From: catalin.marinas@arm.com (Catalin Marinas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4] ARM: tlb: don't perform inner-shareable invalidation for local TLB ops
Date: Wed, 27 Mar 2013 12:30:55 +0000 [thread overview]
Message-ID: <20130327123054.GF1603@MacBook-Pro.local> (raw)
In-Reply-To: <20130327120737.GB17185@mudshark.cambridge.arm.com>
On Wed, Mar 27, 2013 at 12:07:37PM +0000, Will Deacon wrote:
> Cheers for looking at this.
Just warming up for Marc's KVM patches ;)
> On Wed, Mar 27, 2013 at 10:34:30AM +0000, Catalin Marinas wrote:
> > On Mon, Mar 25, 2013 at 06:19:38PM +0000, Will Deacon wrote:
> > > @@ -352,22 +369,33 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
> > > dsb();
> > >
> > > if (possible_tlb_flags & (TLB_V3_FULL|TLB_V4_U_FULL|TLB_V4_D_FULL|TLB_V4_I_FULL)) {
> > > - if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
> > > + if (!cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) {
> > > tlb_op(TLB_V3_FULL, "c6, c0, 0", zero);
> > > tlb_op(TLB_V4_U_FULL, "c8, c7, 0", zero);
> > > tlb_op(TLB_V4_D_FULL, "c8, c6, 0", zero);
> > > tlb_op(TLB_V4_I_FULL, "c8, c5, 0", zero);
> > > }
> > > - put_cpu();
> >
> > Why is this change needed? You only flush the local TLB if the mm never
> > wasn't active on this processor?
>
> Ouch, that's a cock-up, sorry. I'll remove the '!'.
Do we also need to disable preemtion?
> > > @@ -398,6 +426,21 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
> > > tlb_op(TLB_V6_U_PAGE, "c8, c7, 1", uaddr);
> > > tlb_op(TLB_V6_D_PAGE, "c8, c6, 1", uaddr);
> > > tlb_op(TLB_V6_I_PAGE, "c8, c5, 1", uaddr);
> > > +
> > > + if (tlb_flag(TLB_BARRIER))
> > > + dsb();
> > > +}
> > > +
> > > +static inline void
> > > +__flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
> > > +{
> > > + const unsigned int __tlb_flag = __cpu_tlb_flags;
> > > +
> > > + uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm);
> > > +
> > > + if (tlb_flag(TLB_WB))
> > > + dsb();
> > > +
> >
> > I guess here we could just have a single *_tlb_page() variant. I
> > couldn't find any place where we call the local_flush_tlb_page()
> > explicitly, I guess we don't really need local semantics. On ARMv6 SMP,
> > they are local anyway.
> >
> > If we have a single *_tlb_page() function, you would need to drop the
> > TLB_V6_*_PAGE from the v8 possible TLB ops.
>
> Having the local variant doesn't hurt though, and provides the same symmetry
> as other architectures (powerpc, sh, tile, mips, ...).
It's probably harmless to have them, though they may not get used.
> > > #ifdef CONFIG_ARM_ERRATA_720789
> > > tlb_op(TLB_V7_UIS_PAGE, "c8, c3, 3", uaddr & PAGE_MASK);
> > > #else
> > > @@ -428,6 +471,22 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
> > > tlb_op(TLB_V6_U_PAGE, "c8, c7, 1", kaddr);
> > > tlb_op(TLB_V6_D_PAGE, "c8, c6, 1", kaddr);
> > > tlb_op(TLB_V6_I_PAGE, "c8, c5, 1", kaddr);
> > > +
> > > + if (tlb_flag(TLB_BARRIER)) {
> > > + dsb();
> > > + isb();
> > > + }
> > > +}
> >
> > I have some worries with this function. It is used by set_top_pte() and
> > it really doesn't look like it has local-only semantics. For example,
> > you use it do flush the I-cache aliases and this must target all the
> > CPUs because of speculative prefetches, which means that set_top_pte()
> > must set the new alias on all the CPUs.
>
> This looks like a bug in set_top_pte when it's called for cache-flushing.
> However, the only core this would affect is 11MPCore, which uses the
> ipi-based flushing anyway, so I think we're ok.
I don't think its 11MPCore only, set_top_pte() is called by
flush_icache_alias() from flush_ptrace_access() even on ARMv7.
> > Highmem mappings need to be revisited as well.
>
> I think they're ok. Everything is either done in atomic context or under a
> raw spinlock, so the mappings aren't expected to be used by other CPUs.
It's not whether they are used explicitly but whether a speculative TLB
load can bring them in on a different CPU. I don't immediately see a
problem with non-aliasing caches but needs some more thinking.
--
Catalin
next prev parent reply other threads:[~2013-03-27 12:30 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-25 18:19 [PATCH 0/4] TLB and mm-related optimisations Will Deacon
2013-03-25 18:19 ` [PATCH 1/4] ARM: tlb: don't perform inner-shareable invalidation for local TLB ops Will Deacon
2013-03-27 10:34 ` Catalin Marinas
2013-03-27 12:07 ` Will Deacon
2013-03-27 12:30 ` Catalin Marinas [this message]
2013-03-27 12:56 ` Will Deacon
2013-03-27 13:40 ` Catalin Marinas
2013-03-27 13:54 ` Will Deacon
2013-03-25 18:19 ` [PATCH 2/4] ARM: tlb: don't perform inner-shareable invalidation for local BP ops Will Deacon
2013-03-27 10:36 ` Catalin Marinas
2013-03-25 18:19 ` [PATCH 3/4] ARM: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead Will Deacon
2013-03-27 10:53 ` Catalin Marinas
2013-03-27 12:20 ` Will Deacon
2013-05-15 13:18 ` Gregory CLEMENT
2013-05-15 13:41 ` Will Deacon
2013-05-15 13:54 ` Gregory CLEMENT
2013-05-15 14:06 ` Will Deacon
2013-05-15 14:46 ` Gregory CLEMENT
2013-05-15 15:04 ` Will Deacon
2013-05-15 15:36 ` Gregory CLEMENT
2013-05-15 15:41 ` Will Deacon
2013-05-15 16:29 ` Gregory CLEMENT
2013-05-15 16:48 ` Will Deacon
2013-05-15 17:16 ` Russell King - ARM Linux
2013-03-25 18:19 ` [PATCH 4/4] ARM: atomics: don't use exclusives for atomic64 read/set with LPAE Will Deacon
2013-03-27 10:57 ` Catalin Marinas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130327123054.GF1603@MacBook-Pro.local \
--to=catalin.marinas@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).