous
> >> thermal: rcar: tidyup registration failure case
> >> thermal: rcar: add pm_runtime_xxx() support
> >>
> >> Simon, please let me know if you need my help
> >
> > I think that I need to get a branch to base my changes on.
> > Do you know if such a branch exists and who we should contact
> > to make sure it is ok to use it as a base?
>
> Hi Simon,
>
> I have now tested patch "[PATCH] ARM: shmobile: r8a73a4: add thermal
> driver support" on real hardware.
>
> I have exercised this patch by applying the following patches on top
> of renesas-next-20130321:
> [PATCH] ARM: shmobile: Disallow PINCTRL without GPIOLIB
> [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3
> [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support V3
> [PATCH 02/04] ARM: shmobile: r8a73a4 SCIF support V3
> [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2
> [PATCH 04/04] ARM: shmobile: r8a73a4 PFC support
> [PATCH] ARM: shmobile: r8a73a4: add thermal driver support
>
> Judging by the patch list above I believe you can just throw this
> patch in on top of the "r8a73a4 SoC V3" patches.
>
> As Morimoto-san explained, there are some runtime dependencies related
> to various bug fixes in the thermal driver. But for merging and
> compiling I believe the above should be enough.
Ok, I think that should be fine. I will do as you suggest.
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3
2013-03-26 1:34 [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3 Magnus Damm
` (4 preceding siblings ...)
2013-03-26 6:17 ` [PATCH 0/1] ARM: shmobile: r8a73a4 thermal support Kuninori Morimoto
@ 2013-03-26 11:48 ` Arnd Bergmann
2013-03-26 14:17 ` Magnus Damm
5 siblings, 1 reply; 22+ messages in thread
From: Arnd Bergmann @ 2013-03-26 11:48 UTC (permalink / raw)
To: linux-arm-kernel
On Tuesday 26 March 2013, Magnus Damm wrote:
> ARM: shmobile: r8a73a4 SoC support V3
> [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support V3
> [PATCH 02/04] ARM: shmobile: r8a73a4 SCIF support V3
> [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2
> [PATCH 04/04] ARM: shmobile: r8a73a4 PFC support
>
> This series is V3 of initial support for the r8a73a4 SoC. The SoC
> is known as r8a73a4 which is built around Cortex-A15 and makes use
> of SCIF for serial, IRQC interrupt controller for external IRQs and
> PFC for combined support for pinmux and GPIO.
>
Acked-by: Arnd Bergmann <arnd@arndb.de>
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3
2013-03-26 11:48 ` [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3 Arnd Bergmann
@ 2013-03-26 14:17 ` Magnus Damm
2013-03-27 3:46 ` Simon Horman
0 siblings, 1 reply; 22+ messages in thread
From: Magnus Damm @ 2013-03-26 14:17 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Mar 26, 2013 at 8:48 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Tuesday 26 March 2013, Magnus Damm wrote:
>> ARM: shmobile: r8a73a4 SoC support V3
>> [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support V3
>> [PATCH 02/04] ARM: shmobile: r8a73a4 SCIF support V3
>> [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2
>> [PATCH 04/04] ARM: shmobile: r8a73a4 PFC support
>>
>> This series is V3 of initial support for the r8a73a4 SoC. The SoC
>> is known as r8a73a4 which is built around Cortex-A15 and makes use
>> of SCIF for serial, IRQC interrupt controller for external IRQs and
>> PFC for combined support for pinmux and GPIO.
>>
>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
Thanks for your help!
/ magnus
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3
2013-03-26 14:17 ` Magnus Damm
@ 2013-03-27 3:46 ` Simon Horman
2013-03-27 8:19 ` Magnus Damm
0 siblings, 1 reply; 22+ messages in thread
From: Simon Horman @ 2013-03-27 3:46 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Mar 26, 2013 at 11:17:43PM +0900, Magnus Damm wrote:
> On Tue, Mar 26, 2013 at 8:48 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> > On Tuesday 26 March 2013, Magnus Damm wrote:
> >> ARM: shmobile: r8a73a4 SoC support V3
> >> [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support V3
> >> [PATCH 02/04] ARM: shmobile: r8a73a4 SCIF support V3
> >> [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2
> >> [PATCH 04/04] ARM: shmobile: r8a73a4 PFC support
> >>
> >> This series is V3 of initial support for the r8a73a4 SoC. The SoC
> >> is known as r8a73a4 which is built around Cortex-A15 and makes use
> >> of SCIF for serial, IRQC interrupt controller for external IRQs and
> >> PFC for combined support for pinmux and GPIO.
> >>
> >
> > Acked-by: Arnd Bergmann <arnd@arndb.de>
>
> Thanks for your help!
Indeed.
Magnus, please let me know if/when you would like me to queue-up these
patches.
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3
2013-03-27 3:46 ` Simon Horman
@ 2013-03-27 8:19 ` Magnus Damm
2013-03-27 11:45 ` Simon Horman
0 siblings, 1 reply; 22+ messages in thread
From: Magnus Damm @ 2013-03-27 8:19 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Mar 27, 2013 at 12:46 PM, Simon Horman <horms@verge.net.au> wrote:
> On Tue, Mar 26, 2013 at 11:17:43PM +0900, Magnus Damm wrote:
>> On Tue, Mar 26, 2013 at 8:48 PM, Arnd Bergmann <arnd@arndb.de> wrote:
>> > On Tuesday 26 March 2013, Magnus Damm wrote:
>> >> ARM: shmobile: r8a73a4 SoC support V3
>> >> [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support V3
>> >> [PATCH 02/04] ARM: shmobile: r8a73a4 SCIF support V3
>> >> [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2
>> >> [PATCH 04/04] ARM: shmobile: r8a73a4 PFC support
>> >>
>> >> This series is V3 of initial support for the r8a73a4 SoC. The SoC
>> >> is known as r8a73a4 which is built around Cortex-A15 and makes use
>> >> of SCIF for serial, IRQC interrupt controller for external IRQs and
>> >> PFC for combined support for pinmux and GPIO.
>> >>
>> >
>> > Acked-by: Arnd Bergmann <arnd@arndb.de>
>>
>> Thanks for your help!
>
> Indeed.
>
> Magnus, please let me know if/when you would like me to queue-up these
> patches.
Thanks. Since you bring up the topic, I'd like you to queue up this
patch series more or less right away if possible. =)
About how to handle the dependencies, I am not sure if you intend to
keep the SoC bits separate from the PFC and the board code. It is
possible to split it out by series but if that is needed or not
depends on how the ARM SoC guys want to be fed.
Regardless, this r8a73a4 SoC V3 series depends on the following patch
to compile:
[PATCH/RFC] ARM: shmobile: Disallow PINCTRL without GPIOLIB
Laurent seems OK with the patch above, how about you? I am quite OK
with the above patch as a short term fix. But I believe Linus W and
Laurent at some point need to decide if it is valid to have PINCTL
selected without GPIO.
Thanks,
/ magnus
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3
2013-03-27 8:19 ` Magnus Damm
@ 2013-03-27 11:45 ` Simon Horman
2013-03-27 12:01 ` Simon Horman
0 siblings, 1 reply; 22+ messages in thread
From: Simon Horman @ 2013-03-27 11:45 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Mar 27, 2013 at 05:19:55PM +0900, Magnus Damm wrote:
> On Wed, Mar 27, 2013 at 12:46 PM, Simon Horman <horms@verge.net.au> wrote:
> > On Tue, Mar 26, 2013 at 11:17:43PM +0900, Magnus Damm wrote:
> >> On Tue, Mar 26, 2013 at 8:48 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> >> > On Tuesday 26 March 2013, Magnus Damm wrote:
> >> >> ARM: shmobile: r8a73a4 SoC support V3
> >> >> [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support V3
> >> >> [PATCH 02/04] ARM: shmobile: r8a73a4 SCIF support V3
> >> >> [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2
> >> >> [PATCH 04/04] ARM: shmobile: r8a73a4 PFC support
> >> >>
> >> >> This series is V3 of initial support for the r8a73a4 SoC. The SoC
> >> >> is known as r8a73a4 which is built around Cortex-A15 and makes use
> >> >> of SCIF for serial, IRQC interrupt controller for external IRQs and
> >> >> PFC for combined support for pinmux and GPIO.
> >> >>
> >> >
> >> > Acked-by: Arnd Bergmann <arnd@arndb.de>
> >>
> >> Thanks for your help!
> >
> > Indeed.
> >
> > Magnus, please let me know if/when you would like me to queue-up these
> > patches.
>
> Thanks. Since you bring up the topic, I'd like you to queue up this
> patch series more or less right away if possible. =)
Sure, I think it is possible.
> About how to handle the dependencies, I am not sure if you intend to
> keep the SoC bits separate from the PFC and the board code. It is
> possible to split it out by series but if that is needed or not
> depends on how the ARM SoC guys want to be fed.
I would prefer if they were separated out so that I can apply
them to separate branches, in keeping with arm-soc requirements.
The branches can depend on each other which is how any dependencies
can be handled.
At this point I am thinking of merging the soc branch, with this
series added, into the pinmux branch and then applying the r8a73a4 pfc
patches to the result.
> Regardless, this r8a73a4 SoC V3 series depends on the following patch
> to compile:
> [PATCH/RFC] ARM: shmobile: Disallow PINCTRL without GPIOLIB
>
> Laurent seems OK with the patch above, how about you? I am quite OK
> with the above patch as a short term fix. But I believe Linus W and
> Laurent at some point need to decide if it is valid to have PINCTL
> selected without GPIO.
I think I will take it into my tree as this series relies on it.
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3
2013-03-27 11:45 ` Simon Horman
@ 2013-03-27 12:01 ` Simon Horman
2013-03-27 16:37 ` Magnus Damm
0 siblings, 1 reply; 22+ messages in thread
From: Simon Horman @ 2013-03-27 12:01 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Mar 27, 2013 at 08:45:54PM +0900, Simon Horman wrote:
> On Wed, Mar 27, 2013 at 05:19:55PM +0900, Magnus Damm wrote:
> > On Wed, Mar 27, 2013 at 12:46 PM, Simon Horman <horms@verge.net.au> wrote:
> > > On Tue, Mar 26, 2013 at 11:17:43PM +0900, Magnus Damm wrote:
> > >> On Tue, Mar 26, 2013 at 8:48 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> > >> > On Tuesday 26 March 2013, Magnus Damm wrote:
> > >> >> ARM: shmobile: r8a73a4 SoC support V3
> > >> >> [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support V3
> > >> >> [PATCH 02/04] ARM: shmobile: r8a73a4 SCIF support V3
> > >> >> [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2
> > >> >> [PATCH 04/04] ARM: shmobile: r8a73a4 PFC support
> > >> >>
> > >> >> This series is V3 of initial support for the r8a73a4 SoC. The SoC
> > >> >> is known as r8a73a4 which is built around Cortex-A15 and makes use
> > >> >> of SCIF for serial, IRQC interrupt controller for external IRQs and
> > >> >> PFC for combined support for pinmux and GPIO.
> > >> >>
> > >> >
> > >> > Acked-by: Arnd Bergmann <arnd@arndb.de>
> > >>
> > >> Thanks for your help!
> > >
> > > Indeed.
> > >
> > > Magnus, please let me know if/when you would like me to queue-up these
> > > patches.
> >
> > Thanks. Since you bring up the topic, I'd like you to queue up this
> > patch series more or less right away if possible. =)
>
> Sure, I think it is possible.
I have applied the series to the soc branch with Arnd's Ack.
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3
2013-03-27 12:01 ` Simon Horman
@ 2013-03-27 16:37 ` Magnus Damm
0 siblings, 0 replies; 22+ messages in thread
From: Magnus Damm @ 2013-03-27 16:37 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Mar 27, 2013 at 9:01 PM, Simon Horman <horms@verge.net.au> wrote:
> On Wed, Mar 27, 2013 at 08:45:54PM +0900, Simon Horman wrote:
>> On Wed, Mar 27, 2013 at 05:19:55PM +0900, Magnus Damm wrote:
>> > On Wed, Mar 27, 2013 at 12:46 PM, Simon Horman <horms@verge.net.au> wrote:
>> > > On Tue, Mar 26, 2013 at 11:17:43PM +0900, Magnus Damm wrote:
>> > >> On Tue, Mar 26, 2013 at 8:48 PM, Arnd Bergmann <arnd@arndb.de> wrote:
>> > >> > On Tuesday 26 March 2013, Magnus Damm wrote:
>> > >> >> ARM: shmobile: r8a73a4 SoC support V3
>> > >> >> [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support V3
>> > >> >> [PATCH 02/04] ARM: shmobile: r8a73a4 SCIF support V3
>> > >> >> [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2
>> > >> >> [PATCH 04/04] ARM: shmobile: r8a73a4 PFC support
>> > >> >>
>> > >> >> This series is V3 of initial support for the r8a73a4 SoC. The SoC
>> > >> >> is known as r8a73a4 which is built around Cortex-A15 and makes use
>> > >> >> of SCIF for serial, IRQC interrupt controller for external IRQs and
>> > >> >> PFC for combined support for pinmux and GPIO.
>> > >> >>
>> > >> >
>> > >> > Acked-by: Arnd Bergmann <arnd@arndb.de>
>> > >>
>> > >> Thanks for your help!
>> > >
>> > > Indeed.
>> > >
>> > > Magnus, please let me know if/when you would like me to queue-up these
>> > > patches.
>> >
>> > Thanks. Since you bring up the topic, I'd like you to queue up this
>> > patch series more or less right away if possible. =)
>>
>> Sure, I think it is possible.
>
> I have applied the series to the soc branch with Arnd's Ack.
Thank you!
/ magnus
^ permalink raw reply [flat|nested] 22+ messages in thread