[PATCH v2 0/5] ARM: imx cpufreq-cpu0

[PATCH v2 0/5] ARM: imx cpufreq-cpu0

[Markus Pargmann]

Hi,

This patch series adds imx cpufreq-cpu0 support by adding cpufreq-cpu0
platform devices in DT init code of imx27 and imx5.

It also removes the old imx-cpufreq driver.

Regards,

Markus

Changes in v2:
- Remove old imx-cpufreq driver
- Add cpufreq-cpu0 platform devices as required for the latest
  cpufreq-cpu0 driver.

[PATCH v2 1/5] cpufreq: cpufreq-cpu0: Fix documentation example

[Markus Pargmann]

The example includes a property 'transition-latency', which should be
clock-latency.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
 Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
index 4416ccc..051f764 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
@@ -32,7 +32,7 @@ cpus {
 			396000  950000
 			198000  850000
 		>;
-		transition-latency = <61036>; /* two CLK32 periods */
+		clock-latency = <61036>; /* two CLK32 periods */
 	};
 
 	cpu at 1 {
-- 
1.8.1.5

[PATCH v2 1/5] cpufreq: cpufreq-cpu0: Fix documentation example

[Shawn Guo]

On Wed, Mar 27, 2013 at 02:01:30PM +0100, Markus Pargmann wrote:
> The example includes a property 'transition-latency', which should be
> clock-latency.
> 

Viresh already sent a fix [1] for that.

Shawn

[1] https://lkml.org/lkml/2013/3/26/267

> Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
> ---
>  Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
> index 4416ccc..051f764 100644
> --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
> @@ -32,7 +32,7 @@ cpus {
>  			396000  950000
>  			198000  850000
>  		>;
> -		transition-latency = <61036>; /* two CLK32 periods */
> +		clock-latency = <61036>; /* two CLK32 periods */
>  	};
>  
>  	cpu at 1 {
> -- 
> 1.8.1.5
> 

[PATCH v2 2/5] ARM: imx27, imx5: Add kconfig selects for cpufreq-cpu0

[Markus Pargmann]

There are some config options not selected by imx27 and imx5 that are
necessary to use the cpufreq-cpu0 driver.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
 arch/arm/mach-imx/Kconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 4c9c6f9..4144fdc 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -128,6 +128,8 @@ config SOC_IMX25
 
 config SOC_IMX27
 	bool
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
 	select COMMON_CLK
 	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
@@ -155,6 +157,7 @@ config SOC_IMX35
 config SOC_IMX5
 	bool
 	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
 	select ARCH_MX5
 	select ARCH_MXC_IOMUX_V3
 	select COMMON_CLK
-- 
1.8.1.5

[PATCH v2 3/5] ARM: imx27 DT init cpufreq-cpu0 device

[Markus Pargmann]

Adds cpufreq-cpu0 platform device for imx27 DT init and adds a clock
registration for cpufreq-cpu0 device.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
 arch/arm/mach-imx/clk-imx27.c | 2 +-
 arch/arm/mach-imx/imx27-dt.c  | 3 +++
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 30b3242..c1d59b8 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -276,7 +276,7 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL);
 	clk_register_clkdev(clk[rtc_ipg_gate], NULL, "imx21-rtc");
 	clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL);
-	clk_register_clkdev(clk[cpu_div], "cpu", NULL);
+	clk_register_clkdev(clk[cpu_div], NULL, "cpufreq-cpu0.0");
 	clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL);
 	clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0");
 	clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1");
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index c915a49..2d7ff9d 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -35,8 +35,11 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
 
 static void __init imx27_dt_init(void)
 {
+	struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
+
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     imx27_auxdata_lookup, NULL);
+	platform_device_register_full(&devinfo);
 }
 
 static const char * const imx27_dt_board_compat[] __initconst = {
-- 
1.8.1.5

[PATCH v2 4/5] ARM: imx5 DT init cpufreq-cpu0 device

[Markus Pargmann]

Add cpufreq-cpu0 platform device for imx5 DT init and register the clock
for imx5.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
 arch/arm/mach-imx/clk-imx51-imx53.c | 2 +-
 arch/arm/mach-imx/imx51-dt.c        | 3 +++
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 0f39f8c..e80d8fd 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -281,7 +281,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk_register_clkdev(clk[ssi_ext1_gate], "ssi_ext1", NULL);
 	clk_register_clkdev(clk[ssi_ext2_gate], "ssi_ext2", NULL);
 	clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
-	clk_register_clkdev(clk[cpu_podf], "cpu", NULL);
+	clk_register_clkdev(clk[cpu_podf], NULL, "cpufreq-cpu0.0");
 	clk_register_clkdev(clk[iim_gate], "iim", NULL);
 	clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.0");
 	clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.1");
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index e2926a8..ab24cc3 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -21,7 +21,10 @@
 
 static void __init imx51_dt_init(void)
 {
+	struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
+
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	platform_device_register_full(&devinfo);
 }
 
 static const char *imx51_dt_board_compat[] __initdata = {
-- 
1.8.1.5

[PATCH v2 5/5] ARM: imx: Remove cpufreq driver

[Markus Pargmann]

The old cpufreq driver is not necessary anymore with DT and
cpufreq-cpu0.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
 arch/arm/Kconfig                      |   7 --
 arch/arm/mach-imx/Makefile            |   1 -
 arch/arm/mach-imx/cpu_op-mx51.c       |  31 -----
 arch/arm/mach-imx/cpu_op-mx51.h       |  14 ---
 arch/arm/mach-imx/cpufreq.c           | 206 ----------------------------------
 arch/arm/mach-imx/mach-cpuimx51sd.c   |   5 -
 arch/arm/mach-imx/mach-mx51_babbage.c |   4 -
 7 files changed, 268 deletions(-)
 delete mode 100644 arch/arm/mach-imx/cpu_op-mx51.c
 delete mode 100644 arch/arm/mach-imx/cpu_op-mx51.h
 delete mode 100644 arch/arm/mach-imx/cpufreq.c

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 13b7394..c5ed84c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2153,13 +2153,6 @@ if ARCH_HAS_CPUFREQ
 
 source "drivers/cpufreq/Kconfig"
 
-config CPU_FREQ_IMX
-	tristate "CPUfreq driver for i.MX CPUs"
-	depends on ARCH_MXC && CPU_FREQ
-	select CPU_FREQ_TABLE
-	help
-	  This enables the CPUfreq driver for i.MX CPUs.
-
 config CPU_FREQ_SA1100
 	bool
 
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index c4ce090..e313433 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -27,7 +27,6 @@ obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
 obj-$(CONFIG_MXC_ULPI) += ulpi.o
 obj-$(CONFIG_MXC_USE_EPIT) += epit.o
 obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
-obj-$(CONFIG_CPU_FREQ_IMX)    += cpufreq.o
 
 ifeq ($(CONFIG_CPU_IDLE),y)
 obj-y += cpuidle.o
diff --git a/arch/arm/mach-imx/cpu_op-mx51.c b/arch/arm/mach-imx/cpu_op-mx51.c
deleted file mode 100644
index b9ef692..0000000
--- a/arch/arm/mach-imx/cpu_op-mx51.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/bug.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include "hardware.h"
-
-static struct cpu_op mx51_cpu_op[] = {
-	{
-	.cpu_rate = 160000000,},
-	{
-	.cpu_rate = 800000000,},
-};
-
-struct cpu_op *mx51_get_cpu_op(int *op)
-{
-	*op = ARRAY_SIZE(mx51_cpu_op);
-	return mx51_cpu_op;
-}
diff --git a/arch/arm/mach-imx/cpu_op-mx51.h b/arch/arm/mach-imx/cpu_op-mx51.h
deleted file mode 100644
index 97477fe..0000000
--- a/arch/arm/mach-imx/cpu_op-mx51.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-extern struct cpu_op *mx51_get_cpu_op(int *op);
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
deleted file mode 100644
index d8c75c3..0000000
--- a/arch/arm/mach-imx/cpufreq.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * A driver for the Freescale Semiconductor i.MXC CPUfreq module.
- * The CPUFREQ driver is for controlling CPU frequency. It allows you to change
- * the CPU clock speed on the fly.
- */
-
-#include <linux/module.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-
-#include "hardware.h"
-
-#define CLK32_FREQ	32768
-#define NANOSECOND	(1000 * 1000 * 1000)
-
-struct cpu_op *(*get_cpu_op)(int *op);
-
-static int cpu_freq_khz_min;
-static int cpu_freq_khz_max;
-
-static struct clk *cpu_clk;
-static struct cpufreq_frequency_table *imx_freq_table;
-
-static int cpu_op_nr;
-static struct cpu_op *cpu_op_tbl;
-
-static int set_cpu_freq(int freq)
-{
-	int ret = 0;
-	int org_cpu_rate;
-
-	org_cpu_rate = clk_get_rate(cpu_clk);
-	if (org_cpu_rate == freq)
-		return ret;
-
-	ret = clk_set_rate(cpu_clk, freq);
-	if (ret != 0) {
-		printk(KERN_DEBUG "cannot set CPU clock rate\n");
-		return ret;
-	}
-
-	return ret;
-}
-
-static int mxc_verify_speed(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	return cpufreq_frequency_table_verify(policy, imx_freq_table);
-}
-
-static unsigned int mxc_get_speed(unsigned int cpu)
-{
-	if (cpu)
-		return 0;
-
-	return clk_get_rate(cpu_clk) / 1000;
-}
-
-static int mxc_set_target(struct cpufreq_policy *policy,
-			  unsigned int target_freq, unsigned int relation)
-{
-	struct cpufreq_freqs freqs;
-	int freq_Hz;
-	int ret = 0;
-	unsigned int index;
-
-	cpufreq_frequency_table_target(policy, imx_freq_table,
-			target_freq, relation, &index);
-	freq_Hz = imx_freq_table[index].frequency * 1000;
-
-	freqs.old = clk_get_rate(cpu_clk) / 1000;
-	freqs.new = freq_Hz / 1000;
-	freqs.cpu = 0;
-	freqs.flags = 0;
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	ret = set_cpu_freq(freq_Hz);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return ret;
-}
-
-static int mxc_cpufreq_init(struct cpufreq_policy *policy)
-{
-	int ret;
-	int i;
-
-	printk(KERN_INFO "i.MXC CPU frequency driver\n");
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	if (!get_cpu_op)
-		return -EINVAL;
-
-	cpu_clk = clk_get(NULL, "cpu_clk");
-	if (IS_ERR(cpu_clk)) {
-		printk(KERN_ERR "%s: failed to get cpu clock\n", __func__);
-		return PTR_ERR(cpu_clk);
-	}
-
-	cpu_op_tbl = get_cpu_op(&cpu_op_nr);
-
-	cpu_freq_khz_min = cpu_op_tbl[0].cpu_rate / 1000;
-	cpu_freq_khz_max = cpu_op_tbl[0].cpu_rate / 1000;
-
-	imx_freq_table = kmalloc(
-		sizeof(struct cpufreq_frequency_table) * (cpu_op_nr + 1),
-			GFP_KERNEL);
-	if (!imx_freq_table) {
-		ret = -ENOMEM;
-		goto err1;
-	}
-
-	for (i = 0; i < cpu_op_nr; i++) {
-		imx_freq_table[i].index = i;
-		imx_freq_table[i].frequency = cpu_op_tbl[i].cpu_rate / 1000;
-
-		if ((cpu_op_tbl[i].cpu_rate / 1000) < cpu_freq_khz_min)
-			cpu_freq_khz_min = cpu_op_tbl[i].cpu_rate / 1000;
-
-		if ((cpu_op_tbl[i].cpu_rate / 1000) > cpu_freq_khz_max)
-			cpu_freq_khz_max = cpu_op_tbl[i].cpu_rate / 1000;
-	}
-
-	imx_freq_table[i].index = i;
-	imx_freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	policy->cur = clk_get_rate(cpu_clk) / 1000;
-	policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min;
-	policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max;
-
-	/* Manual states, that PLL stabilizes in two CLK32 periods */
-	policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ;
-
-	ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table);
-
-	if (ret < 0) {
-		printk(KERN_ERR "%s: failed to register i.MXC CPUfreq with error code %d\n",
-		       __func__, ret);
-		goto err;
-	}
-
-	cpufreq_frequency_table_get_attr(imx_freq_table, policy->cpu);
-	return 0;
-err:
-	kfree(imx_freq_table);
-err1:
-	clk_put(cpu_clk);
-	return ret;
-}
-
-static int mxc_cpufreq_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_put_attr(policy->cpu);
-
-	set_cpu_freq(cpu_freq_khz_max * 1000);
-	clk_put(cpu_clk);
-	kfree(imx_freq_table);
-	return 0;
-}
-
-static struct cpufreq_driver mxc_driver = {
-	.flags = CPUFREQ_STICKY,
-	.verify = mxc_verify_speed,
-	.target = mxc_set_target,
-	.get = mxc_get_speed,
-	.init = mxc_cpufreq_init,
-	.exit = mxc_cpufreq_exit,
-	.name = "imx",
-};
-
-static int mxc_cpufreq_driver_init(void)
-{
-	return cpufreq_register_driver(&mxc_driver);
-}
-
-static void mxc_cpufreq_driver_exit(void)
-{
-	cpufreq_unregister_driver(&mxc_driver);
-}
-
-module_init(mxc_cpufreq_driver_init);
-module_exit(mxc_cpufreq_driver_exit);
-
-MODULE_AUTHOR("Freescale Semiconductor Inc. Yong Shen <yong.shen@linaro.org>");
-MODULE_DESCRIPTION("CPUfreq driver for i.MX");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c
index 9b73932..9b5ddf5 100644
--- a/arch/arm/mach-imx/mach-cpuimx51sd.c
+++ b/arch/arm/mach-imx/mach-cpuimx51sd.c
@@ -33,7 +33,6 @@
 
 #include "common.h"
 #include "devices-imx51.h"
-#include "cpu_op-mx51.h"
 #include "eukrea-baseboards.h"
 #include "hardware.h"
 #include "iomux-mx51.h"
@@ -285,10 +284,6 @@ static void __init eukrea_cpuimx51sd_init(void)
 	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
 					ARRAY_SIZE(eukrea_cpuimx51sd_pads));
 
-#if defined(CONFIG_CPU_FREQ_IMX)
-	get_cpu_op = mx51_get_cpu_op;
-#endif
-
 	imx51_add_imx_uart(0, &uart_pdata);
 	imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
 	imx51_add_imx2_wdt(0);
diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c
index 6c4d7fe..f3d264a 100644
--- a/arch/arm/mach-imx/mach-mx51_babbage.c
+++ b/arch/arm/mach-imx/mach-mx51_babbage.c
@@ -27,7 +27,6 @@
 
 #include "common.h"
 #include "devices-imx51.h"
-#include "cpu_op-mx51.h"
 #include "hardware.h"
 #include "iomux-mx51.h"
 
@@ -371,9 +370,6 @@ static void __init mx51_babbage_init(void)
 
 	imx51_soc_init();
 
-#if defined(CONFIG_CPU_FREQ_IMX)
-	get_cpu_op = mx51_get_cpu_op;
-#endif
 	imx51_babbage_common_init();
 
 	imx51_add_imx_uart(0, &uart_pdata);
-- 
1.8.1.5

[PATCH v2 5/5] ARM: imx: Remove cpufreq driver

[Shawn Guo]

On Wed, Mar 27, 2013 at 02:01:34PM +0100, Markus Pargmann wrote:
> The old cpufreq driver is not necessary anymore with DT and
> cpufreq-cpu0.
> 
> Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
> ---
>  arch/arm/Kconfig                      |   7 --
>  arch/arm/mach-imx/Makefile            |   1 -
>  arch/arm/mach-imx/cpu_op-mx51.c       |  31 -----
>  arch/arm/mach-imx/cpu_op-mx51.h       |  14 ---
>  arch/arm/mach-imx/cpufreq.c           | 206 ----------------------------------
>  arch/arm/mach-imx/mach-cpuimx51sd.c   |   5 -
>  arch/arm/mach-imx/mach-mx51_babbage.c |   4 -
>  7 files changed, 268 deletions(-)
>  delete mode 100644 arch/arm/mach-imx/cpu_op-mx51.c

Target cpu_op-mx51.o should be removed from Makefile then.

I fixed it up and applied the series expect the first patch.  I expect
you will send follow-up patches to add imx51 operating-points into
device tree though.

Shawn

[PATCH v2 5/5] ARM: imx: Remove cpufreq driver

[Markus Pargmann]

On Wed, Mar 27, 2013 at 10:05:31PM +0800, Shawn Guo wrote:
> On Wed, Mar 27, 2013 at 02:01:34PM +0100, Markus Pargmann wrote:
> > The old cpufreq driver is not necessary anymore with DT and
> > cpufreq-cpu0.
> > 
> > Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
> > ---
> >  arch/arm/Kconfig                      |   7 --
> >  arch/arm/mach-imx/Makefile            |   1 -
> >  arch/arm/mach-imx/cpu_op-mx51.c       |  31 -----
> >  arch/arm/mach-imx/cpu_op-mx51.h       |  14 ---
> >  arch/arm/mach-imx/cpufreq.c           | 206 ----------------------------------
> >  arch/arm/mach-imx/mach-cpuimx51sd.c   |   5 -
> >  arch/arm/mach-imx/mach-mx51_babbage.c |   4 -
> >  7 files changed, 268 deletions(-)
> >  delete mode 100644 arch/arm/mach-imx/cpu_op-mx51.c
> 
> Target cpu_op-mx51.o should be removed from Makefile then.
> 
> I fixed it up and applied the series expect the first patch.  I expect
> you will send follow-up patches to add imx51 operating-points into
> device tree though.

Thanks.

I just prepared a patch for mx51 babbage board. cpuimx51sd does not seem
to have a DTS file yet. In general I think the operating points have to
be in the board specific DTS files because the frequencies of imx51
devices are different.

Regards,

Markus

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[PATCH v2 5/5] ARM: imx: Remove cpufreq driver

[Shawn Guo]

On Wed, Mar 27, 2013 at 04:14:54PM +0100, Markus Pargmann wrote:
> I just prepared a patch for mx51 babbage board. cpuimx51sd does not seem
> to have a DTS file yet. In general I think the operating points have to
> be in the board specific DTS files because the frequencies of imx51
> devices are different.

Shouldn't the operating-points generally be SoC specific?  I think we
should have the operating-points recommended by SoC design added in
<soc>.dtsi, and if there is an odd system design requiring different
settings, we can override the operating-points in <board>.dts.

Shawn