[GIT PULL] Renesas ARM SoC updates for v3.10 #2

[GIT PULL] Renesas ARM SoC updates for v3.10 #2

[Simon Horman]

Hi Arnd, Hi Olof,

The following changes since commit 4c82e452732784419fd616cf1acf2bc9b004aae1:

  Merge tag 'renesas-intc-external-irq2-for-v3.10' into soc-base (2013-04-02 10:55:57 +0900)

are available in the git repository at:


  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc2-for-v3.10

for you to fetch changes up to 8585deb18580d04209a2986430aa0959ef38fce2:

  ARM: shmobile: r8a7790 SoC 64-bit DT support (2013-04-02 11:02:21 +0900)

----------------------------------------------------------------
Second round of Renesas ARM SoC updates for v3.10

Some Highlights:

* Add r8a7790 SoC
* Add r8a73a4 SoC
* Migrate r8a7740 SoC from INTC to GIC
* Add thermal driver support to r8a73a4 SoC
* Add irqpin DT nodes to sh73a0 SoC
* Add SCIF support to r8a7778 SoC

This pull request is based on a merge of:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-soc-for-v3.10
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-intc-external-irq2-for-v3.10

----------------------------------------------------------------
Bastian Hecht (1):
      ARM: shmobile: r8a7740: Migrate from INTC to GIC

Guennadi Liakhovetski (3):
      ARM: shmobile: sh73a0: wait for completion when kicking the clock
      ARM: shmobile: sh73a0: add irqpin DT nodes
      ARM: shmobile: sh73a0: add a TWD clock

Kuninori Morimoto (15):
      ARM: shmobile: add R8A7778 basis support
      ARM: shmobile: r8a7778 SCIF support
      ARM: shmobile: r8a73a4: add thermal driver support
      ARM: shmobile: sh73a0: remove DIV4_ZT* clocks
      ARM: shmobile: sh7372: remove DIV4_ZT* clocks
      ARM: shmobile: add struct clk_ratio and fixed ratio clock macro
      ARM: shmobile: sh7372: use fixed ratio clock
      ARM: shmobile: sh73a0: use fixed ratio clock
      ARM: shmobile: r8a7740: tidyup comment/implementation mismatch
      ARM: shmobile: r8a7740: use fixed ratio clock
      ARM: shmobile: r8a7779: remove DIV4 clocks and use fixed ratio clock
      ARM: shmobile: sh7372: move global functions to sh7372.h
      ARM: shmobile: sh73a0: move global functions to sh73a0.h
      ARM: shmobile: r8a7740: move global functions to r8a7740.h
      ARM: shmobile: r8a7779: move global functions to r8a7779.h

Magnus Damm (9):
      ARM: shmobile: Initial r8a73a4 SoC support V3
      ARM: shmobile: r8a73a4 SCIF support V3
      ARM: shmobile: r8a73a4 IRQC support V2
      ARM: shmobile: r8a73a4 PFC support
      ARM: shmobile: Disallow PINCTRL without GPIOLIB
      ARM: shmobile: Initial r8a7790 SoC support
      ARM: shmobile: r8a7790 SCIF support
      ARM: shmobile: r8a7790 IRQC support
      ARM: shmobile: r8a7790 PFC support

Takashi YOSHII (2):
      ARM: shmobile: r8a73a4 SoC 64-bit DT support
      ARM: shmobile: r8a7790 SoC 64-bit DT support

 arch/arm/Kconfig                               |    2 +-
 arch/arm/boot/dts/r8a73a4.dtsi                 |   94 ++++
 arch/arm/boot/dts/r8a7778.dtsi                 |   35 ++
 arch/arm/boot/dts/r8a7790.dtsi                 |   63 +++
 arch/arm/boot/dts/sh73a0.dtsi                  |   81 +++
 arch/arm/mach-shmobile/Kconfig                 |   26 +
 arch/arm/mach-shmobile/Makefile                |    3 +
 arch/arm/mach-shmobile/board-armadillo800eva.c |   35 +-
 arch/arm/mach-shmobile/clock-r8a73a4.c         |  115 +++++
 arch/arm/mach-shmobile/clock-r8a7740.c         |  114 ++---
 arch/arm/mach-shmobile/clock-r8a7778.c         |  104 ++++
 arch/arm/mach-shmobile/clock-r8a7779.c         |  196 ++++----
 arch/arm/mach-shmobile/clock-r8a7790.c         |   93 ++++
 arch/arm/mach-shmobile/clock-sh7372.c          |   50 +-
 arch/arm/mach-shmobile/clock-sh73a0.c          |  115 ++---
 arch/arm/mach-shmobile/clock.c                 |   13 +
 arch/arm/mach-shmobile/include/mach/clock.h    |   39 ++
 arch/arm/mach-shmobile/include/mach/common.h   |   54 --
 arch/arm/mach-shmobile/include/mach/r8a73a4.h  |    8 +
 arch/arm/mach-shmobile/include/mach/r8a7740.h  |    9 +
 arch/arm/mach-shmobile/include/mach/r8a7778.h  |   28 ++
 arch/arm/mach-shmobile/include/mach/r8a7779.h  |   13 +
 arch/arm/mach-shmobile/include/mach/r8a7790.h  |    8 +
 arch/arm/mach-shmobile/include/mach/sh7372.h   |   12 +
 arch/arm/mach-shmobile/include/mach/sh73a0.h   |   15 +
 arch/arm/mach-shmobile/intc-r8a7740.c          |  641 ++----------------------
 arch/arm/mach-shmobile/setup-r8a73a4.c         |  202 ++++++++
 arch/arm/mach-shmobile/setup-r8a7740.c         |  192 +++++--
 arch/arm/mach-shmobile/setup-r8a7778.c         |  193 +++++++
 arch/arm/mach-shmobile/setup-r8a7790.c         |  137 +++++
 drivers/pinctrl/sh-pfc/pfc-r8a7740.c           |   64 +--
 31 files changed, 1732 insertions(+), 1022 deletions(-)
 create mode 100644 arch/arm/boot/dts/r8a73a4.dtsi
 create mode 100644 arch/arm/boot/dts/r8a7778.dtsi
 create mode 100644 arch/arm/boot/dts/r8a7790.dtsi
 create mode 100644 arch/arm/mach-shmobile/clock-r8a73a4.c
 create mode 100644 arch/arm/mach-shmobile/clock-r8a7778.c
 create mode 100644 arch/arm/mach-shmobile/clock-r8a7790.c
 create mode 100644 arch/arm/mach-shmobile/include/mach/clock.h
 create mode 100644 arch/arm/mach-shmobile/include/mach/r8a73a4.h
 create mode 100644 arch/arm/mach-shmobile/include/mach/r8a7778.h
 create mode 100644 arch/arm/mach-shmobile/include/mach/r8a7790.h
 create mode 100644 arch/arm/mach-shmobile/setup-r8a73a4.c
 create mode 100644 arch/arm/mach-shmobile/setup-r8a7778.c
 create mode 100644 arch/arm/mach-shmobile/setup-r8a7790.c

[PATCH 01/30] ARM: shmobile: Initial r8a73a4 SoC support V3

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

V3 of initial support for the r8a73a4 SoC including:
 - Single Cortex-A15 CPU Core
 - GIC
 - Architecture timer

No static virtual mappings are used, all the components
make use of ioremap(). DT_MACHINE_START is still wrapped
in CONFIG_USE_OF to match other mach-shmobile code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a73a4.dtsi                |   55 +++++++++++++++
 arch/arm/mach-shmobile/Kconfig                |    7 ++
 arch/arm/mach-shmobile/Makefile               |    1 +
 arch/arm/mach-shmobile/clock-r8a73a4.c        |   91 +++++++++++++++++++++++++
 arch/arm/mach-shmobile/include/mach/r8a73a4.h |    7 ++
 arch/arm/mach-shmobile/setup-r8a73a4.c        |   50 ++++++++++++++
 6 files changed, 211 insertions(+)
 create mode 100644 arch/arm/boot/dts/r8a73a4.dtsi
 create mode 100644 arch/arm/mach-shmobile/clock-r8a73a4.c
 create mode 100644 arch/arm/mach-shmobile/include/mach/r8a73a4.h
 create mode 100644 arch/arm/mach-shmobile/setup-r8a73a4.c

diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
new file mode 100644
index 0000000..72c58c1
--- /dev/null
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -0,0 +1,55 @@
+/*
+ * Device Tree Source for the r8a73a4 SoC
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "renesas,r8a73a4";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1500000000>;
+		};
+	};
+
+	gic: interrupt-controller at f1001000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0xf1001000 0x1000>,
+			<0xf1002000 0x1000>,
+			<0xf1004000 0x2000>,
+			<0xf1006000 0x2000>;
+		interrupts = <1 9 0xf04>;
+
+		gic-cpuif at 4 {
+			compatible = "arm,gic-cpuif";
+			cpuif-id = <4>;
+			cpu = <&cpu0>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+				<1 14 0xf08>,
+				<1 11 0xf08>,
+				<1 10 0xf08>;
+	};
+};
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 75d413c..663d27b 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -18,6 +18,13 @@ config ARCH_SH73A0
 	select SH_CLK_CPG
 	select RENESAS_INTC_IRQPIN
 
+config ARCH_R8A73A4
+	bool "R-Mobile APE6 (R8A73A40)"
+	select ARM_GIC
+	select CPU_V7
+	select ARM_ARCH_TIMER
+	select SH_CLK_CPG
+
 config ARCH_R8A7740
 	bool "R-Mobile A1 (R8A77400)"
 	select ARCH_WANT_OPTIONAL_GPIOLIB
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index b646ff4..c5a43ef 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -8,6 +8,7 @@ obj-y				:= timer.o console.o clock.o
 # CPU objects
 obj-$(CONFIG_ARCH_SH7372)	+= setup-sh7372.o clock-sh7372.o intc-sh7372.o
 obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o
+obj-$(CONFIG_ARCH_R8A73A4)	+= setup-r8a73a4.o clock-r8a73a4.o
 obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o
 obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o clock-emev2.o
diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
new file mode 100644
index 0000000..15d479d
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -0,0 +1,91 @@
+/*
+ * r8a73a4 clock framework support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/sh_clk.h>
+#include <linux/clkdev.h>
+#include <mach/common.h>
+
+#define CPG_BASE 0xe6150000
+#define CPG_LEN 0x270
+
+#define MPCKCR 0xe6150080
+
+static struct clk_mapping cpg_mapping = {
+	.phys   = CPG_BASE,
+	.len    = CPG_LEN,
+};
+
+static struct clk extalr_clk = {
+	.rate	= 32768,
+	.mapping	= &cpg_mapping,
+};
+
+static struct clk extal1_clk = {
+	.rate	= 26000000,
+	.mapping	= &cpg_mapping,
+};
+
+static struct clk extal2_clk = {
+	.rate	= 48000000,
+	.mapping	= &cpg_mapping,
+};
+
+static struct clk *main_clks[] = {
+	&extalr_clk,
+	&extal1_clk,
+	&extal2_clk,
+};
+
+enum { MSTP_NR };
+static struct clk mstp_clks[MSTP_NR] = {
+};
+
+static struct clk_lookup lookups[] = {
+};
+
+void __init r8a73a4_clock_init(void)
+{
+	void __iomem *cpg_base, *reg;
+	int k, ret = 0;
+
+	/* fix MPCLK to EXTAL2 for now.
+	 * this is needed until more detailed clock topology is supported
+	 */
+	cpg_base = ioremap_nocache(CPG_BASE, CPG_LEN);
+	BUG_ON(!cpg_base);
+	reg = cpg_base + (MPCKCR - CPG_BASE);
+	iowrite32(ioread32(reg) | 1 << 7 | 0x0c, reg); /* set CKSEL */
+	iounmap(cpg_base);
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		shmobile_clk_init();
+	else
+		panic("failed to setup r8a73a4 clocks\n");
+}
diff --git a/arch/arm/mach-shmobile/include/mach/r8a73a4.h b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
new file mode 100644
index 0000000..6db3495
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_R8A73A4_H__
+#define __ASM_R8A73A4_H__
+
+void r8a73a4_add_standard_devices(void);
+void r8a73a4_clock_init(void);
+
+#endif /* __ASM_R8A73A4_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
new file mode 100644
index 0000000..69156bc
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -0,0 +1,50 @@
+/*
+ * r8a73a4 processor support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/r8a73a4.h>
+#include <asm/mach/arch.h>
+
+void __init r8a73a4_add_standard_devices(void)
+{
+}
+
+#ifdef CONFIG_USE_OF
+void __init r8a73a4_add_standard_devices_dt(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *r8a73a4_boards_compat_dt[] __initdata = {
+	"renesas,r8a73a4",
+	NULL,
+};
+
+DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
+	.init_irq	= irqchip_init,
+	.init_machine	= r8a73a4_add_standard_devices_dt,
+	.init_time	= shmobile_timer_init,
+	.dt_compat	= r8a73a4_boards_compat_dt,
+MACHINE_END
+#endif /* CONFIG_USE_OF */
-- 
1.7.10.4

[PATCH 02/30] ARM: shmobile: r8a73a4 SCIF support V3

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

V3 of SCIF serial port support for the r8a73a4 SoC.
This is done by adding platform devices for SCIFA0
-> SCIFA1 as well as SCIFB0 -> SCIFB3 together with
clock bindings. DT device description is excluded at
this point since such bindings are still under
development.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a73a4.c |   15 ++++++++++-
 arch/arm/mach-shmobile/setup-r8a73a4.c |   43 ++++++++++++++++++++++++++++++++
 2 files changed, 57 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index 15d479d..037713b 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -28,6 +28,7 @@
 #define CPG_LEN 0x270
 
 #define MPCKCR 0xe6150080
+#define SMSTPCR2 0xe6150138
 
 static struct clk_mapping cpg_mapping = {
 	.phys   = CPG_BASE,
@@ -55,11 +56,23 @@ static struct clk *main_clks[] = {
 	&extal2_clk,
 };
 
-enum { MSTP_NR };
+enum { MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP_NR };
 static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP204] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
+	[MSTP203] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
+	[MSTP206] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
+	[MSTP207] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
+	[MSTP216] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
+	[MSTP217] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 17, 0), /* SCIFB3 */
 };
 
 static struct clk_lookup lookups[] = {
+	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
+	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
+	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
+	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
+	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
+	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]),
 };
 
 void __init r8a73a4_clock_init(void)
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 69156bc..746a3dc 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -21,13 +21,56 @@
 #include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
+#include <linux/serial_sci.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a73a4.h>
 #include <asm/mach/arch.h>
 
+#define SCIF_COMMON(scif_type, baseaddr, irq)			\
+	.type		= scif_type,				\
+	.mapbase	= baseaddr,				\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
+	.scbrr_algo_id	= SCBRR_ALGO_4,				\
+	.irqs		= SCIx_IRQ_MUXED(irq)
+
+#define SCIFA_DATA(index, baseaddr, irq)		\
+[index] = {						\
+	SCIF_COMMON(PORT_SCIFA, baseaddr, irq),		\
+	.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE0,	\
+}
+
+#define SCIFB_DATA(index, baseaddr, irq)	\
+[index] = {					\
+	SCIF_COMMON(PORT_SCIFB, baseaddr, irq),	\
+	.scscr = SCSCR_RE | SCSCR_TE,		\
+}
+
+enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFB3 };
+
+static const struct plat_sci_port scif[] = {
+	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
+	SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
+	SCIFB_DATA(SCIFB0, 0xe6c50000, gic_spi(145)), /* SCIFB0 */
+	SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
+	SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
+	SCIFB_DATA(SCIFB3, 0xe6cf0000, gic_spi(151)), /* SCIFB3 */
+};
+
+static inline void r8a73a4_register_scif(int idx)
+{
+	platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
+				      sizeof(struct plat_sci_port));
+}
+
 void __init r8a73a4_add_standard_devices(void)
 {
+	r8a73a4_register_scif(SCIFA0);
+	r8a73a4_register_scif(SCIFA1);
+	r8a73a4_register_scif(SCIFB0);
+	r8a73a4_register_scif(SCIFB1);
+	r8a73a4_register_scif(SCIFB2);
+	r8a73a4_register_scif(SCIFB3);
 }
 
 #ifdef CONFIG_USE_OF
-- 
1.7.10.4

[PATCH 03/30] ARM: shmobile: r8a73a4 IRQC support V2

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Add IRQC interrupt controller support to r8a73a4 by
hooking up two IRQC instances to handle 58 external
IRQ signals. There IRQC controllers are tied to SPIs
of the GIC. On r8a73a4 exact IRQ pin routing is handled
by the PFC which is excluded from this patch.

Both platform devices and DT devices are added in this
patch. The platform device versions are used to provide
a static interrupt map configuration for board code
written in C.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a73a4.dtsi         |   32 ++++++++++++
 arch/arm/mach-shmobile/Kconfig         |    1 +
 arch/arm/mach-shmobile/setup-r8a73a4.c |   84 ++++++++++++++++++++++++++++++++
 3 files changed, 117 insertions(+)

diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 72c58c1..4c68ba1 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -52,4 +52,36 @@
 				<1 11 0xf08>,
 				<1 10 0xf08>;
 	};
+
+	irqc0: interrupt-controller at e61c0000 {
+		compatible = "renesas,irqc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe61c0000 0x200>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 0 4>, <0 1 4>, <0 2 4>,	<0 3 4>,
+				<0 4 4>, <0 5 4>, <0 6 4>, <0 7 4>,
+				<0 8 4>, <0 9 4>, <0 10 4>, <0 11 4>,
+				<0 12 4>, <0 13 4>, <0 14 4>, <0 15 4>,
+				<0 16 4>, <0 17 4>, <0 18 4>, <0 19 4>,
+				<0 20 4>, <0 21 4>, <0 22 4>, <0 23 4>,
+				<0 24 4>, <0 25 4>, <0 26 4>, <0 27 4>,
+				<0 28 4>, <0 29 4>, <0 30 4>, <0 31 4>;
+	};
+
+	irqc1: interrupt-controller at e61c0200 {
+		compatible = "renesas,irqc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe61c0200 0x200>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 32 4>, <0 33 4>, <0 34 4>, <0 35 4>,
+				<0 36 4>, <0 37 4>, <0 38 4>, <0 39 4>,
+				<0 40 4>, <0 41 4>, <0 42 4>, <0 43 4>,
+				<0 44 4>, <0 45 4>, <0 46 4>, <0 47 4>,
+				<0 48 4>, <0 49 4>, <0 50 4>, <0 51 4>,
+				<0 52 4>, <0 53 4>, <0 54 4>, <0 55 4>,
+				<0 56 4>, <0 57 4>;
+	};
+
 };
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 663d27b..17a59cd 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -24,6 +24,7 @@ config ARCH_R8A73A4
 	select CPU_V7
 	select ARM_ARCH_TIMER
 	select SH_CLK_CPG
+	select RENESAS_IRQC
 
 config ARCH_R8A7740
 	bool "R-Mobile A1 (R8A77400)"
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 746a3dc..da5ae16 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -21,6 +21,7 @@
 #include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/irq-renesas-irqc.h>
 #include <linux/serial_sci.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
@@ -63,6 +64,87 @@ static inline void r8a73a4_register_scif(int idx)
 				      sizeof(struct plat_sci_port));
 }
 
+static const struct renesas_irqc_config irqc0_data = {
+	.irq_base = irq_pin(0), /* IRQ0 -> IRQ31 */
+};
+
+static const struct resource irqc0_resources[] = {
+	DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
+	DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
+	DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
+	DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */
+	DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */
+	DEFINE_RES_IRQ(gic_spi(4)), /* IRQ4 */
+	DEFINE_RES_IRQ(gic_spi(5)), /* IRQ5 */
+	DEFINE_RES_IRQ(gic_spi(6)), /* IRQ6 */
+	DEFINE_RES_IRQ(gic_spi(7)), /* IRQ7 */
+	DEFINE_RES_IRQ(gic_spi(8)), /* IRQ8 */
+	DEFINE_RES_IRQ(gic_spi(9)), /* IRQ9 */
+	DEFINE_RES_IRQ(gic_spi(10)), /* IRQ10 */
+	DEFINE_RES_IRQ(gic_spi(11)), /* IRQ11 */
+	DEFINE_RES_IRQ(gic_spi(12)), /* IRQ12 */
+	DEFINE_RES_IRQ(gic_spi(13)), /* IRQ13 */
+	DEFINE_RES_IRQ(gic_spi(14)), /* IRQ14 */
+	DEFINE_RES_IRQ(gic_spi(15)), /* IRQ15 */
+	DEFINE_RES_IRQ(gic_spi(16)), /* IRQ16 */
+	DEFINE_RES_IRQ(gic_spi(17)), /* IRQ17 */
+	DEFINE_RES_IRQ(gic_spi(18)), /* IRQ18 */
+	DEFINE_RES_IRQ(gic_spi(19)), /* IRQ19 */
+	DEFINE_RES_IRQ(gic_spi(20)), /* IRQ20 */
+	DEFINE_RES_IRQ(gic_spi(21)), /* IRQ21 */
+	DEFINE_RES_IRQ(gic_spi(22)), /* IRQ22 */
+	DEFINE_RES_IRQ(gic_spi(23)), /* IRQ23 */
+	DEFINE_RES_IRQ(gic_spi(24)), /* IRQ24 */
+	DEFINE_RES_IRQ(gic_spi(25)), /* IRQ25 */
+	DEFINE_RES_IRQ(gic_spi(26)), /* IRQ26 */
+	DEFINE_RES_IRQ(gic_spi(27)), /* IRQ27 */
+	DEFINE_RES_IRQ(gic_spi(28)), /* IRQ28 */
+	DEFINE_RES_IRQ(gic_spi(29)), /* IRQ29 */
+	DEFINE_RES_IRQ(gic_spi(30)), /* IRQ30 */
+	DEFINE_RES_IRQ(gic_spi(31)), /* IRQ31 */
+};
+
+static const struct renesas_irqc_config irqc1_data = {
+	.irq_base = irq_pin(32), /* IRQ32 -> IRQ57 */
+};
+
+static const struct resource irqc1_resources[] = {
+	DEFINE_RES_MEM(0xe61c0200, 0x200), /* IRQC Event Detector Block_1 */
+	DEFINE_RES_IRQ(gic_spi(32)), /* IRQ32 */
+	DEFINE_RES_IRQ(gic_spi(33)), /* IRQ33 */
+	DEFINE_RES_IRQ(gic_spi(34)), /* IRQ34 */
+	DEFINE_RES_IRQ(gic_spi(35)), /* IRQ35 */
+	DEFINE_RES_IRQ(gic_spi(36)), /* IRQ36 */
+	DEFINE_RES_IRQ(gic_spi(37)), /* IRQ37 */
+	DEFINE_RES_IRQ(gic_spi(38)), /* IRQ38 */
+	DEFINE_RES_IRQ(gic_spi(39)), /* IRQ39 */
+	DEFINE_RES_IRQ(gic_spi(40)), /* IRQ40 */
+	DEFINE_RES_IRQ(gic_spi(41)), /* IRQ41 */
+	DEFINE_RES_IRQ(gic_spi(42)), /* IRQ42 */
+	DEFINE_RES_IRQ(gic_spi(43)), /* IRQ43 */
+	DEFINE_RES_IRQ(gic_spi(44)), /* IRQ44 */
+	DEFINE_RES_IRQ(gic_spi(45)), /* IRQ45 */
+	DEFINE_RES_IRQ(gic_spi(46)), /* IRQ46 */
+	DEFINE_RES_IRQ(gic_spi(47)), /* IRQ47 */
+	DEFINE_RES_IRQ(gic_spi(48)), /* IRQ48 */
+	DEFINE_RES_IRQ(gic_spi(49)), /* IRQ49 */
+	DEFINE_RES_IRQ(gic_spi(50)), /* IRQ50 */
+	DEFINE_RES_IRQ(gic_spi(51)), /* IRQ51 */
+	DEFINE_RES_IRQ(gic_spi(52)), /* IRQ52 */
+	DEFINE_RES_IRQ(gic_spi(53)), /* IRQ53 */
+	DEFINE_RES_IRQ(gic_spi(54)), /* IRQ54 */
+	DEFINE_RES_IRQ(gic_spi(55)), /* IRQ55 */
+	DEFINE_RES_IRQ(gic_spi(56)), /* IRQ56 */
+	DEFINE_RES_IRQ(gic_spi(57)), /* IRQ57 */
+};
+
+#define r8a73a4_register_irqc(idx)					\
+	platform_device_register_resndata(&platform_bus, "renesas_irqc", \
+					  idx, irqc##idx##_resources,	\
+					  ARRAY_SIZE(irqc##idx##_resources), \
+					  &irqc##idx##_data,		\
+					  sizeof(struct renesas_irqc_config))
+
 void __init r8a73a4_add_standard_devices(void)
 {
 	r8a73a4_register_scif(SCIFA0);
@@ -71,6 +153,8 @@ void __init r8a73a4_add_standard_devices(void)
 	r8a73a4_register_scif(SCIFB1);
 	r8a73a4_register_scif(SCIFB2);
 	r8a73a4_register_scif(SCIFB3);
+	r8a73a4_register_irqc(0);
+	r8a73a4_register_irqc(1);
 }
 
 #ifdef CONFIG_USE_OF
-- 
1.7.10.4

[PATCH 04/30] ARM: shmobile: r8a73a4 PFC support

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Add a platform device for the r8a73a4 PFC.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig                |    1 +
 arch/arm/mach-shmobile/include/mach/r8a73a4.h |    1 +
 arch/arm/mach-shmobile/setup-r8a73a4.c        |   10 ++++++++++
 3 files changed, 12 insertions(+)

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 17a59cd..0e4a820 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -20,6 +20,7 @@ config ARCH_SH73A0
 
 config ARCH_R8A73A4
 	bool "R-Mobile APE6 (R8A73A40)"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
 	select ARM_ARCH_TIMER
diff --git a/arch/arm/mach-shmobile/include/mach/r8a73a4.h b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
index 6db3495..f043103 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a73a4.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
@@ -3,5 +3,6 @@
 
 void r8a73a4_add_standard_devices(void);
 void r8a73a4_clock_init(void);
+void r8a73a4_pinmux_init(void);
 
 #endif /* __ASM_R8A73A4_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index da5ae16..c2d86f3 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -28,6 +28,16 @@
 #include <mach/r8a73a4.h>
 #include <asm/mach/arch.h>
 
+static const struct resource pfc_resources[] = {
+	DEFINE_RES_MEM(0xe6050000, 0x9000),
+};
+
+void __init r8a73a4_pinmux_init(void)
+{
+	platform_device_register_simple("pfc-r8a73a4", -1, pfc_resources,
+					ARRAY_SIZE(pfc_resources));
+}
+
 #define SCIF_COMMON(scif_type, baseaddr, irq)			\
 	.type		= scif_type,				\
 	.mapbase	= baseaddr,				\
-- 
1.7.10.4

[PATCH 05/30] ARM: shmobile: sh73a0: wait for completion when kicking the clock

[Simon Horman]

From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

To reconfigure clocks, controlled by FRQCRA and FRQCRB, a kick bit has to
be set and to make sure the setting has taken effect, it has to be read
back repeatedly until it is cleared by the hardware. This patch adds the
waiting part, that was missing until now.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Magnus Damm <damm at opensource.se
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-sh73a0.c |   23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 71843dd..34b5c5a 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -21,6 +21,7 @@
 #include <linux/io.h>
 #include <linux/sh_clk.h>
 #include <linux/clkdev.h>
+#include <asm/processor.h>
 #include <mach/common.h>
 
 #define FRQCRA		IOMEM(0xe6150000)
@@ -234,14 +235,24 @@ static struct clk *main_clks[] = {
 	&sh73a0_extalr_clk,
 };
 
-static void div4_kick(struct clk *clk)
+static int frqcr_kick(void)
 {
-	unsigned long value;
+	int i;
+
+	/* set KICK bit in FRQCRB to update hardware setting, check success */
+	__raw_writel(__raw_readl(FRQCRB) | (1 << 31), FRQCRB);
+	for (i = 1000; i; i--)
+		if (__raw_readl(FRQCRB) & (1 << 31))
+			cpu_relax();
+		else
+			return i;
+
+	return -ETIMEDOUT;
+}
 
-	/* set KICK bit in FRQCRB to update hardware setting */
-	value = __raw_readl(FRQCRB);
-	value |= (1 << 31);
-	__raw_writel(value, FRQCRB);
+static void div4_kick(struct clk *clk)
+{
+	frqcr_kick();
 }
 
 static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
-- 
1.7.10.4

[PATCH 06/30] ARM: shmobile: add R8A7778 basis support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Add initial support for the R8A7778 R-Car M1A SoC.
No static virtual mappings are used, all the components
make use of ioremap().
DT_MACHINE_START is still wrapped
in CONFIG_USE_OF to match other mach-shmobile code.

It is based on v1.0 datasheet

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7778.dtsi                |   35 ++++++
 arch/arm/mach-shmobile/Kconfig                |    6 +
 arch/arm/mach-shmobile/Makefile               |    1 +
 arch/arm/mach-shmobile/clock-r8a7778.c        |   91 ++++++++++++++
 arch/arm/mach-shmobile/include/mach/r8a7778.h |   28 +++++
 arch/arm/mach-shmobile/setup-r8a7778.c        |  167 +++++++++++++++++++++++++
 6 files changed, 328 insertions(+)
 create mode 100644 arch/arm/boot/dts/r8a7778.dtsi
 create mode 100644 arch/arm/mach-shmobile/clock-r8a7778.c
 create mode 100644 arch/arm/mach-shmobile/include/mach/r8a7778.h
 create mode 100644 arch/arm/mach-shmobile/setup-r8a7778.c

diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
new file mode 100644
index 0000000..4743735
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -0,0 +1,35 @@
+/*
+ * Device Tree Source for Renesas r8a7778
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * based on r8a7779
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Simon Horman
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "renesas,r8a7778";
+
+	cpus {
+		cpu at 0 {
+			compatible = "arm,cortex-a9";
+		};
+	};
+
+	gic: interrupt-controller at fe438000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xfe438000 0x1000>,
+		      <0xfe430000 0x100>;
+	};
+};
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 0e4a820..49cba4a 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -33,6 +33,12 @@ config ARCH_R8A7740
 	select CPU_V7
 	select SH_CLK_CPG
 
+config ARCH_R8A7778
+	bool "R-Car M1 (R8A77780)"
+	select CPU_V7
+	select SH_CLK_CPG
+	select ARM_GIC
+
 config ARCH_R8A7779
 	bool "R-Car H1 (R8A77790)"
 	select ARCH_WANT_OPTIONAL_GPIOLIB
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index c5a43ef..2d42de4 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_ARCH_SH7372)	+= setup-sh7372.o clock-sh7372.o intc-sh7372.o
 obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o
 obj-$(CONFIG_ARCH_R8A73A4)	+= setup-r8a73a4.o clock-r8a73a4.o
 obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o
+obj-$(CONFIG_ARCH_R8A7778)	+= setup-r8a7778.o clock-r8a7778.o
 obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o
 obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o clock-emev2.o
 
diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
new file mode 100644
index 0000000..387e3b7
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -0,0 +1,91 @@
+/*
+ * r8a7778 clock framework support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * based on r8a7779
+ *
+ * Copyright (C) 2011  Renesas Solutions Corp.
+ * Copyright (C) 2011  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <linux/clkdev.h>
+#include <mach/common.h>
+
+#define MSTPCR0		IOMEM(0xffc80030)
+#define MSTPCR1		IOMEM(0xffc80034)
+#define MSTPCR3		IOMEM(0xffc8003c)
+#define MSTPSR1		IOMEM(0xffc80044)
+#define MSTPSR4		IOMEM(0xffc80048)
+#define MSTPSR6		IOMEM(0xffc8004c)
+#define MSTPCR4		IOMEM(0xffc80050)
+#define MSTPCR5		IOMEM(0xffc80054)
+#define MSTPCR6		IOMEM(0xffc80058)
+
+/* ioremap() through clock mapping mandatory to avoid
+ * collision with ARM coherent DMA virtual memory range.
+ */
+
+static struct clk_mapping cpg_mapping = {
+	.phys	= 0xffc80000,
+	.len	= 0x80,
+};
+
+static struct clk clkp = {
+	.rate   = 62500000, /* FIXME: shortcut */
+	.flags  = CLK_ENABLE_ON_INIT,
+	.mapping = &cpg_mapping,
+};
+
+static struct clk *main_clks[] = {
+	&clkp,
+};
+
+enum {
+	MSTP016, MSTP015,
+	MSTP_NR };
+
+static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP016] = SH_CLK_MSTP32(&clkp, MSTPCR0, 16, 0), /* TMU0 */
+	[MSTP015] = SH_CLK_MSTP32(&clkp, MSTPCR0, 15, 0), /* TMU1 */
+};
+
+static struct clk_lookup lookups[] = {
+	/* MSTP32 clocks */
+	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
+	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP015]), /* TMU01 */
+};
+
+void __init r8a7778_clock_init(void)
+{
+	int k, ret = 0;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		shmobile_clk_init();
+	else
+		panic("failed to setup r8a7778 clocks\n");
+}
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h
new file mode 100644
index 0000000..a755dca
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#ifndef __ASM_R8A7778_H__
+#define __ASM_R8A7778_H__
+
+extern void r8a7778_add_standard_devices(void);
+extern void r8a7778_add_standard_devices_dt(void);
+extern void r8a7778_init_delay(void);
+extern void r8a7778_init_irq(void);
+extern void r8a7778_init_irq_dt(void);
+extern void r8a7778_clock_init(void);
+
+#endif /* __ASM_R8A7778_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
new file mode 100644
index 0000000..811ccf3
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -0,0 +1,167 @@
+/*
+ * r8a7778 processor support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/irqchip.h>
+#include <linux/sh_timer.h>
+#include <mach/irqs.h>
+#include <mach/r8a7778.h>
+#include <mach/common.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/cache-l2x0.h>
+
+/* TMU */
+static struct resource sh_tmu0_resources[] = {
+	DEFINE_RES_MEM(0xffd80008, 12),
+	DEFINE_RES_IRQ(gic_iid(0x40)),
+};
+
+static struct sh_timer_config sh_tmu0_platform_data = {
+	.name			= "TMU00",
+	.channel_offset		= 0x4,
+	.timer_bit		= 0,
+	.clockevent_rating	= 200,
+};
+
+static struct resource sh_tmu1_resources[] = {
+	DEFINE_RES_MEM(0xffd80014, 12),
+	DEFINE_RES_IRQ(gic_iid(0x41)),
+};
+
+static struct sh_timer_config sh_tmu1_platform_data = {
+	.name			= "TMU01",
+	.channel_offset		= 0x10,
+	.timer_bit		= 1,
+	.clocksource_rating	= 200,
+};
+
+#define PLATFORM_INFO(n, i)					\
+{								\
+	.parent		= &platform_bus,			\
+	.name		= #n,					\
+	.id		= i,					\
+	.res		= n ## i ## _resources,			\
+	.num_res	= ARRAY_SIZE(n ## i ##_resources),	\
+	.data		= &n ## i ##_platform_data,		\
+	.size_data	= sizeof(n ## i ## _platform_data),	\
+}
+
+struct platform_device_info platform_devinfo[] = {
+	PLATFORM_INFO(sh_tmu, 0),
+	PLATFORM_INFO(sh_tmu, 1),
+};
+
+void __init r8a7778_add_standard_devices(void)
+{
+	int i;
+
+#ifdef CONFIG_CACHE_L2X0
+	void __iomem *base = ioremap_nocache(0xf0100000, 0x1000);
+	if (base) {
+		/*
+		 * Early BRESP enable, Shared attribute override enable, 64K*16way
+		 * don't call iounmap(base)
+		 */
+		l2x0_init(base, 0x40470000, 0x82000fff);
+	}
+#endif
+
+	for (i = 0; i < ARRAY_SIZE(platform_devinfo); i++)
+		platform_device_register_full(&platform_devinfo[i]);
+}
+
+#define INT2SMSKCR0	0x82288 /* 0xfe782288 */
+#define INT2SMSKCR1	0x8228c /* 0xfe78228c */
+
+#define INT2NTSR0	0x00018 /* 0xfe700018 */
+#define INT2NTSR1	0x0002c /* 0xfe70002c */
+static void __init r8a7778_init_irq_common(void)
+{
+	void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000);
+
+	BUG_ON(!base);
+
+	/* route all interrupts to ARM */
+	__raw_writel(0x73ffffff, base + INT2NTSR0);
+	__raw_writel(0xffffffff, base + INT2NTSR1);
+
+	/* unmask all known interrupts in INTCS2 */
+	__raw_writel(0x08330773, base + INT2SMSKCR0);
+	__raw_writel(0x00311110, base + INT2SMSKCR1);
+
+	iounmap(base);
+}
+
+void __init r8a7778_init_irq(void)
+{
+	void __iomem *gic_dist_base;
+	void __iomem *gic_cpu_base;
+
+	gic_dist_base = ioremap_nocache(0xfe438000, PAGE_SIZE);
+	gic_cpu_base  = ioremap_nocache(0xfe430000, PAGE_SIZE);
+	BUG_ON(!gic_dist_base || !gic_cpu_base);
+
+	/* use GIC to handle interrupts */
+	gic_init(0, 29, gic_dist_base, gic_cpu_base);
+
+	r8a7778_init_irq_common();
+}
+
+void __init r8a7778_init_delay(void)
+{
+	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
+}
+
+#ifdef CONFIG_USE_OF
+void __init r8a7778_init_irq_dt(void)
+{
+	irqchip_init();
+	r8a7778_init_irq_common();
+}
+
+static const struct of_dev_auxdata r8a7778_auxdata_lookup[] __initconst = {
+	{},
+};
+
+void __init r8a7778_add_standard_devices_dt(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     r8a7778_auxdata_lookup, NULL);
+}
+
+static const char *r8a7778_compat_dt[] __initdata = {
+	"renesas,r8a7778",
+	NULL,
+};
+
+DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)")
+	.init_early	= r8a7778_init_delay,
+	.init_irq	= r8a7778_init_irq_dt,
+	.init_machine	= r8a7778_add_standard_devices_dt,
+	.init_time	= shmobile_timer_init,
+	.dt_compat	= r8a7778_compat_dt,
+MACHINE_END
+
+#endif /* CONFIG_USE_OF */
-- 
1.7.10.4

[PATCH 07/30] ARM: shmobile: r8a7778 SCIF support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Add SCIF serial port support to the r8a7778 SoC by
adding platform devices together with clock bindings.
DT device description is excluded at this point since
such bindings are still under development.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7778.c |   13 +++++++++++++
 arch/arm/mach-shmobile/setup-r8a7778.c |   26 ++++++++++++++++++++++++++
 2 files changed, 39 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index 387e3b7..f1277f4 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -58,16 +58,29 @@ static struct clk *main_clks[] = {
 };
 
 enum {
+	MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
 	MSTP016, MSTP015,
 	MSTP_NR };
 
 static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP026] = SH_CLK_MSTP32(&clkp, MSTPCR0, 26, 0), /* SCIF0 */
+	[MSTP025] = SH_CLK_MSTP32(&clkp, MSTPCR0, 25, 0), /* SCIF1 */
+	[MSTP024] = SH_CLK_MSTP32(&clkp, MSTPCR0, 24, 0), /* SCIF2 */
+	[MSTP023] = SH_CLK_MSTP32(&clkp, MSTPCR0, 23, 0), /* SCIF3 */
+	[MSTP022] = SH_CLK_MSTP32(&clkp, MSTPCR0, 22, 0), /* SCIF4 */
+	[MSTP021] = SH_CLK_MSTP32(&clkp, MSTPCR0, 21, 0), /* SCIF5 */
 	[MSTP016] = SH_CLK_MSTP32(&clkp, MSTPCR0, 16, 0), /* TMU0 */
 	[MSTP015] = SH_CLK_MSTP32(&clkp, MSTPCR0, 15, 0), /* TMU1 */
 };
 
 static struct clk_lookup lookups[] = {
 	/* MSTP32 clocks */
+	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
+	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
+	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
+	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
+	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
+	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
 	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
 	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP015]), /* TMU01 */
 };
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 811ccf3..01c62be 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -25,6 +25,7 @@
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/irqchip.h>
+#include <linux/serial_sci.h>
 #include <linux/sh_timer.h>
 #include <mach/irqs.h>
 #include <mach/r8a7778.h>
@@ -32,6 +33,26 @@
 #include <asm/mach/arch.h>
 #include <asm/hardware/cache-l2x0.h>
 
+/* SCIF */
+#define SCIF_INFO(baseaddr, irq)				\
+{								\
+	.mapbase	= baseaddr,				\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
+	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
+	.scbrr_algo_id	= SCBRR_ALGO_2,				\
+	.type		= PORT_SCIF,				\
+	.irqs		= SCIx_IRQ_MUXED(irq),			\
+}
+
+static struct plat_sci_port scif_platform_data[] = {
+	SCIF_INFO(0xffe40000, gic_iid(0x66)),
+	SCIF_INFO(0xffe41000, gic_iid(0x67)),
+	SCIF_INFO(0xffe42000, gic_iid(0x68)),
+	SCIF_INFO(0xffe43000, gic_iid(0x69)),
+	SCIF_INFO(0xffe44000, gic_iid(0x6a)),
+	SCIF_INFO(0xffe45000, gic_iid(0x6b)),
+};
+
 /* TMU */
 static struct resource sh_tmu0_resources[] = {
 	DEFINE_RES_MEM(0xffd80008, 12),
@@ -88,6 +109,11 @@ void __init r8a7778_add_standard_devices(void)
 	}
 #endif
 
+	for (i = 0; i < ARRAY_SIZE(scif_platform_data); i++)
+		platform_device_register_data(&platform_bus, "sh-sci", i,
+					      &scif_platform_data[i],
+					      sizeof(struct plat_sci_port));
+
 	for (i = 0; i < ARRAY_SIZE(platform_devinfo); i++)
 		platform_device_register_full(&platform_devinfo[i]);
 }
-- 
1.7.10.4

[PATCH 08/30] ARM: shmobile: sh73a0: add irqpin DT nodes

[Simon Horman]

From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

Add DT nodes for the 4 irqpin interrupt controllers on sh73a0. We add them
to sh73a0.dtsi, which is also used by configurations, doing all their
device instantiation from board the .c code. We rely on the fact, that
such configurations don't instantiate devices from the device-tree.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0.dtsi |   81 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 81 insertions(+)

diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 8a59465..7e71e3a 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -38,6 +38,87 @@
 		      <0xf0000100 0x100>;
 	};
 
+	irqpin0: irqpin at e6900000 {
+		compatible = "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe6900000 4>,
+			<0xe6900010 4>,
+			<0xe6900020 1>,
+			<0xe6900040 1>,
+			<0xe6900060 1>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 1 0x4
+			      0 2 0x4
+			      0 3 0x4
+			      0 4 0x4
+			      0 5 0x4
+			      0 6 0x4
+			      0 7 0x4
+			      0 8 0x4>;
+	};
+
+	irqpin1: irqpin at e6900004 {
+		compatible = "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe6900004 4>,
+			<0xe6900014 4>,
+			<0xe6900024 1>,
+			<0xe6900044 1>,
+			<0xe6900064 1>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 9 0x4
+			      0 10 0x4
+			      0 11 0x4
+			      0 12 0x4
+			      0 13 0x4
+			      0 14 0x4
+			      0 15 0x4
+			      0 16 0x4>;
+		control-parent;
+	};
+
+	irqpin2: irqpin at e6900008 {
+		compatible = "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe6900008 4>,
+			<0xe6900018 4>,
+			<0xe6900028 1>,
+			<0xe6900048 1>,
+			<0xe6900068 1>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 17 0x4
+			      0 18 0x4
+			      0 19 0x4
+			      0 20 0x4
+			      0 21 0x4
+			      0 22 0x4
+			      0 23 0x4
+			      0 24 0x4>;
+	};
+
+	irqpin3: irqpin at e690000c {
+		compatible = "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe690000c 4>,
+			<0xe690001c 4>,
+			<0xe690002c 1>,
+			<0xe690004c 1>,
+			<0xe690006c 1>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 25 0x4
+			      0 26 0x4
+			      0 27 0x4
+			      0 28 0x4
+			      0 29 0x4
+			      0 30 0x4
+			      0 31 0x4
+			      0 32 0x4>;
+	};
+
 	i2c0: i2c at 0xe6820000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
1.7.10.4

[PATCH 09/30] ARM: shmobile: Disallow PINCTRL without GPIOLIB

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Modify mach-shmobile to only select PINCTRL in case of
ARCH_WANT_OPTIONAL_GPIOLIB is set.

This fixes a build error triggered when adding a new SoC
lacking GPIO software support (ARCH_WANT_OPTIONAL_GPIOLIB=n):

 CC      drivers/tty/vt/keyboard.o
In file included from drivers/pinctrl/core.c:30:0:
include/asm-generic/gpio.h: In function 'gpio_get_value_cansleep':
include/asm-generic/gpio.h:270:2: error: implicit declaration of function '__gpio_get_value'
include/asm-generic/gpio.h: In function 'gpio_set_value_cansleep':
include/asm-generic/gpio.h:276:2: error: implicit declaration of function '__gpio_set_value'
drivers/pinctrl/core.c: In function 'pinctrl_ready_for_gpio_range':
drivers/pinctrl/core.c:297:9: error: implicit declaration of function 'gpio_to_chip'
drivers/pinctrl/core.c:297:27: warning: initialization makes pointer from integer without a cast
drivers/pinctrl/core.c:304:45: error: dereferencing pointer to incomplete type
drivers/pinctrl/core.c:305:26: error: dereferencing pointer to incomplete type
drivers/pinctrl/core.c:305:39: error: dereferencing pointer to incomplete type
make[2]: *** [drivers/pinctrl/core.o] Error 1
make[1]: *** [drivers/pinctrl] Error 2
make[1]: *** Waiting for unfinished jobs....
  LD      drivers/sh/built-in.o

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5b71469..b63902e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -725,7 +725,7 @@ config ARCH_SHMOBILE
 	select MULTI_IRQ_HANDLER
 	select NEED_MACH_MEMORY_H
 	select NO_IOPORT
-	select PINCTRL
+	select PINCTRL if ARCH_WANT_OPTIONAL_GPIOLIB
 	select PM_GENERIC_DOMAINS if PM
 	select SPARSE_IRQ
 	help
-- 
1.7.10.4

[PATCH 10/30] ARM: shmobile: r8a73a4: add thermal driver support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

You can get current thermal by
> cat /sys/class/thermal/thermal_zone?/temp

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a73a4.dtsi         |    7 +++++++
 arch/arm/mach-shmobile/clock-r8a73a4.c |   13 ++++++++++++-
 arch/arm/mach-shmobile/setup-r8a73a4.c |   15 +++++++++++++++
 3 files changed, 34 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 4c68ba1..7db5b50 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -84,4 +84,11 @@
 				<0 56 4>, <0 57 4>;
 	};
 
+	thermal at e61f0000 {
+		compatible = "renesas,rcar-thermal";
+		reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>,
+			 <0xe61f0200 0x38>, <0xe61f0300 0x38>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 69 4>;
+	};
 };
diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index 037713b..e710c00 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -29,6 +29,7 @@
 
 #define MPCKCR 0xe6150080
 #define SMSTPCR2 0xe6150138
+#define SMSTPCR5 0xe6150144
 
 static struct clk_mapping cpg_mapping = {
 	.phys   = CPG_BASE,
@@ -56,7 +57,12 @@ static struct clk *main_clks[] = {
 	&extal2_clk,
 };
 
-enum { MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP_NR };
+enum {
+	MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203,
+	MSTP522,
+	MSTP_NR
+};
+
 static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP204] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
 	[MSTP203] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
@@ -64,6 +70,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP207] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
 	[MSTP216] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
 	[MSTP217] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 17, 0), /* SCIFB3 */
+	[MSTP522] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR5, 22, 0), /* Thermal */
 };
 
 static struct clk_lookup lookups[] = {
@@ -73,6 +80,10 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
 	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
 	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]),
+	CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
+
+	/* for DT */
+	CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
 };
 
 void __init r8a73a4_clock_init(void)
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index c2d86f3..c5a75a7 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -155,6 +155,20 @@ static const struct resource irqc1_resources[] = {
 					  &irqc##idx##_data,		\
 					  sizeof(struct renesas_irqc_config))
 
+/* Thermal0 -> Thermal2 */
+static const struct resource thermal0_resources[] = {
+	DEFINE_RES_MEM(0xe61f0000, 0x14),
+	DEFINE_RES_MEM(0xe61f0100, 0x38),
+	DEFINE_RES_MEM(0xe61f0200, 0x38),
+	DEFINE_RES_MEM(0xe61f0300, 0x38),
+	DEFINE_RES_IRQ(gic_spi(69)),
+};
+
+#define r8a73a4_register_thermal()					\
+	platform_device_register_simple("rcar_thermal", -1,		\
+					thermal0_resources,		\
+					ARRAY_SIZE(thermal0_resources))
+
 void __init r8a73a4_add_standard_devices(void)
 {
 	r8a73a4_register_scif(SCIFA0);
@@ -165,6 +179,7 @@ void __init r8a73a4_add_standard_devices(void)
 	r8a73a4_register_scif(SCIFB3);
 	r8a73a4_register_irqc(0);
 	r8a73a4_register_irqc(1);
+	r8a73a4_register_thermal();
 }
 
 #ifdef CONFIG_USE_OF
-- 
1.7.10.4

[PATCH 11/30] ARM: shmobile: r8a7740: Migrate from INTC to GIC

[Simon Horman]

From: Bastian Hecht <hechtb@gmail.com>

With the added capabilty of the intc_irqpin driver to handle shared
external IRQs, all prerequisites are fulfilled and we are ready to
migrate completely to GIC. This includes the following steps:

- Kconfig:	select ARM_GIC and RENESAS_INTC_IRQPIN
- intc-r8a7740: Throw out all legacy INTC code and init the GIC. We need
  		to mask out all shared IRQs as it is needed by the
		shared intc_irqpin driver.
- setup-r8a7740: Add 4 irqpin devices to handle external IRQs and update
		all IRQ numbers to point to the GIC SPI.
- board-armadillo: Update all IRQ numbers to point to the GIC SPI.
- pfc-r8a7740:	Update all IRQ numbers of the GPIOs to point to the GIC
		SPI.

Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig                 |    2 +
 arch/arm/mach-shmobile/board-armadillo800eva.c |   35 +-
 arch/arm/mach-shmobile/intc-r8a7740.c          |  641 ++----------------------
 arch/arm/mach-shmobile/setup-r8a7740.c         |  192 +++++--
 drivers/pinctrl/sh-pfc/pfc-r8a7740.c           |   64 +--
 5 files changed, 239 insertions(+), 695 deletions(-)

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 49cba4a..d569c34 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -30,8 +30,10 @@ config ARCH_R8A73A4
 config ARCH_R8A7740
 	bool "R-Mobile A1 (R8A77400)"
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARM_GIC
 	select CPU_V7
 	select SH_CLK_CPG
+	select RENESAS_INTC_IRQPIN
 
 config ARCH_R8A7778
 	bool "R-Car M1 (R8A77780)"
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index f2ec077..e451327 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -145,7 +145,7 @@
  * see
  *	usbhsf_power_ctrl()
  */
-#define IRQ7		evt2irq(0x02e0)
+#define IRQ7		irq_pin(7)
 #define USBCR1		IOMEM(0xe605810a)
 #define USBH		0xC6700000
 #define USBH_USBCTR	0x10834
@@ -330,7 +330,7 @@ static struct resource usbhsf_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= evt2irq(0x0A20),
+		.start	= gic_spi(51),
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -363,7 +363,7 @@ static struct resource sh_eth_resources[] = {
 		.end	= 0xe9a02000 - 1,
 		.flags	= IORESOURCE_MEM,
 	}, {
-		.start	= evt2irq(0x0500),
+		.start	= gic_spi(110),
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -417,7 +417,7 @@ static struct resource lcdc0_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= intcs_evt2irq(0x580),
+		.start	= gic_spi(177),
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -452,7 +452,7 @@ static struct resource hdmi_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= evt2irq(0x1700),
+		.start	= gic_spi(131),
 		.flags	= IORESOURCE_IRQ,
 	},
 	[2] = {
@@ -514,7 +514,7 @@ static struct resource hdmi_lcdc_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= intcs_evt2irq(0x1780),
+		.start	= gic_spi(178),
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -574,7 +574,7 @@ static struct regulator_consumer_supply fixed3v3_power_consumers[] =
  * We can use IRQ31 as card detect irq,
  * but it needs chattering removal operation
  */
-#define IRQ31	evt2irq(0x33E0)
+#define IRQ31	irq_pin(31)
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
@@ -596,12 +596,12 @@ static struct resource sdhi0_resources[] = {
 	 */
 	{
 		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= evt2irq(0x0E20),
+		.start	= gic_spi(118),
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
 		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= evt2irq(0x0E40),
+		.start	= gic_spi(119),
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -633,15 +633,15 @@ static struct resource sdhi1_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= evt2irq(0x0E80),
+		.start	= gic_spi(121),
 		.flags	= IORESOURCE_IRQ,
 	},
 	[2] = {
-		.start	= evt2irq(0x0EA0),
+		.start	= gic_spi(122),
 		.flags	= IORESOURCE_IRQ,
 	},
 	[3] = {
-		.start	= evt2irq(0x0EC0),
+		.start	= gic_spi(123),
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -674,12 +674,12 @@ static struct resource sh_mmcif_resources[] = {
 	},
 	[1] = {
 		/* MMC ERR */
-		.start	= evt2irq(0x1AC0),
+		.start	= gic_spi(56),
 		.flags	= IORESOURCE_IRQ,
 	},
 	[2] = {
 		/* MMC NOR */
-		.start	= evt2irq(0x1AE0),
+		.start	= gic_spi(57),
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -756,7 +756,7 @@ static struct resource ceu0_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = intcs_evt2irq(0x0500),
+		.start  = gic_spi(160),
 		.flags  = IORESOURCE_IRQ,
 	},
 	[2] = {
@@ -798,7 +798,7 @@ static struct resource fsi_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = evt2irq(0x1840),
+		.start  = gic_spi(9),
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -881,7 +881,7 @@ static struct platform_device i2c_gpio_device = {
 static struct i2c_board_info i2c0_devices[] = {
 	{
 		I2C_BOARD_INFO("st1232-ts", 0x55),
-		.irq = evt2irq(0x0340),
+		.irq = irq_pin(10),
 	},
 	{
 		I2C_BOARD_INFO("wm8978", 0x1a),
@@ -1207,7 +1207,6 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
 	.map_io		= r8a7740_map_io,
 	.init_early	= eva_add_early_devices,
 	.init_irq	= r8a7740_init_irq,
-	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= eva_init,
 	.init_late	= shmobile_init_late,
 	.init_time	= eva_earlytimer_init,
diff --git a/arch/arm/mach-shmobile/intc-r8a7740.c b/arch/arm/mach-shmobile/intc-r8a7740.c
index 9a69a31..b741c84 100644
--- a/arch/arm/mach-shmobile/intc-r8a7740.c
+++ b/arch/arm/mach-shmobile/intc-r8a7740.c
@@ -18,620 +18,39 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/io.h>
-#include <linux/sh_intc.h>
-#include <mach/intc.h>
-#include <mach/irqs.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-/*
- *		INTCA
- */
-enum {
-	UNUSED_INTCA = 0,
-
-	/* interrupt sources INTCA */
-	DIRC,
-	ATAPI,
-	IIC1_ALI, IIC1_TACKI, IIC1_WAITI, IIC1_DTEI,
-	AP_ARM_COMMTX, AP_ARM_COMMRX,
-	MFI, MFIS,
-	BBIF1, BBIF2,
-	USBHSDMAC,
-	USBF_OUL_SOF, USBF_IXL_INT,
-	SGX540,
-	CMT1_0, CMT1_1, CMT1_2, CMT1_3,
-	CMT2,
-	CMT3,
-	KEYSC,
-	SCIFA0, SCIFA1, SCIFA2, SCIFA3,
-	MSIOF2, MSIOF1,
-	SCIFA4, SCIFA5, SCIFB,
-	FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
-	SDHI0_0, SDHI0_1, SDHI0_2, SDHI0_3,
-	SDHI1_0, SDHI1_1, SDHI1_2, SDHI1_3,
-	AP_ARM_L2CINT,
-	IRDA,
-	TPU0,
-	SCIFA6, SCIFA7,
-	GbEther,
-	ICBS0,
-	DDM,
-	SDHI2_0, SDHI2_1, SDHI2_2, SDHI2_3,
-	RWDT0,
-	DMAC1_1_DEI0, DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3,
-	DMAC1_2_DEI4, DMAC1_2_DEI5, DMAC1_2_DADERR,
-	DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3,
-	DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR,
-	DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
-	DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
-	SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM,
-	HDMI,
-	USBH_INT, USBH_OHCI, USBH_EHCI, USBH_PME, USBH_BIND,
-	RSPI_OVRF, RSPI_SPTEF, RSPI_SPRF,
-	SPU2_0, SPU2_1,
-	FSI, FMSI,
-	HDMI_SSS, HDMI_KEY,
-	IPMMU,
-	AP_ARM_CTIIRQ, AP_ARM_PMURQ,
-	MFIS2,
-	CPORTR2S,
-	CMT14, CMT15,
-	MMCIF_0, MMCIF_1, MMCIF_2,
-	SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI,
-	STPRO_0, STPRO_1, STPRO_2, STPRO_3, STPRO_4,
-
-	/* interrupt groups INTCA */
-	DMAC1_1, DMAC1_2,
-	DMAC2_1, DMAC2_2,
-	DMAC3_1, DMAC3_2,
-	AP_ARM1, AP_ARM2,
-	SDHI0, SDHI1, SDHI2,
-	SHWYSTAT,
-	USBF, USBH1, USBH2,
-	RSPI, SPU2, FLCTL, IIC1,
-};
-
-static struct intc_vect intca_vectors[] __initdata = {
-	INTC_VECT(DIRC,			0x0560),
-	INTC_VECT(ATAPI,		0x05E0),
-	INTC_VECT(IIC1_ALI,		0x0780),
-	INTC_VECT(IIC1_TACKI,		0x07A0),
-	INTC_VECT(IIC1_WAITI,		0x07C0),
-	INTC_VECT(IIC1_DTEI,		0x07E0),
-	INTC_VECT(AP_ARM_COMMTX,	0x0840),
-	INTC_VECT(AP_ARM_COMMRX,	0x0860),
-	INTC_VECT(MFI,			0x0900),
-	INTC_VECT(MFIS,			0x0920),
-	INTC_VECT(BBIF1,		0x0940),
-	INTC_VECT(BBIF2,		0x0960),
-	INTC_VECT(USBHSDMAC,		0x0A00),
-	INTC_VECT(USBF_OUL_SOF,		0x0A20),
-	INTC_VECT(USBF_IXL_INT,		0x0A40),
-	INTC_VECT(SGX540,		0x0A60),
-	INTC_VECT(CMT1_0,		0x0B00),
-	INTC_VECT(CMT1_1,		0x0B20),
-	INTC_VECT(CMT1_2,		0x0B40),
-	INTC_VECT(CMT1_3,		0x0B60),
-	INTC_VECT(CMT2,			0x0B80),
-	INTC_VECT(CMT3,			0x0BA0),
-	INTC_VECT(KEYSC,		0x0BE0),
-	INTC_VECT(SCIFA0,		0x0C00),
-	INTC_VECT(SCIFA1,		0x0C20),
-	INTC_VECT(SCIFA2,		0x0C40),
-	INTC_VECT(SCIFA3,		0x0C60),
-	INTC_VECT(MSIOF2,		0x0C80),
-	INTC_VECT(MSIOF1,		0x0D00),
-	INTC_VECT(SCIFA4,		0x0D20),
-	INTC_VECT(SCIFA5,		0x0D40),
-	INTC_VECT(SCIFB,		0x0D60),
-	INTC_VECT(FLCTL_FLSTEI,		0x0D80),
-	INTC_VECT(FLCTL_FLTENDI,	0x0DA0),
-	INTC_VECT(FLCTL_FLTREQ0I,	0x0DC0),
-	INTC_VECT(FLCTL_FLTREQ1I,	0x0DE0),
-	INTC_VECT(SDHI0_0,		0x0E00),
-	INTC_VECT(SDHI0_1,		0x0E20),
-	INTC_VECT(SDHI0_2,		0x0E40),
-	INTC_VECT(SDHI0_3,		0x0E60),
-	INTC_VECT(SDHI1_0,		0x0E80),
-	INTC_VECT(SDHI1_1,		0x0EA0),
-	INTC_VECT(SDHI1_2,		0x0EC0),
-	INTC_VECT(SDHI1_3,		0x0EE0),
-	INTC_VECT(AP_ARM_L2CINT,	0x0FA0),
-	INTC_VECT(IRDA,			0x0480),
-	INTC_VECT(TPU0,			0x04A0),
-	INTC_VECT(SCIFA6,		0x04C0),
-	INTC_VECT(SCIFA7,		0x04E0),
-	INTC_VECT(GbEther,		0x0500),
-	INTC_VECT(ICBS0,		0x0540),
-	INTC_VECT(DDM,			0x1140),
-	INTC_VECT(SDHI2_0,		0x1200),
-	INTC_VECT(SDHI2_1,		0x1220),
-	INTC_VECT(SDHI2_2,		0x1240),
-	INTC_VECT(SDHI2_3,		0x1260),
-	INTC_VECT(RWDT0,		0x1280),
-	INTC_VECT(DMAC1_1_DEI0,		0x2000),
-	INTC_VECT(DMAC1_1_DEI1,		0x2020),
-	INTC_VECT(DMAC1_1_DEI2,		0x2040),
-	INTC_VECT(DMAC1_1_DEI3,		0x2060),
-	INTC_VECT(DMAC1_2_DEI4,		0x2080),
-	INTC_VECT(DMAC1_2_DEI5,		0x20A0),
-	INTC_VECT(DMAC1_2_DADERR,	0x20C0),
-	INTC_VECT(DMAC2_1_DEI0,		0x2100),
-	INTC_VECT(DMAC2_1_DEI1,		0x2120),
-	INTC_VECT(DMAC2_1_DEI2,		0x2140),
-	INTC_VECT(DMAC2_1_DEI3,		0x2160),
-	INTC_VECT(DMAC2_2_DEI4,		0x2180),
-	INTC_VECT(DMAC2_2_DEI5,		0x21A0),
-	INTC_VECT(DMAC2_2_DADERR,	0x21C0),
-	INTC_VECT(DMAC3_1_DEI0,		0x2200),
-	INTC_VECT(DMAC3_1_DEI1,		0x2220),
-	INTC_VECT(DMAC3_1_DEI2,		0x2240),
-	INTC_VECT(DMAC3_1_DEI3,		0x2260),
-	INTC_VECT(DMAC3_2_DEI4,		0x2280),
-	INTC_VECT(DMAC3_2_DEI5,		0x22A0),
-	INTC_VECT(DMAC3_2_DADERR,	0x22C0),
-	INTC_VECT(SHWYSTAT_RT,		0x1300),
-	INTC_VECT(SHWYSTAT_HS,		0x1320),
-	INTC_VECT(SHWYSTAT_COM,		0x1340),
-	INTC_VECT(USBH_INT,		0x1540),
-	INTC_VECT(USBH_OHCI,		0x1560),
-	INTC_VECT(USBH_EHCI,		0x1580),
-	INTC_VECT(USBH_PME,		0x15A0),
-	INTC_VECT(USBH_BIND,		0x15C0),
-	INTC_VECT(HDMI,			0x1700),
-	INTC_VECT(RSPI_OVRF,		0x1780),
-	INTC_VECT(RSPI_SPTEF,		0x17A0),
-	INTC_VECT(RSPI_SPRF,		0x17C0),
-	INTC_VECT(SPU2_0,		0x1800),
-	INTC_VECT(SPU2_1,		0x1820),
-	INTC_VECT(FSI,			0x1840),
-	INTC_VECT(FMSI,			0x1860),
-	INTC_VECT(HDMI_SSS,		0x18A0),
-	INTC_VECT(HDMI_KEY,		0x18C0),
-	INTC_VECT(IPMMU,		0x1920),
-	INTC_VECT(AP_ARM_CTIIRQ,	0x1980),
-	INTC_VECT(AP_ARM_PMURQ,		0x19A0),
-	INTC_VECT(MFIS2,		0x1A00),
-	INTC_VECT(CPORTR2S,		0x1A20),
-	INTC_VECT(CMT14,		0x1A40),
-	INTC_VECT(CMT15,		0x1A60),
-	INTC_VECT(MMCIF_0,		0x1AA0),
-	INTC_VECT(MMCIF_1,		0x1AC0),
-	INTC_VECT(MMCIF_2,		0x1AE0),
-	INTC_VECT(SIM_ERI,		0x1C00),
-	INTC_VECT(SIM_RXI,		0x1C20),
-	INTC_VECT(SIM_TXI,		0x1C40),
-	INTC_VECT(SIM_TEI,		0x1C60),
-	INTC_VECT(STPRO_0,		0x1C80),
-	INTC_VECT(STPRO_1,		0x1CA0),
-	INTC_VECT(STPRO_2,		0x1CC0),
-	INTC_VECT(STPRO_3,		0x1CE0),
-	INTC_VECT(STPRO_4,		0x1D00),
-};
-
-static struct intc_group intca_groups[] __initdata = {
-	INTC_GROUP(DMAC1_1,
-		   DMAC1_1_DEI0, DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3),
-	INTC_GROUP(DMAC1_2,
-		   DMAC1_2_DEI4, DMAC1_2_DEI5, DMAC1_2_DADERR),
-	INTC_GROUP(DMAC2_1,
-		   DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3),
-	INTC_GROUP(DMAC2_2,
-		   DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR),
-	INTC_GROUP(DMAC3_1,
-		   DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3),
-	INTC_GROUP(DMAC3_2,
-		   DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR),
-	INTC_GROUP(AP_ARM1,
-		   AP_ARM_COMMTX, AP_ARM_COMMRX),
-	INTC_GROUP(AP_ARM2,
-		   AP_ARM_CTIIRQ, AP_ARM_PMURQ),
-	INTC_GROUP(USBF,
-		   USBF_OUL_SOF, USBF_IXL_INT),
-	INTC_GROUP(SDHI0,
-		   SDHI0_0, SDHI0_1, SDHI0_2, SDHI0_3),
-	INTC_GROUP(SDHI1,
-		   SDHI1_0, SDHI1_1, SDHI1_2, SDHI1_3),
-	INTC_GROUP(SDHI2,
-		   SDHI2_0, SDHI2_1, SDHI2_2, SDHI2_3),
-	INTC_GROUP(SHWYSTAT,
-		   SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM),
-	INTC_GROUP(USBH1, /* FIXME */
-		   USBH_INT, USBH_OHCI),
-	INTC_GROUP(USBH2, /* FIXME */
-		   USBH_EHCI,
-		   USBH_PME, USBH_BIND),
-	INTC_GROUP(RSPI,
-		   RSPI_OVRF, RSPI_SPTEF, RSPI_SPRF),
-	INTC_GROUP(SPU2,
-		   SPU2_0, SPU2_1),
-	INTC_GROUP(FLCTL,
-		   FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
-	INTC_GROUP(IIC1,
-		   IIC1_ALI, IIC1_TACKI, IIC1_WAITI, IIC1_DTEI),
-};
-
-static struct intc_mask_reg intca_mask_registers[] __initdata = {
-	{ /* IMR0A / IMCR0A */ 0xe6940080, 0xe69400c0, 8,
-	  { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
-	    0, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } },
-	{ /* IMR1A / IMCR1A */ 0xe6940084, 0xe69400c4, 8,
-	  { ATAPI, 0, DIRC, 0,
-	    DMAC1_1_DEI3, DMAC1_1_DEI2, DMAC1_1_DEI1, DMAC1_1_DEI0 } },
-	{ /* IMR2A / IMCR2A */ 0xe6940088, 0xe69400c8, 8,
-	  { 0, 0, 0, 0,
-	    BBIF1, BBIF2, MFIS, MFI } },
-	{ /* IMR3A / IMCR3A */ 0xe694008c, 0xe69400cc, 8,
-	  { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0,
-	    DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } },
-	{ /* IMR4A / IMCR4A */ 0xe6940090, 0xe69400d0, 8,
-	  { DDM, 0, 0, 0,
-	    0, 0, 0, 0 } },
-	{ /* IMR5A / IMCR5A */ 0xe6940094, 0xe69400d4, 8,
-	  { KEYSC, DMAC1_2_DADERR, DMAC1_2_DEI5, DMAC1_2_DEI4,
-	    SCIFA3, SCIFA2, SCIFA1, SCIFA0 } },
-	{ /* IMR6A / IMCR6A */ 0xe6940098, 0xe69400d8, 8,
-	  { SCIFB, SCIFA5, SCIFA4, MSIOF1,
-	    0, 0, MSIOF2, 0 } },
-	{ /* IMR7A / IMCR7A */ 0xe694009c, 0xe69400dc, 8,
-	  { SDHI0_3, SDHI0_2, SDHI0_1, SDHI0_0,
-	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
-	{ /* IMR8A / IMCR8A */ 0xe69400a0, 0xe69400e0, 8,
-	  { SDHI1_3, SDHI1_2, SDHI1_1, SDHI1_0,
-	    0, USBHSDMAC, 0, AP_ARM_L2CINT } },
-	{ /* IMR9A / IMCR9A */ 0xe69400a4, 0xe69400e4, 8,
-	  { CMT1_3, CMT1_2, CMT1_1, CMT1_0,
-	    CMT2, USBF_IXL_INT, USBF_OUL_SOF, SGX540 } },
-	{ /* IMR10A / IMCR10A */ 0xe69400a8, 0xe69400e8, 8,
-	  { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4,
-	    0, 0, 0, 0 } },
-	{ /* IMR11A / IMCR11A */ 0xe69400ac, 0xe69400ec, 8,
-	  { IIC1_DTEI, IIC1_WAITI, IIC1_TACKI, IIC1_ALI,
-	    ICBS0, 0, 0, 0 } },
-	{ /* IMR12A / IMCR12A */ 0xe69400b0, 0xe69400f0, 8,
-	  { 0, 0, TPU0, SCIFA6,
-	    SCIFA7, GbEther, 0, 0 } },
-	{ /* IMR13A / IMCR13A */ 0xe69400b4, 0xe69400f4, 8,
-	  { SDHI2_3, SDHI2_2, SDHI2_1, SDHI2_0,
-	    0, CMT3, 0, RWDT0 } },
-	{ /* IMR0A3 / IMCR0A3 */ 0xe6950080, 0xe69500c0, 8,
-	  { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0,
-	    0, 0, 0, 0 } },
-	  /* IMR1A3 / IMCR1A3 */
-	{ /* IMR2A3 / IMCR2A3 */ 0xe6950088, 0xe69500c8, 8,
-	  { 0, 0, USBH_INT, USBH_OHCI,
-	    USBH_EHCI, USBH_PME, USBH_BIND, 0 } },
-	  /* IMR3A3 / IMCR3A3 */
-	{ /* IMR4A3 / IMCR4A3 */ 0xe6950090, 0xe69500d0, 8,
-	  { HDMI, 0, 0, 0,
-	    RSPI_OVRF, RSPI_SPTEF, RSPI_SPRF, 0 } },
-	{ /* IMR5A3 / IMCR5A3 */ 0xe6950094, 0xe69500d4, 8,
-	  { SPU2_0, SPU2_1, FSI, FMSI,
-	    0, HDMI_SSS, HDMI_KEY, 0 } },
-	{ /* IMR6A3 / IMCR6A3 */ 0xe6950098, 0xe69500d8, 8,
-	  { 0, IPMMU, 0, 0,
-	    AP_ARM_CTIIRQ, AP_ARM_PMURQ, 0, 0 } },
-	{ /* IMR7A3 / IMCR7A3 */ 0xe695009c, 0xe69500dc, 8,
-	  { MFIS2, CPORTR2S, CMT14, CMT15,
-	    0, MMCIF_0, MMCIF_1, MMCIF_2 } },
-	  /* IMR8A3 / IMCR8A3 */
-	{ /* IMR9A3 / IMCR9A3 */ 0xe69500a4, 0xe69500e4, 8,
-	  { SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI,
-	    STPRO_0, STPRO_1, STPRO_2, STPRO_3 } },
-	{ /* IMR10A3 / IMCR10A3 */ 0xe69500a8, 0xe69500e8, 8,
-	  { STPRO_4, 0, 0, 0,
-	    0, 0, 0, 0 } },
-};
-
-static struct intc_prio_reg intca_prio_registers[] __initdata = {
-	{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, ICBS0 } },
-	{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } },
-	{ 0xe6940008, 0, 16, 4, /* IPRCA */ { ATAPI, 0, CMT1_1, AP_ARM1 } },
-	{ 0xe694000c, 0, 16, 4, /* IPRDA */ { 0, 0, CMT1_2, 0 } },
-	{ 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC1_1, MFIS, MFI, USBF } },
-	{ 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC, DMAC1_2,
-					      SGX540, CMT1_0 } },
-	{ 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1,
-					      SCIFA2, SCIFA3 } },
-	{ 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBHSDMAC,
-					      FLCTL, SDHI0 } },
-	{ 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, 0, IIC1 } },
-	{ 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2,
-					      AP_ARM_L2CINT, 0 } },
-	{ 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_3, 0, SDHI1 } },
-	{ 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, SCIFA6,
-					      SCIFA7, GbEther } },
-	{ 0xe6940030, 0, 16, 4, /* IPRMA */ { 0, CMT3, 0, RWDT0 } },
-	{ 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } },
-	{ 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } },
-	{ 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } },
-				/* IPRBA3 */
-				/* IPRCA3 */
-				/* IPRDA3 */
-	{ 0xe6950010, 0, 16, 4, /* IPREA3 */ { USBH1, 0, 0, 0 } },
-	{ 0xe6950014, 0, 16, 4, /* IPRFA3 */ { USBH2, 0, 0, 0 } },
-				/* IPRGA3 */
-				/* IPRHA3 */
-	{ 0xe6950020, 0, 16, 4, /* IPRIA3 */ { HDMI, 0, 0, 0 } },
-	{ 0xe6950024, 0, 16, 4, /* IPRJA3 */ { RSPI, 0, 0, 0 } },
-	{ 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } },
-	{ 0xe695002c, 0, 16, 4, /* IPRLA3 */ { 0, HDMI_SSS, HDMI_KEY, 0 } },
-	{ 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU, 0, 0, 0 } },
-	{ 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } },
-	{ 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S,
-					       CMT14, CMT15 } },
-	{ 0xe695003c, 0, 16, 4, /* IPRPA3 */ { 0, MMCIF_0, MMCIF_1, MMCIF_2 } },
-				/* IPRQA3 */
-				/* IPRRA3 */
-	{ 0xe6950048, 0, 16, 4, /* IPRSA3 */ { SIM_ERI, SIM_RXI,
-					       SIM_TXI, SIM_TEI } },
-	{ 0xe695004c, 0, 16, 4, /* IPRTA3 */ { STPRO_0, STPRO_1,
-					       STPRO_2, STPRO_3 } },
-	{ 0xe6950050, 0, 16, 4, /* IPRUA3 */ { STPRO_4, 0, 0, 0 } },
-};
-
-static DECLARE_INTC_DESC(intca_desc, "r8a7740-intca",
-			 intca_vectors, intca_groups,
-			 intca_mask_registers, intca_prio_registers,
-			 NULL);
-
-INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
-		 INTC_VECT, "r8a7740-intca-irq-pins");
-
-
-/*
- *		INTCS
- */
-enum {
-	UNUSED_INTCS = 0,
-
-	INTCS,
-
-	/* interrupt sources INTCS */
-
-	/* HUDI */
-	/* STPRO */
-	/* RTDMAC(1) */
-	VPU5HA2,
-	_2DG_TRAP, _2DG_GPM_INT, _2DG_CER_INT,
-	/* MFI */
-	/* BBIF2 */
-	VPU5F,
-	_2DG_BRK_INT,
-	/* SGX540 */
-	/* 2DDMAC */
-	/* IPMMU */
-	/* RTDMAC 2 */
-	/* KEYSC */
-	/* MSIOF */
-	IIC0_ALI, IIC0_TACKI, IIC0_WAITI, IIC0_DTEI,
-	TMU0_0, TMU0_1, TMU0_2,
-	CMT0,
-	/* CMT2 */
-	LMB,
-	CTI,
-	VOU,
-	/* RWDT0 */
-	ICB,
-	VIO6C,
-	CEU20, CEU21,
-	JPU,
-	LCDC0,
-	LCRC,
-	/* RTDMAC2(1) */
-	/* RTDMAC2(2) */
-	LCDC1,
-	/* SPU2 */
-	/* FSI */
-	/* FMSI */
-	TMU1_0, TMU1_1, TMU1_2,
-	CMT4,
-	DISP,
-	DSRV,
-	/* MFIS2 */
-	CPORTS2R,
-
-	/* interrupt groups INTCS */
-	_2DG1,
-	IIC0, TMU1,
-};
-
-static struct intc_vect intcs_vectors[] = {
-	/* HUDI */
-	/* STPRO */
-	/* RTDMAC(1) */
-	INTCS_VECT(VPU5HA2,		0x0880),
-	INTCS_VECT(_2DG_TRAP,		0x08A0),
-	INTCS_VECT(_2DG_GPM_INT,	0x08C0),
-	INTCS_VECT(_2DG_CER_INT,	0x08E0),
-	/* MFI */
-	/* BBIF2 */
-	INTCS_VECT(VPU5F,		0x0980),
-	INTCS_VECT(_2DG_BRK_INT,	0x09A0),
-	/* SGX540 */
-	/* 2DDMAC */
-	/* IPMMU */
-	/* RTDMAC(2) */
-	/* KEYSC */
-	/* MSIOF */
-	INTCS_VECT(IIC0_ALI,		0x0E00),
-	INTCS_VECT(IIC0_TACKI,		0x0E20),
-	INTCS_VECT(IIC0_WAITI,		0x0E40),
-	INTCS_VECT(IIC0_DTEI,		0x0E60),
-	INTCS_VECT(TMU0_0,		0x0E80),
-	INTCS_VECT(TMU0_1,		0x0EA0),
-	INTCS_VECT(TMU0_2,		0x0EC0),
-	INTCS_VECT(CMT0,		0x0F00),
-	/* CMT2 */
-	INTCS_VECT(LMB,			0x0F60),
-	INTCS_VECT(CTI,			0x0400),
-	INTCS_VECT(VOU,			0x0420),
-	/* RWDT0 */
-	INTCS_VECT(ICB,			0x0480),
-	INTCS_VECT(VIO6C,		0x04E0),
-	INTCS_VECT(CEU20,		0x0500),
-	INTCS_VECT(CEU21,		0x0520),
-	INTCS_VECT(JPU,			0x0560),
-	INTCS_VECT(LCDC0,		0x0580),
-	INTCS_VECT(LCRC,		0x05A0),
-	/* RTDMAC2(1) */
-	/* RTDMAC2(2) */
-	INTCS_VECT(LCDC1,		0x1780),
-	/* SPU2 */
-	/* FSI */
-	/* FMSI */
-	INTCS_VECT(TMU1_0,		0x1900),
-	INTCS_VECT(TMU1_1,		0x1920),
-	INTCS_VECT(TMU1_2,		0x1940),
-	INTCS_VECT(CMT4,		0x1980),
-	INTCS_VECT(DISP,		0x19A0),
-	INTCS_VECT(DSRV,		0x19C0),
-	/* MFIS2 */
-	INTCS_VECT(CPORTS2R,		0x1A20),
-
-	INTC_VECT(INTCS,		0xf80),
-};
-
-static struct intc_group intcs_groups[] __initdata = {
-	INTC_GROUP(_2DG1, /*FIXME*/
-		   _2DG_CER_INT, _2DG_GPM_INT, _2DG_TRAP),
-	INTC_GROUP(IIC0,
-		   IIC0_DTEI, IIC0_WAITI, IIC0_TACKI, IIC0_ALI),
-	INTC_GROUP(TMU1,
-		   TMU1_0, TMU1_1, TMU1_2),
-};
-
-static struct intc_mask_reg intcs_mask_registers[] = {
-	  /* IMR0SA / IMCR0SA */ /* all 0 */
-	{ /* IMR1SA / IMCR1SA */ 0xffd20184, 0xffd201c4, 8,
-	  { _2DG_CER_INT, _2DG_GPM_INT, _2DG_TRAP, VPU5HA2,
-	    0, 0, 0, 0 /*STPRO*/ } },
-	{ /* IMR2SA / IMCR2SA */ 0xffd20188, 0xffd201c8, 8,
-	  { 0/*STPRO*/, 0, CEU21, VPU5F,
-	    0/*BBIF2*/, 0, 0, 0/*MFI*/ } },
-	{ /* IMR3SA / IMCR3SA */ 0xffd2018c, 0xffd201cc, 8,
-	  { 0, 0, 0, 0, /*2DDMAC*/
-	    VIO6C, 0, 0, ICB } },
-	{ /* IMR4SA / IMCR4SA */ 0xffd20190, 0xffd201d0, 8,
-	  { 0, 0, VOU, CTI,
-	    JPU, 0, LCRC, LCDC0 } },
-	  /* IMR5SA / IMCR5SA */ /*KEYSC/RTDMAC2/RTDMAC1*/
-	  /* IMR6SA / IMCR6SA */ /*MSIOF/SGX540*/
-	{ /* IMR7SA / IMCR7SA */ 0xffd2019c, 0xffd201dc, 8,
-	  { 0, TMU0_2, TMU0_1, TMU0_0,
-	    0, 0, 0, 0 } },
-	{ /* IMR8SA / IMCR8SA */ 0xffd201a0, 0xffd201e0, 8,
-	  { 0, 0, 0, 0,
-	    CEU20, 0, 0, 0 } },
-	{ /* IMR9SA / IMCR9SA */ 0xffd201a4, 0xffd201e4, 8,
-	  { 0, 0/*RWDT0*/, 0/*CMT2*/, CMT0,
-	    0, 0, 0, 0 } },
-	  /* IMR10SA / IMCR10SA */ /*IPMMU*/
-	{ /* IMR11SA / IMCR11SA */ 0xffd201ac, 0xffd201ec, 8,
-	  { IIC0_DTEI, IIC0_WAITI, IIC0_TACKI, IIC0_ALI,
-	    0, _2DG_BRK_INT, LMB, 0 } },
-	  /* IMR12SA / IMCR12SA */
-	  /* IMR13SA / IMCR13SA */
-	  /* IMR0SA3 / IMCR0SA3 */ /*RTDMAC2(1)/RTDMAC2(2)*/
-	  /* IMR1SA3 / IMCR1SA3 */
-	  /* IMR2SA3 / IMCR2SA3 */
-	  /* IMR3SA3 / IMCR3SA3 */
-	{ /* IMR4SA3 / IMCR4SA3 */ 0xffd50190, 0xffd501d0, 8,
-	  { 0, 0, 0, 0,
-	    LCDC1, 0, 0, 0 } },
-	  /* IMR5SA3 / IMCR5SA3 */ /* SPU2/FSI/FMSI */
-	{ /* IMR6SA3 / IMCR6SA3 */ 0xffd50198, 0xffd501d8, 8,
-	  { TMU1_0, TMU1_1, TMU1_2, 0,
-	    CMT4, DISP, DSRV, 0 } },
-	{ /* IMR7SA3 / IMCR7SA3 */ 0xffd5019c, 0xffd501dc, 8,
-	  { 0/*MFIS2*/, CPORTS2R, 0, 0,
-	    0, 0, 0, 0 } },
-	{ /* INTAMASK */ 0xffd20104, 0, 16,
-	  { 0, 0, 0, 0, 0, 0, 0, 0,
-	    0, 0, 0, 0, 0, 0, 0, INTCS } },
-};
-
-/* Priority is needed for INTCA to receive the INTCS interrupt */
-static struct intc_prio_reg intcs_prio_registers[] = {
-	{ 0xffd20000, 0, 16, 4, /* IPRAS */ { CTI, VOU, 0/*2DDMAC*/, ICB } },
-	{ 0xffd20004, 0, 16, 4, /* IPRBS */ { JPU, LCDC0, 0, LCRC } },
-				/* IPRCS */ /*BBIF2*/
-				/* IPRDS */
-	{ 0xffd20010, 0, 16, 4, /* IPRES */ { 0/*RTDMAC(1)*/, VPU5HA2,
-					      0/*MFI*/, VPU5F } },
-	{ 0xffd20014, 0, 16, 4, /* IPRFS */ { 0/*KEYSC*/, 0/*RTDMAC(2)*/,
-					      0/*CMT2*/, CMT0 } },
-	{ 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU0_0, TMU0_1,
-					      TMU0_2, _2DG1 } },
-	{ 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, 0/*STPRO*/, 0/*STPRO*/,
-					      _2DG_BRK_INT/*FIXME*/ } },
-	{ 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, 0/*MSIOF*/, 0, IIC0 } },
-	{ 0xffd20024, 0, 16, 4, /* IPRJS */ { CEU20, 0/*SGX540*/, 0, 0 } },
-	{ 0xffd20028, 0, 16, 4, /* IPRKS */ { VIO6C, 0, LMB, 0 } },
-	{ 0xffd2002c, 0, 16, 4, /* IPRLS */ { 0/*IPMMU*/, 0, CEU21, 0 } },
-				/* IPRMS */ /*RWDT0*/
-				/* IPRAS3 */ /*RTDMAC2(1)*/
-				/* IPRBS3 */ /*RTDMAC2(2)*/
-				/* IPRCS3 */
-				/* IPRDS3 */
-				/* IPRES3 */
-				/* IPRFS3 */
-				/* IPRGS3 */
-				/* IPRHS3 */
-				/* IPRIS3 */
-	{ 0xffd50024, 0, 16, 4, /* IPRJS3 */ { LCDC1, 0, 0, 0 } },
-				/* IPRKS3 */ /*SPU2/FSI/FMSi*/
-				/* IPRLS3 */
-	{ 0xffd50030, 0, 16, 4, /* IPRMS3 */ { TMU1, 0, 0, 0 } },
-	{ 0xffd50034, 0, 16, 4, /* IPRNS3 */ { CMT4, DISP, DSRV, 0 } },
-	{ 0xffd50038, 0, 16, 4, /* IPROS3 */ { 0/*MFIS2*/, CPORTS2R, 0, 0 } },
-				/* IPRPS3 */
-};
-
-static struct resource intcs_resources[] __initdata = {
-	[0] = {
-		.start	= 0xffd20000,
-		.end	= 0xffd201ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0xffd50000,
-		.end	= 0xffd501ff,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct intc_desc intcs_desc __initdata = {
-	.name = "r8a7740-intcs",
-	.resource = intcs_resources,
-	.num_resources = ARRAY_SIZE(intcs_resources),
-	.hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,
-			   intcs_prio_registers, NULL, NULL),
-};
-
-static void intcs_demux(unsigned int irq, struct irq_desc *desc)
-{
-	void __iomem *reg = (void *)irq_get_handler_data(irq);
-	unsigned int evtcodeas = ioread32(reg);
-
-	generic_handle_irq(intcs_evt2irq(evtcodeas));
-}
+#include <linux/irqchip/arm-gic.h>
 
 void __init r8a7740_init_irq(void)
 {
-	void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
-
-	register_intc_controller(&intca_desc);
-	register_intc_controller(&intca_irq_pins_desc);
-	register_intc_controller(&intcs_desc);
-
-	/* demux using INTEVTSA */
-	irq_set_handler_data(evt2irq(0xf80), (void *)intevtsa);
-	irq_set_chained_handler(evt2irq(0xf80), intcs_demux);
+	void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000);
+	void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000);
+	void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10);
+	void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10);
+	void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4);
+
+	/* initialize the Generic Interrupt Controller PL390 r0p0 */
+	gic_init(0, 29, gic_dist_base, gic_cpu_base);
+
+	/* route signals to GIC */
+	iowrite32(0x0, pfc_inta_ctrl);
+
+	/*
+	 * To mask the shared interrupt to SPI 149 we must ensure to set
+	 * PRIO *and* MASK. Else we run into IRQ floods when registering
+	 * the intc_irqpin devices
+	 */
+	iowrite32(0x0, intc_prio_base + 0x0);
+	iowrite32(0x0, intc_prio_base + 0x4);
+	iowrite32(0x0, intc_prio_base + 0x8);
+	iowrite32(0x0, intc_prio_base + 0xc);
+	iowrite8(0xff, intc_msk_base + 0x0);
+	iowrite8(0xff, intc_msk_base + 0x4);
+	iowrite8(0xff, intc_msk_base + 0x8);
+	iowrite8(0xff, intc_msk_base + 0xc);
+
+	iounmap(intc_prio_base);
+	iounmap(intc_msk_base);
+	iounmap(pfc_inta_ctrl);
 }
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 8b85d4d..228d7ab 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/platform_data/irq-renesas-intc-irqpin.h>
 #include <linux/platform_device.h>
 #include <linux/of_platform.h>
 #include <linux/serial_sci.h>
@@ -94,6 +95,126 @@ void __init r8a7740_pinmux_init(void)
 	platform_device_register(&r8a7740_pfc_device);
 }
 
+static struct renesas_intc_irqpin_config irqpin0_platform_data = {
+	.irq_base = irq_pin(0), /* IRQ0 -> IRQ7 */
+};
+
+static struct resource irqpin0_resources[] = {
+	DEFINE_RES_MEM(0xe6900000, 4), /* ICR1A */
+	DEFINE_RES_MEM(0xe6900010, 4), /* INTPRI00A */
+	DEFINE_RES_MEM(0xe6900020, 1), /* INTREQ00A */
+	DEFINE_RES_MEM(0xe6900040, 1), /* INTMSK00A */
+	DEFINE_RES_MEM(0xe6900060, 1), /* INTMSKCLR00A */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ0 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ1 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ2 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ3 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ4 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ5 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ6 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ7 */
+};
+
+static struct platform_device irqpin0_device = {
+	.name		= "renesas_intc_irqpin",
+	.id		= 0,
+	.resource	= irqpin0_resources,
+	.num_resources	= ARRAY_SIZE(irqpin0_resources),
+	.dev		= {
+		.platform_data  = &irqpin0_platform_data,
+	},
+};
+
+static struct renesas_intc_irqpin_config irqpin1_platform_data = {
+	.irq_base = irq_pin(8), /* IRQ8 -> IRQ15 */
+};
+
+static struct resource irqpin1_resources[] = {
+	DEFINE_RES_MEM(0xe6900004, 4), /* ICR2A */
+	DEFINE_RES_MEM(0xe6900014, 4), /* INTPRI10A */
+	DEFINE_RES_MEM(0xe6900024, 1), /* INTREQ10A */
+	DEFINE_RES_MEM(0xe6900044, 1), /* INTMSK10A */
+	DEFINE_RES_MEM(0xe6900064, 1), /* INTMSKCLR10A */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ8 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ9 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ10 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ11 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ12 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ13 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ14 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ15 */
+};
+
+static struct platform_device irqpin1_device = {
+	.name		= "renesas_intc_irqpin",
+	.id		= 1,
+	.resource	= irqpin1_resources,
+	.num_resources	= ARRAY_SIZE(irqpin1_resources),
+	.dev		= {
+		.platform_data  = &irqpin1_platform_data,
+	},
+};
+
+static struct renesas_intc_irqpin_config irqpin2_platform_data = {
+	.irq_base = irq_pin(16), /* IRQ16 -> IRQ23 */
+};
+
+static struct resource irqpin2_resources[] = {
+	DEFINE_RES_MEM(0xe6900008, 4), /* ICR3A */
+	DEFINE_RES_MEM(0xe6900018, 4), /* INTPRI30A */
+	DEFINE_RES_MEM(0xe6900028, 1), /* INTREQ30A */
+	DEFINE_RES_MEM(0xe6900048, 1), /* INTMSK30A */
+	DEFINE_RES_MEM(0xe6900068, 1), /* INTMSKCLR30A */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ16 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ17 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ18 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ19 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ20 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ21 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ22 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ23 */
+};
+
+static struct platform_device irqpin2_device = {
+	.name		= "renesas_intc_irqpin",
+	.id		= 2,
+	.resource	= irqpin2_resources,
+	.num_resources	= ARRAY_SIZE(irqpin2_resources),
+	.dev		= {
+		.platform_data  = &irqpin2_platform_data,
+	},
+};
+
+static struct renesas_intc_irqpin_config irqpin3_platform_data = {
+	.irq_base = irq_pin(24), /* IRQ24 -> IRQ31 */
+};
+
+static struct resource irqpin3_resources[] = {
+	DEFINE_RES_MEM(0xe690000c, 4), /* ICR3A */
+	DEFINE_RES_MEM(0xe690001c, 4), /* INTPRI30A */
+	DEFINE_RES_MEM(0xe690002c, 1), /* INTREQ30A */
+	DEFINE_RES_MEM(0xe690004c, 1), /* INTMSK30A */
+	DEFINE_RES_MEM(0xe690006c, 1), /* INTMSKCLR30A */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ24 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ25 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ26 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ27 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ28 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ29 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ30 */
+	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ31 */
+};
+
+static struct platform_device irqpin3_device = {
+	.name		= "renesas_intc_irqpin",
+	.id		= 3,
+	.resource	= irqpin3_resources,
+	.num_resources	= ARRAY_SIZE(irqpin3_resources),
+	.dev		= {
+		.platform_data  = &irqpin3_platform_data,
+	},
+};
+
 /* SCIFA0 */
 static struct plat_sci_port scif0_platform_data = {
 	.mapbase	= 0xe6c40000,
@@ -101,7 +222,7 @@ static struct plat_sci_port scif0_platform_data = {
 	.scscr		= SCSCR_RE | SCSCR_TE,
 	.scbrr_algo_id	= SCBRR_ALGO_4,
 	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x0c00)),
+	.irqs		= SCIx_IRQ_MUXED(gic_spi(100)),
 };
 
 static struct platform_device scif0_device = {
@@ -119,7 +240,7 @@ static struct plat_sci_port scif1_platform_data = {
 	.scscr		= SCSCR_RE | SCSCR_TE,
 	.scbrr_algo_id	= SCBRR_ALGO_4,
 	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x0c20)),
+	.irqs		= SCIx_IRQ_MUXED(gic_spi(101)),
 };
 
 static struct platform_device scif1_device = {
@@ -137,7 +258,7 @@ static struct plat_sci_port scif2_platform_data = {
 	.scscr		= SCSCR_RE | SCSCR_TE,
 	.scbrr_algo_id	= SCBRR_ALGO_4,
 	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x0c40)),
+	.irqs		= SCIx_IRQ_MUXED(gic_spi(102)),
 };
 
 static struct platform_device scif2_device = {
@@ -155,7 +276,7 @@ static struct plat_sci_port scif3_platform_data = {
 	.scscr		= SCSCR_RE | SCSCR_TE,
 	.scbrr_algo_id	= SCBRR_ALGO_4,
 	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x0c60)),
+	.irqs		= SCIx_IRQ_MUXED(gic_spi(103)),
 };
 
 static struct platform_device scif3_device = {
@@ -173,7 +294,7 @@ static struct plat_sci_port scif4_platform_data = {
 	.scscr		= SCSCR_RE | SCSCR_TE,
 	.scbrr_algo_id	= SCBRR_ALGO_4,
 	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x0d20)),
+	.irqs		= SCIx_IRQ_MUXED(gic_spi(104)),
 };
 
 static struct platform_device scif4_device = {
@@ -191,7 +312,7 @@ static struct plat_sci_port scif5_platform_data = {
 	.scscr		= SCSCR_RE | SCSCR_TE,
 	.scbrr_algo_id	= SCBRR_ALGO_4,
 	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x0d40)),
+	.irqs		= SCIx_IRQ_MUXED(gic_spi(105)),
 };
 
 static struct platform_device scif5_device = {
@@ -209,7 +330,7 @@ static struct plat_sci_port scif6_platform_data = {
 	.scscr		= SCSCR_RE | SCSCR_TE,
 	.scbrr_algo_id	= SCBRR_ALGO_4,
 	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x04c0)),
+	.irqs		= SCIx_IRQ_MUXED(gic_spi(106)),
 };
 
 static struct platform_device scif6_device = {
@@ -227,7 +348,7 @@ static struct plat_sci_port scif7_platform_data = {
 	.scscr		= SCSCR_RE | SCSCR_TE,
 	.scbrr_algo_id	= SCBRR_ALGO_4,
 	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x04e0)),
+	.irqs		= SCIx_IRQ_MUXED(gic_spi(107)),
 };
 
 static struct platform_device scif7_device = {
@@ -245,7 +366,7 @@ static struct plat_sci_port scifb_platform_data = {
 	.scscr		= SCSCR_RE | SCSCR_TE,
 	.scbrr_algo_id	= SCBRR_ALGO_4,
 	.type		= PORT_SCIFB,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x0d60)),
+	.irqs		= SCIx_IRQ_MUXED(gic_spi(108)),
 };
 
 static struct platform_device scifb_device = {
@@ -273,7 +394,7 @@ static struct resource cmt10_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= evt2irq(0x0b00),
+		.start	= gic_spi(58),
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -304,7 +425,7 @@ static struct resource tmu00_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= intcs_evt2irq(0xe80),
+		.start	= gic_spi(198),
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -334,7 +455,7 @@ static struct resource tmu01_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= intcs_evt2irq(0xea0),
+		.start	= gic_spi(199),
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -364,7 +485,7 @@ static struct resource tmu02_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= intcs_evt2irq(0xec0),
+		.start	= gic_spi(200),
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -411,6 +532,10 @@ static struct platform_device ipmmu_device = {
 };
 
 static struct platform_device *r8a7740_early_devices[] __initdata = {
+	&irqpin0_device,
+	&irqpin1_device,
+	&irqpin2_device,
+	&irqpin3_device,
 	&scif0_device,
 	&scif1_device,
 	&scif2_device,
@@ -525,14 +650,14 @@ static struct resource r8a7740_dmae0_resources[] = {
 	},
 	{
 		.name	= "error_irq",
-		.start	= evt2irq(0x20c0),
-		.end	= evt2irq(0x20c0),
+		.start	= gic_spi(34),
+		.end	= gic_spi(34),
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
 		/* IRQ for channels 0-5 */
-		.start	= evt2irq(0x2000),
-		.end	= evt2irq(0x20a0),
+		.start	= gic_spi(28),
+		.end	= gic_spi(33),
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -553,14 +678,14 @@ static struct resource r8a7740_dmae1_resources[] = {
 	},
 	{
 		.name	= "error_irq",
-		.start	= evt2irq(0x21c0),
-		.end	= evt2irq(0x21c0),
+		.start	= gic_spi(41),
+		.end	= gic_spi(41),
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
 		/* IRQ for channels 0-5 */
-		.start	= evt2irq(0x2100),
-		.end	= evt2irq(0x21a0),
+		.start	= gic_spi(35),
+		.end	= gic_spi(40),
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -581,14 +706,14 @@ static struct resource r8a7740_dmae2_resources[] = {
 	},
 	{
 		.name	= "error_irq",
-		.start	= evt2irq(0x22c0),
-		.end	= evt2irq(0x22c0),
+		.start	= gic_spi(48),
+		.end	= gic_spi(48),
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
 		/* IRQ for channels 0-5 */
-		.start	= evt2irq(0x2200),
-		.end	= evt2irq(0x22a0),
+		.start	= gic_spi(42),
+		.end	= gic_spi(47),
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -677,8 +802,8 @@ static struct resource r8a7740_usb_dma_resources[] = {
 	},
 	{
 		/* IRQ for channels */
-		.start	= evt2irq(0x0a00),
-		.end	= evt2irq(0x0a00),
+		.start	= gic_spi(49),
+		.end	= gic_spi(49),
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -702,8 +827,8 @@ static struct resource i2c0_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= intcs_evt2irq(0xe00),
-		.end	= intcs_evt2irq(0xe60),
+		.start	= gic_spi(201),
+		.end	= gic_spi(204),
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -716,8 +841,8 @@ static struct resource i2c1_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = evt2irq(0x780), /* IIC1_ALI1 */
-		.end    = evt2irq(0x7e0), /* IIC1_DTEI1 */
+		.start  = gic_spi(70), /* IIC1_ALI1 */
+		.end    = gic_spi(73), /* IIC1_DTEI1 */
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -738,8 +863,8 @@ static struct platform_device i2c1_device = {
 
 static struct resource pmu_resources[] = {
 	[0] = {
-		.start	= evt2irq(0x19a0),
-		.end	= evt2irq(0x19a0),
+		.start	= gic_spi(83),
+		.end	= gic_spi(83),
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -904,7 +1029,6 @@ DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
 	.map_io		= r8a7740_map_io,
 	.init_early	= r8a7740_add_early_devices_dt,
 	.init_irq	= r8a7740_init_irq,
-	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= r8a7740_add_standard_devices_dt,
 	.init_time	= shmobile_timer_init,
 	.dt_compat	= r8a7740_boards_compat_dt,
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
index 214788c..2b52828 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
@@ -2545,38 +2545,38 @@ static struct pinmux_data_reg pinmux_data_regs[] = {
 };
 
 static struct pinmux_irq pinmux_irqs[] = {
-	PINMUX_IRQ(evt2irq(0x0200), PORT2_FN0,	 PORT13_FN0),	/* IRQ0A */
-	PINMUX_IRQ(evt2irq(0x0220), PORT20_FN0),		/* IRQ1A */
-	PINMUX_IRQ(evt2irq(0x0240), PORT11_FN0,	 PORT12_FN0),	/* IRQ2A */
-	PINMUX_IRQ(evt2irq(0x0260), PORT10_FN0,	 PORT14_FN0),	/* IRQ3A */
-	PINMUX_IRQ(evt2irq(0x0280), PORT15_FN0,	 PORT172_FN0),	/* IRQ4A */
-	PINMUX_IRQ(evt2irq(0x02A0), PORT0_FN0,	 PORT1_FN0),	/* IRQ5A */
-	PINMUX_IRQ(evt2irq(0x02C0), PORT121_FN0, PORT173_FN0),	/* IRQ6A */
-	PINMUX_IRQ(evt2irq(0x02E0), PORT120_FN0, PORT209_FN0),	/* IRQ7A */
-	PINMUX_IRQ(evt2irq(0x0300), PORT119_FN0),		/* IRQ8A */
-	PINMUX_IRQ(evt2irq(0x0320), PORT118_FN0, PORT210_FN0),	/* IRQ9A */
-	PINMUX_IRQ(evt2irq(0x0340), PORT19_FN0),		/* IRQ10A */
-	PINMUX_IRQ(evt2irq(0x0360), PORT104_FN0),		/* IRQ11A */
-	PINMUX_IRQ(evt2irq(0x0380), PORT42_FN0,	 PORT97_FN0),	/* IRQ12A */
-	PINMUX_IRQ(evt2irq(0x03A0), PORT64_FN0,	 PORT98_FN0),	/* IRQ13A */
-	PINMUX_IRQ(evt2irq(0x03C0), PORT63_FN0,	 PORT99_FN0),	/* IRQ14A */
-	PINMUX_IRQ(evt2irq(0x03E0), PORT62_FN0,	 PORT100_FN0),	/* IRQ15A */
-	PINMUX_IRQ(evt2irq(0x3200), PORT68_FN0,	 PORT211_FN0),	/* IRQ16A */
-	PINMUX_IRQ(evt2irq(0x3220), PORT69_FN0),		/* IRQ17A */
-	PINMUX_IRQ(evt2irq(0x3240), PORT70_FN0),		/* IRQ18A */
-	PINMUX_IRQ(evt2irq(0x3260), PORT71_FN0),		/* IRQ19A */
-	PINMUX_IRQ(evt2irq(0x3280), PORT67_FN0),		/* IRQ20A */
-	PINMUX_IRQ(evt2irq(0x32A0), PORT202_FN0),		/* IRQ21A */
-	PINMUX_IRQ(evt2irq(0x32C0), PORT95_FN0),		/* IRQ22A */
-	PINMUX_IRQ(evt2irq(0x32E0), PORT96_FN0),		/* IRQ23A */
-	PINMUX_IRQ(evt2irq(0x3300), PORT180_FN0),		/* IRQ24A */
-	PINMUX_IRQ(evt2irq(0x3320), PORT38_FN0),		/* IRQ25A */
-	PINMUX_IRQ(evt2irq(0x3340), PORT58_FN0,	 PORT81_FN0),	/* IRQ26A */
-	PINMUX_IRQ(evt2irq(0x3360), PORT57_FN0,	 PORT168_FN0),	/* IRQ27A */
-	PINMUX_IRQ(evt2irq(0x3380), PORT56_FN0,	 PORT169_FN0),	/* IRQ28A */
-	PINMUX_IRQ(evt2irq(0x33A0), PORT50_FN0,	 PORT170_FN0),	/* IRQ29A */
-	PINMUX_IRQ(evt2irq(0x33C0), PORT49_FN0,	 PORT171_FN0),	/* IRQ30A */
-	PINMUX_IRQ(evt2irq(0x33E0), PORT41_FN0,	 PORT167_FN0),	/* IRQ31A */
+	PINMUX_IRQ(irq_pin(0), GPIO_PORT2,   GPIO_PORT13),	/* IRQ0A */
+	PINMUX_IRQ(irq_pin(1), GPIO_PORT20),		/* IRQ1A */
+	PINMUX_IRQ(irq_pin(2), GPIO_PORT11,  GPIO_PORT12),	/* IRQ2A */
+	PINMUX_IRQ(irq_pin(3), GPIO_PORT10,  GPIO_PORT14),	/* IRQ3A */
+	PINMUX_IRQ(irq_pin(4), GPIO_PORT15,  GPIO_PORT172),/* IRQ4A */
+	PINMUX_IRQ(irq_pin(5), GPIO_PORT0,   GPIO_PORT1),	/* IRQ5A */
+	PINMUX_IRQ(irq_pin(6), GPIO_PORT121, GPIO_PORT173),/* IRQ6A */
+	PINMUX_IRQ(irq_pin(7), GPIO_PORT120, GPIO_PORT209),/* IRQ7A */
+	PINMUX_IRQ(irq_pin(8), GPIO_PORT119),		/* IRQ8A */
+	PINMUX_IRQ(irq_pin(9), GPIO_PORT118, GPIO_PORT210),/* IRQ9A */
+	PINMUX_IRQ(irq_pin(10), GPIO_PORT19),		/* IRQ10A */
+	PINMUX_IRQ(irq_pin(11), GPIO_PORT104),		/* IRQ11A */
+	PINMUX_IRQ(irq_pin(12), GPIO_PORT42,  GPIO_PORT97),	/* IRQ12A */
+	PINMUX_IRQ(irq_pin(13), GPIO_PORT64,  GPIO_PORT98),	/* IRQ13A */
+	PINMUX_IRQ(irq_pin(14), GPIO_PORT63,  GPIO_PORT99),	/* IRQ14A */
+	PINMUX_IRQ(irq_pin(15), GPIO_PORT62,  GPIO_PORT100),/* IRQ15A */
+	PINMUX_IRQ(irq_pin(16), GPIO_PORT68,  GPIO_PORT211),/* IRQ16A */
+	PINMUX_IRQ(irq_pin(17), GPIO_PORT69),		/* IRQ17A */
+	PINMUX_IRQ(irq_pin(18), GPIO_PORT70),		/* IRQ18A */
+	PINMUX_IRQ(irq_pin(19), GPIO_PORT71),		/* IRQ19A */
+	PINMUX_IRQ(irq_pin(20), GPIO_PORT67),		/* IRQ20A */
+	PINMUX_IRQ(irq_pin(21), GPIO_PORT202),		/* IRQ21A */
+	PINMUX_IRQ(irq_pin(22), GPIO_PORT95),		/* IRQ22A */
+	PINMUX_IRQ(irq_pin(23), GPIO_PORT96),		/* IRQ23A */
+	PINMUX_IRQ(irq_pin(24), GPIO_PORT180),		/* IRQ24A */
+	PINMUX_IRQ(irq_pin(25), GPIO_PORT38),		/* IRQ25A */
+	PINMUX_IRQ(irq_pin(26), GPIO_PORT58,  GPIO_PORT81),	/* IRQ26A */
+	PINMUX_IRQ(irq_pin(27), GPIO_PORT57,  GPIO_PORT168),/* IRQ27A */
+	PINMUX_IRQ(irq_pin(28), GPIO_PORT56,  GPIO_PORT169),/* IRQ28A */
+	PINMUX_IRQ(irq_pin(29), GPIO_PORT50,  GPIO_PORT170),/* IRQ29A */
+	PINMUX_IRQ(irq_pin(30), GPIO_PORT49,  GPIO_PORT171),/* IRQ30A */
+	PINMUX_IRQ(irq_pin(31), GPIO_PORT41,  GPIO_PORT167),/* IRQ31A */
 };
 
 struct sh_pfc_soc_info r8a7740_pinmux_info = {
-- 
1.7.10.4

[PATCH 12/30] ARM: shmobile: sh73a0: add a TWD clock

[Simon Horman]

From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

Add a TWD clock on sh73a0 for the smp_twd driver to properly update the
clock's frequency upon cpufreq events.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-sh73a0.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 34b5c5a..a57ec15 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -288,6 +288,20 @@ static struct clk div4_clks[DIV4_NR] = {
 	[DIV4_HP] = DIV4(FRQCRB, 4, 0xdff, 0),
 };
 
+static unsigned long twd_recalc(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / 4;
+}
+
+static struct sh_clk_ops twd_clk_ops = {
+	.recalc = twd_recalc,
+};
+
+static struct clk twd_clk = {
+	.parent = &div4_clks[DIV4_Z],
+	.ops = &twd_clk_ops,
+};
+
 enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_ZB1,
 	DIV6_FLCTL, DIV6_SDHI0, DIV6_SDHI1, DIV6_SDHI2,
 	DIV6_FSIA, DIV6_FSIB, DIV6_SUB,
@@ -482,6 +496,7 @@ static struct clk dsi1phy_clk = {
 static struct clk *late_main_clks[] = {
 	&dsi0phy_clk,
 	&dsi1phy_clk,
+	&twd_clk,
 };
 
 enum { MSTP001,
@@ -546,6 +561,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 static struct clk_lookup lookups[] = {
 	/* main clocks */
 	CLKDEV_CON_ID("r_clk", &r_clk),
+	CLKDEV_DEV_ID("smp_twd", &twd_clk), /* smp_twd */
 
 	/* DIV6 clocks */
 	CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
-- 
1.7.10.4

[PATCH 13/30] ARM: shmobile: sh73a0: remove DIV4_ZT* clocks

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

DIV4_ZT* clocks are for debugging and trace bus clock.
It is not necessary to control it from Linux/Software.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-sh73a0.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index a57ec15..26a5803 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -269,7 +269,7 @@ static struct clk_div4_table div4_table = {
 };
 
 enum { DIV4_I, DIV4_ZG, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2,
-	DIV4_Z, DIV4_ZTR, DIV4_ZT, DIV4_ZX, DIV4_HP, DIV4_NR };
+	DIV4_Z, DIV4_ZX, DIV4_HP, DIV4_NR };
 
 #define DIV4(_reg, _bit, _mask, _flags) \
 	SH_CLK_DIV4(&pll1_clk, _reg, _bit, _mask, _flags)
@@ -282,8 +282,6 @@ static struct clk div4_clks[DIV4_NR] = {
 	[DIV4_M1] = DIV4(FRQCRA, 4, 0x1dff, 0),
 	[DIV4_M2] = DIV4(FRQCRA, 0, 0x1dff, 0),
 	[DIV4_Z] = SH_CLK_DIV4(&pll0_clk, FRQCRB, 24, 0x97f, 0),
-	[DIV4_ZTR] = DIV4(FRQCRB, 20, 0xdff, 0),
-	[DIV4_ZT] = DIV4(FRQCRB, 16, 0xdff, 0),
 	[DIV4_ZX] = DIV4(FRQCRB, 12, 0xdff, 0),
 	[DIV4_HP] = DIV4(FRQCRB, 4, 0xdff, 0),
 };
-- 
1.7.10.4

[PATCH 14/30] ARM: shmobile: sh7372: remove DIV4_ZT* clocks

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

DIV4_ZT* clocks are for debugging and trace bus clock.
It is not necessary to control it from Linux/Software.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-sh7372.c |    6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 45d21fe..6c23e3f 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -342,7 +342,7 @@ static struct clk_div4_table div4_table = {
 };
 
 enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_CSIR,
-       DIV4_ZTR, DIV4_ZT, DIV4_ZX, DIV4_HP,
+       DIV4_ZX, DIV4_HP,
        DIV4_ISPB, DIV4_S, DIV4_ZB, DIV4_ZB3, DIV4_CP,
        DIV4_DDRP, DIV4_NR };
 
@@ -355,8 +355,6 @@ static struct clk div4_clks[DIV4_NR] = {
 	[DIV4_B] = DIV4(FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT),
 	[DIV4_M1] = DIV4(FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT),
 	[DIV4_CSIR] = DIV4(FRQCRA, 0, 0x6fff, 0),
-	[DIV4_ZTR] = DIV4(FRQCRB, 20, 0x6fff, 0),
-	[DIV4_ZT] = DIV4(FRQCRB, 16, 0x6fff, 0),
 	[DIV4_ZX] = DIV4(FRQCRB, 12, 0x6fff, 0),
 	[DIV4_HP] = DIV4(FRQCRB, 4, 0x6fff, 0),
 	[DIV4_ISPB] = DIV4(FRQCRC, 20, 0x6fff, 0),
@@ -516,8 +514,6 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]),
 	CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]),
 	CLKDEV_CON_ID("csir_clk", &div4_clks[DIV4_CSIR]),
-	CLKDEV_CON_ID("ztr_clk", &div4_clks[DIV4_ZTR]),
-	CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]),
 	CLKDEV_CON_ID("zx_clk", &div4_clks[DIV4_ZX]),
 	CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]),
 	CLKDEV_CON_ID("ispb_clk", &div4_clks[DIV4_ISPB]),
-- 
1.7.10.4

[PATCH 15/30] ARM: shmobile: add struct clk_ratio and fixed ratio clock macro

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Renesas chip has many clocks inside,
and some of them are using fixed ratio via parent clock.
Current shmobile clock code is using own divX_recalc function
and divX_clk_ops.
This patch can reduce these code

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock.c              |   13 +++++++++
 arch/arm/mach-shmobile/include/mach/clock.h |   39 +++++++++++++++++++++++++++
 2 files changed, 52 insertions(+)
 create mode 100644 arch/arm/mach-shmobile/include/mach/clock.h

diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c
index e816ca9..ad7df62 100644
--- a/arch/arm/mach-shmobile/clock.c
+++ b/arch/arm/mach-shmobile/clock.c
@@ -23,6 +23,19 @@
 #include <linux/init.h>
 #include <linux/sh_clk.h>
 #include <linux/export.h>
+#include <mach/clock.h>
+#include <mach/common.h>
+
+unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk)
+{
+	struct clk_ratio *p = clk->priv;
+
+	return clk->parent->rate / p->div * p->mul;
+};
+
+struct sh_clk_ops shmobile_fixed_ratio_clk_ops = {
+	.recalc	= shmobile_fixed_ratio_clk_recalc,
+};
 
 int __init shmobile_clk_init(void)
 {
diff --git a/arch/arm/mach-shmobile/include/mach/clock.h b/arch/arm/mach-shmobile/include/mach/clock.h
new file mode 100644
index 0000000..76ac612
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/clock.h
@@ -0,0 +1,39 @@
+#ifndef CLOCK_H
+#define CLOCK_H
+
+unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk);
+extern struct sh_clk_ops shmobile_fixed_ratio_clk_ops;
+
+/* clock ratio */
+struct clk_ratio {
+	int mul;
+	int div;
+};
+
+#define SH_CLK_RATIO(name, m, d)		\
+static struct clk_ratio name ##_ratio = {	\
+	.mul = m,				\
+	.div = d,				\
+}
+
+#define SH_FIXED_RATIO_CLKg(name, p, r)	\
+struct clk name = {			\
+	.parent	= &p,				\
+	.ops	= &shmobile_fixed_ratio_clk_ops,\
+	.priv	= &r ## _ratio,			\
+}
+
+#define SH_FIXED_RATIO_CLK(name, p, r)		\
+static SH_FIXED_RATIO_CLKg(name, p, r);
+
+#define SH_FIXED_RATIO_CLK_SET(name, p, m, d)	\
+	SH_CLK_RATIO(name, m, d);		\
+	SH_FIXED_RATIO_CLK(name, p, name);
+
+#define SH_CLK_SET_RATIO(p, m, d)	\
+{			\
+	(p)->mul = m;	\
+	(p)->div = d;	\
+}
+
+#endif
-- 
1.7.10.4

[PATCH 16/30] ARM: shmobile: sh7372: use fixed ratio clock

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Current clock-sh7372 is using own implement
for each divX clocks.
This patch switches to use fixed ratio clock,
and was tesed on mackerel board.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-sh7372.c |   44 ++++++---------------------------
 1 file changed, 7 insertions(+), 37 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 6c23e3f..7e10593 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -21,6 +21,7 @@
 #include <linux/io.h>
 #include <linux/sh_clk.h>
 #include <linux/clkdev.h>
+#include <mach/clock.h>
 #include <mach/common.h>
 
 /* SH7372 registers */
@@ -83,39 +84,12 @@ struct clk sh7372_extal2_clk = {
 	.rate		= 48000000,
 };
 
-/* A fixed divide-by-2 block */
-static unsigned long div2_recalc(struct clk *clk)
-{
-	return clk->parent->rate / 2;
-}
-
-static struct sh_clk_ops div2_clk_ops = {
-	.recalc		= div2_recalc,
-};
+SH_CLK_RATIO(div2, 1, 2);
 
-/* Divide dv_clki by two */
-struct clk sh7372_dv_clki_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &sh7372_dv_clki_clk,
-};
-
-/* Divide extal1 by two */
-static struct clk extal1_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &sh7372_extal1_clk,
-};
-
-/* Divide extal2 by two */
-static struct clk extal2_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &sh7372_extal2_clk,
-};
-
-/* Divide extal2 by four */
-static struct clk extal2_div4_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &extal2_div2_clk,
-};
+SH_FIXED_RATIO_CLKg(sh7372_dv_clki_div2_clk,	sh7372_dv_clki_clk,	div2);
+SH_FIXED_RATIO_CLK(extal1_div2_clk,		sh7372_extal1_clk,	div2);
+SH_FIXED_RATIO_CLK(extal2_div2_clk,		sh7372_extal2_clk,	div2);
+SH_FIXED_RATIO_CLK(extal2_div4_clk,		extal2_div2_clk,	div2);
 
 /* PLLC0 and PLLC1 */
 static unsigned long pllc01_recalc(struct clk *clk)
@@ -147,10 +121,7 @@ static struct clk pllc1_clk = {
 };
 
 /* Divide PLLC1 by two */
-static struct clk pllc1_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &pllc1_clk,
-};
+SH_FIXED_RATIO_CLK(pllc1_div2_clk,	pllc1_clk,	div2);
 
 /* PLLC2 */
 
@@ -650,5 +621,4 @@ void __init sh7372_clock_init(void)
 		shmobile_clk_init();
 	else
 		panic("failed to setup sh7372 clocks\n");
-
 }
-- 
1.7.10.4

[PATCH 17/30] ARM: shmobile: sh73a0: use fixed ratio clock

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Current clock-sh73a0 is using own implement
for each divX clocks.
This patch switches to use fixed ratio clock,
and was tesed on kzm9g board.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-sh73a0.c |   72 ++++++---------------------------
 1 file changed, 12 insertions(+), 60 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 26a5803..784fbaa 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -22,6 +22,7 @@
 #include <linux/sh_clk.h>
 #include <linux/clkdev.h>
 #include <asm/processor.h>
+#include <mach/clock.h>
 #include <mach/common.h>
 
 #define FRQCRA		IOMEM(0xe6150000)
@@ -83,61 +84,16 @@ struct clk sh73a0_extal2_clk = {
 	.rate		= 48000000,
 };
 
-/* A fixed divide-by-2 block */
-static unsigned long div2_recalc(struct clk *clk)
-{
-	return clk->parent->rate / 2;
-}
-
-static struct sh_clk_ops div2_clk_ops = {
-	.recalc		= div2_recalc,
-};
-
-static unsigned long div7_recalc(struct clk *clk)
-{
-	return clk->parent->rate / 7;
-}
-
-static struct sh_clk_ops div7_clk_ops = {
-	.recalc		= div7_recalc,
-};
-
-static unsigned long div13_recalc(struct clk *clk)
-{
-	return clk->parent->rate / 13;
-}
-
-static struct sh_clk_ops div13_clk_ops = {
-	.recalc		= div13_recalc,
-};
-
-/* Divide extal1 by two */
-static struct clk extal1_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &sh73a0_extal1_clk,
-};
-
-/* Divide extal2 by two */
-static struct clk extal2_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &sh73a0_extal2_clk,
-};
-
 static struct sh_clk_ops main_clk_ops = {
 	.recalc		= followparent_recalc,
 };
 
 /* Main clock */
 static struct clk main_clk = {
+	/* .parent wll be set on sh73a0_clock_init() */
 	.ops		= &main_clk_ops,
 };
 
-/* Divide Main clock by two */
-static struct clk main_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &main_clk,
-};
-
 /* PLL0, PLL1, PLL2, PLL3 */
 static unsigned long pll_recalc(struct clk *clk)
 {
@@ -193,21 +149,17 @@ static struct clk pll3_clk = {
 	.enable_bit	= 3,
 };
 
-/* Divide PLL */
-static struct clk pll1_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &pll1_clk,
-};
-
-static struct clk pll1_div7_clk = {
-	.ops		= &div7_clk_ops,
-	.parent		= &pll1_clk,
-};
+/* A fixed divide block */
+SH_CLK_RATIO(div2,  1, 2);
+SH_CLK_RATIO(div7,  1, 7);
+SH_CLK_RATIO(div13, 1, 13);
 
-static struct clk pll1_div13_clk = {
-	.ops		= &div13_clk_ops,
-	.parent		= &pll1_clk,
-};
+SH_FIXED_RATIO_CLK(extal1_div2_clk,	sh73a0_extal1_clk,	div2);
+SH_FIXED_RATIO_CLK(extal2_div2_clk,	sh73a0_extal2_clk,	div2);
+SH_FIXED_RATIO_CLK(main_div2_clk,	main_clk,		div2);
+SH_FIXED_RATIO_CLK(pll1_div2_clk,	pll1_clk,		div2);
+SH_FIXED_RATIO_CLK(pll1_div7_clk,	pll1_clk,		div7);
+SH_FIXED_RATIO_CLK(pll1_div13_clk,	pll1_clk,		div13);
 
 /* External input clock */
 struct clk sh73a0_extcki_clk = {
-- 
1.7.10.4

[PATCH 18/30] ARM: shmobile: r8a7740: tidyup comment/implementation mismatch

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Current clock-r8a7740's DIV4/DIV6/MSTP implemented area and
its comment are mismatching.
This patch tidyup its comment/implementation area.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7740.c |   60 +++++++++++++++++---------------
 1 file changed, 31 insertions(+), 29 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index 1feb9a2..161e128 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -323,6 +323,7 @@ struct clk *main_clks[] = {
 	&fsibck_clk,
 };
 
+/* DIV4 clocks */
 static void div4_kick(struct clk *clk)
 {
 	unsigned long value;
@@ -346,6 +347,26 @@ static struct clk_div4_table div4_table = {
 	.kick = div4_kick,
 };
 
+enum {
+	DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP,
+	DIV4_HPP, DIV4_USBP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP,
+	DIV4_NR
+};
+
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_ZG]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA,  8, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_M1]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA,  4, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_HP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRB,  4, 0x6fff, 0),
+	[DIV4_HPP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 20, 0x6fff, 0),
+	[DIV4_USBP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 16, 0x6fff, 0),
+	[DIV4_S]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 12, 0x6fff, 0),
+	[DIV4_ZB]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  8, 0x6fff, 0),
+	[DIV4_M3]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  4, 0x6fff, 0),
+	[DIV4_CP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  0, 0x6fff, 0),
+};
+
 /* DIV6 reparent */
 enum {
 	DIV6_HDMI,
@@ -391,6 +412,16 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
 				      fsib_parents, ARRAY_SIZE(fsib_parents), 6, 2),
 };
 
+/* DIV6 clocks */
+enum {
+	DIV6_SUB,
+	DIV6_NR
+};
+
+static struct clk div6_clks[DIV6_NR] = {
+	[DIV6_SUB]	= SH_CLK_DIV6(&pllc1_div2_clk, SUBCKCR, 0),
+};
+
 /* HDMI1/2 clock */
 static unsigned long hdmi12_recalc(struct clk *clk)
 {
@@ -456,35 +487,6 @@ static struct clk fsidivs[] = {
 
 /* MSTP */
 enum {
-	DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP,
-	DIV4_HPP, DIV4_USBP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP,
-	DIV4_NR
-};
-
-struct clk div4_clks[DIV4_NR] = {
-	[DIV4_I]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_ZG]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_B]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA,  8, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_M1]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA,  4, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_HP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRB,  4, 0x6fff, 0),
-	[DIV4_HPP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 20, 0x6fff, 0),
-	[DIV4_USBP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 16, 0x6fff, 0),
-	[DIV4_S]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 12, 0x6fff, 0),
-	[DIV4_ZB]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  8, 0x6fff, 0),
-	[DIV4_M3]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  4, 0x6fff, 0),
-	[DIV4_CP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  0, 0x6fff, 0),
-};
-
-enum {
-	DIV6_SUB,
-	DIV6_NR
-};
-
-static struct clk div6_clks[DIV6_NR] = {
-	[DIV6_SUB]	= SH_CLK_DIV6(&pllc1_div2_clk, SUBCKCR, 0),
-};
-
-enum {
 	MSTP128, MSTP127, MSTP125,
 	MSTP116, MSTP111, MSTP100, MSTP117,
 
-- 
1.7.10.4

[PATCH 19/30] ARM: shmobile: r8a7740: use fixed ratio clock

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Current clock-r8a7740 is using own implement
for each divX clocks.
This patch switches to use fixed ratio clock,
and was tesed on armadillo board.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7740.c |   54 ++++++--------------------------
 1 file changed, 9 insertions(+), 45 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index 161e128..c0d39aa 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <linux/sh_clk.h>
 #include <linux/clkdev.h>
+#include <mach/clock.h>
 #include <mach/common.h>
 #include <mach/r8a7740.h>
 
@@ -97,42 +98,13 @@ static struct clk dv_clk = {
 	.rate	= 27000000,
 };
 
-static unsigned long div_recalc(struct clk *clk)
-{
-	return clk->parent->rate / (int)(clk->priv);
-}
-
-static struct sh_clk_ops div_clk_ops = {
-	.recalc	= div_recalc,
-};
+SH_CLK_RATIO(div2,	1, 2);
+SH_CLK_RATIO(div1k,	1, 1024);
 
-/* extal1 / 2 */
-static struct clk extal1_div2_clk = {
-	.ops	= &div_clk_ops,
-	.priv	= (void *)2,
-	.parent	= &extal1_clk,
-};
-
-/* extal1 / 1024 */
-static struct clk extal1_div1024_clk = {
-	.ops	= &div_clk_ops,
-	.priv	= (void *)1024,
-	.parent	= &extal1_clk,
-};
-
-/* extal1 / 2 / 1024 */
-static struct clk extal1_div2048_clk = {
-	.ops	= &div_clk_ops,
-	.priv	= (void *)1024,
-	.parent	= &extal1_div2_clk,
-};
-
-/* extal2 / 2 */
-static struct clk extal2_div2_clk = {
-	.ops	= &div_clk_ops,
-	.priv	= (void *)2,
-	.parent	= &extal2_clk,
-};
+SH_FIXED_RATIO_CLK(extal1_div2_clk,	extal1_clk,		div2);
+SH_FIXED_RATIO_CLK(extal1_div1024_clk,	extal1_clk,		div1k);
+SH_FIXED_RATIO_CLK(extal1_div2048_clk,	extal1_div2_clk,	div1k);
+SH_FIXED_RATIO_CLK(extal2_div2_clk,	extal2_clk,		div2);
 
 static struct sh_clk_ops followparent_clk_ops = {
 	.recalc	= followparent_recalc,
@@ -143,11 +115,7 @@ static struct clk system_clk = {
 	.ops	= &followparent_clk_ops,
 };
 
-static struct clk system_div2_clk = {
-	.ops	= &div_clk_ops,
-	.priv	= (void *)2,
-	.parent	= &system_clk,
-};
+SH_FIXED_RATIO_CLK(system_div2_clk, system_clk,	div2);
 
 /* r_clk */
 static struct clk r_clk = {
@@ -184,11 +152,7 @@ static struct clk pllc1_clk = {
 };
 
 /* PLLC1 / 2 */
-static struct clk pllc1_div2_clk = {
-	.ops		= &div_clk_ops,
-	.priv		= (void *)2,
-	.parent		= &pllc1_clk,
-};
+SH_FIXED_RATIO_CLK(pllc1_div2_clk, pllc1_clk, div2);
 
 /* USB clock */
 /*
-- 
1.7.10.4

[PATCH 20/30] ARM: shmobile: r8a7779: remove DIV4 clocks and use fixed ratio clock

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

R-Car H1 has many clocks, and it is possible to read/use clock ratio
of these clocks from FRQMRx as DIV4 clocks.
But, these ratio are fixed value and these are decided
by MD pin status.
This means that we can use fixed ratio clock via MD pin status,
instead of DIV4 clocks.

This patch reads MD pin status, and sets PLLA clock (= root clock),
and used fixed ratio clock for other clocks.
It was tesed on marzen board.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7779.c |  196 ++++++++++++++++++--------------
 1 file changed, 109 insertions(+), 87 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index d9edeaf..7d86bfb 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -17,13 +17,17 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+#include <linux/bitops.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/sh_clk.h>
 #include <linux/clkdev.h>
+#include <mach/clock.h>
 #include <mach/common.h>
 
+#define MD(nr)	BIT(nr)
+
 #define FRQMR		IOMEM(0xffc80014)
 #define MSTPCR0		IOMEM(0xffc80030)
 #define MSTPCR1		IOMEM(0xffc80034)
@@ -36,6 +40,9 @@
 #define MSTPCR6		IOMEM(0xffc80058)
 #define MSTPCR7		IOMEM(0xffc80040)
 
+#define MODEMR		0xffcc0020
+
+
 /* ioremap() through clock mapping mandatory to avoid
  * collision with ARM coherent DMA virtual memory range.
  */
@@ -50,40 +57,39 @@ static struct clk_mapping cpg_mapping = {
  * from the platform code.
  */
 static struct clk plla_clk = {
-	.rate		= 1500000000,
+	/* .rate will be updated on r8a7779_clock_init() */
 	.mapping	= &cpg_mapping,
 };
 
+/*
+ * clock ratio of these clock will be updated
+ * on r8a7779_clock_init()
+ */
+SH_FIXED_RATIO_CLK_SET(clkz_clk,	plla_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(clkzs_clk,	plla_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(clki_clk,	plla_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(clks_clk,	plla_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(clks1_clk,	plla_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(clks3_clk,	plla_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(clks4_clk,	plla_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(clkb_clk,	plla_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(clkout_clk,	plla_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(clkp_clk,	plla_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(clkg_clk,	plla_clk, 1, 1);
+
 static struct clk *main_clks[] = {
 	&plla_clk,
-};
-
-static int divisors[] = { 0, 0, 0, 6, 8, 12, 16, 0, 24, 32, 36, 0, 0, 0, 0, 0 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
-	.divisors = divisors,
-	.nr_divisors = ARRAY_SIZE(divisors),
-};
-
-static struct clk_div4_table div4_table = {
-	.div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_S, DIV4_OUT, DIV4_S4, DIV4_S3, DIV4_S1, DIV4_P, DIV4_NR };
-
-static struct clk div4_clks[DIV4_NR] = {
-	[DIV4_S]	= SH_CLK_DIV4(&plla_clk, FRQMR, 20,
-				      0x0018, CLK_ENABLE_ON_INIT),
-	[DIV4_OUT]	= SH_CLK_DIV4(&plla_clk, FRQMR, 16,
-				      0x0700, CLK_ENABLE_ON_INIT),
-	[DIV4_S4]	= SH_CLK_DIV4(&plla_clk, FRQMR, 12,
-				      0x0040, CLK_ENABLE_ON_INIT),
-	[DIV4_S3]	= SH_CLK_DIV4(&plla_clk, FRQMR, 8,
-				      0x0010, CLK_ENABLE_ON_INIT),
-	[DIV4_S1]	= SH_CLK_DIV4(&plla_clk, FRQMR, 4,
-				      0x0060, CLK_ENABLE_ON_INIT),
-	[DIV4_P]	= SH_CLK_DIV4(&plla_clk, FRQMR, 0,
-				      0x0300, CLK_ENABLE_ON_INIT),
+	&clkz_clk,
+	&clkzs_clk,
+	&clki_clk,
+	&clks_clk,
+	&clks1_clk,
+	&clks3_clk,
+	&clks4_clk,
+	&clkb_clk,
+	&clkout_clk,
+	&clkp_clk,
+	&clkg_clk,
 };
 
 enum { MSTP323, MSTP322, MSTP321, MSTP320,
@@ -96,52 +102,28 @@ enum { MSTP323, MSTP322, MSTP321, MSTP320,
 	MSTP_NR };
 
 static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 23, 0), /* SDHI0 */
-	[MSTP322] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 22, 0), /* SDHI1 */
-	[MSTP321] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 21, 0), /* SDHI2 */
-	[MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 20, 0), /* SDHI3 */
-	[MSTP115] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 15, 0), /* SATA */
-	[MSTP103] = SH_CLK_MSTP32(&div4_clks[DIV4_S], MSTPCR1,  3, 0), /* DU */
-	[MSTP101] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1,  1, 0), /* USB2 */
-	[MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1,  0, 0), /* USB0/1 */
-	[MSTP030] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 30, 0), /* I2C0 */
-	[MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0), /* I2C1 */
-	[MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0), /* I2C2 */
-	[MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0), /* I2C3 */
-	[MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0), /* SCIF0 */
-	[MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0), /* SCIF1 */
-	[MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0), /* SCIF2 */
-	[MSTP023] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 23, 0), /* SCIF3 */
-	[MSTP022] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 22, 0), /* SCIF4 */
-	[MSTP021] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 21, 0), /* SCIF5 */
-	[MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0), /* TMU0 */
-	[MSTP015] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0), /* TMU1 */
-	[MSTP014] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 14, 0), /* TMU2 */
-	[MSTP007] = SH_CLK_MSTP32(&div4_clks[DIV4_S], MSTPCR0,  7, 0), /* HSPI */
-};
-
-static unsigned long mul4_recalc(struct clk *clk)
-{
-	return clk->parent->rate * 4;
-}
-
-static struct sh_clk_ops mul4_clk_ops = {
-	.recalc		= mul4_recalc,
-};
-
-struct clk clkz_clk = {
-	.ops		= &mul4_clk_ops,
-	.parent		= &div4_clks[DIV4_S],
-};
-
-struct clk clkzs_clk = {
-	/* clks x 4 / 4 = clks */
-	.parent		= &div4_clks[DIV4_S],
-};
-
-static struct clk *late_main_clks[] = {
-	&clkz_clk,
-	&clkzs_clk,
+	[MSTP323] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 23, 0), /* SDHI0 */
+	[MSTP322] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 22, 0), /* SDHI1 */
+	[MSTP321] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 21, 0), /* SDHI2 */
+	[MSTP320] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 20, 0), /* SDHI3 */
+	[MSTP115] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 15, 0), /* SATA */
+	[MSTP103] = SH_CLK_MSTP32(&clks_clk, MSTPCR1,  3, 0), /* DU */
+	[MSTP101] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1,  1, 0), /* USB2 */
+	[MSTP100] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1,  0, 0), /* USB0/1 */
+	[MSTP030] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 30, 0), /* I2C0 */
+	[MSTP029] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 29, 0), /* I2C1 */
+	[MSTP028] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 28, 0), /* I2C2 */
+	[MSTP027] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 27, 0), /* I2C3 */
+	[MSTP026] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 26, 0), /* SCIF0 */
+	[MSTP025] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 25, 0), /* SCIF1 */
+	[MSTP024] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 24, 0), /* SCIF2 */
+	[MSTP023] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 23, 0), /* SCIF3 */
+	[MSTP022] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 22, 0), /* SCIF4 */
+	[MSTP021] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 21, 0), /* SCIF5 */
+	[MSTP016] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 16, 0), /* TMU0 */
+	[MSTP015] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 15, 0), /* TMU1 */
+	[MSTP014] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 14, 0), /* TMU2 */
+	[MSTP007] = SH_CLK_MSTP32(&clks_clk, MSTPCR0,  7, 0), /* HSPI */
 };
 
 static struct clk_lookup lookups[] = {
@@ -151,12 +133,12 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("clkzs_clk", &clkzs_clk),
 
 	/* DIV4 clocks */
-	CLKDEV_CON_ID("shyway_clk",	&div4_clks[DIV4_S]),
-	CLKDEV_CON_ID("bus_clk",	&div4_clks[DIV4_OUT]),
-	CLKDEV_CON_ID("shyway4_clk",	&div4_clks[DIV4_S4]),
-	CLKDEV_CON_ID("shyway3_clk",	&div4_clks[DIV4_S3]),
-	CLKDEV_CON_ID("shyway1_clk",	&div4_clks[DIV4_S1]),
-	CLKDEV_CON_ID("peripheral_clk",	&div4_clks[DIV4_P]),
+	CLKDEV_CON_ID("shyway_clk",	&clks_clk),
+	CLKDEV_CON_ID("bus_clk",	&clkout_clk),
+	CLKDEV_CON_ID("shyway4_clk",	&clks4_clk),
+	CLKDEV_CON_ID("shyway3_clk",	&clks3_clk),
+	CLKDEV_CON_ID("shyway1_clk",	&clks1_clk),
+	CLKDEV_CON_ID("peripheral_clk",	&clkp_clk),
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("sata_rcar", &mstp_clks[MSTP115]), /* SATA */
@@ -190,20 +172,60 @@ static struct clk_lookup lookups[] = {
 
 void __init r8a7779_clock_init(void)
 {
+	void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
+	u32 mode;
 	int k, ret = 0;
 
+	BUG_ON(!modemr);
+	mode = ioread32(modemr);
+	iounmap(modemr);
+
+	if (mode & MD(1)) {
+		plla_clk.rate = 1500000000;
+
+		SH_CLK_SET_RATIO(&clkz_clk_ratio,	2, 3);
+		SH_CLK_SET_RATIO(&clkzs_clk_ratio,	1, 6);
+		SH_CLK_SET_RATIO(&clki_clk_ratio,	1, 2);
+		SH_CLK_SET_RATIO(&clks_clk_ratio,	1, 6);
+		SH_CLK_SET_RATIO(&clks1_clk_ratio,	1, 12);
+		SH_CLK_SET_RATIO(&clks3_clk_ratio,	1, 8);
+		SH_CLK_SET_RATIO(&clks4_clk_ratio,	1, 16);
+		SH_CLK_SET_RATIO(&clkp_clk_ratio,	1, 24);
+		SH_CLK_SET_RATIO(&clkg_clk_ratio,	1, 24);
+		if (mode & MD(2)) {
+			SH_CLK_SET_RATIO(&clkb_clk_ratio,	1, 36);
+			SH_CLK_SET_RATIO(&clkout_clk_ratio,	1, 36);
+		} else {
+			SH_CLK_SET_RATIO(&clkb_clk_ratio,	1, 24);
+			SH_CLK_SET_RATIO(&clkout_clk_ratio,	1, 24);
+		}
+	} else {
+		plla_clk.rate = 1600000000;
+
+		SH_CLK_SET_RATIO(&clkz_clk_ratio,	1, 2);
+		SH_CLK_SET_RATIO(&clkzs_clk_ratio,	1, 8);
+		SH_CLK_SET_RATIO(&clki_clk_ratio,	1, 2);
+		SH_CLK_SET_RATIO(&clks_clk_ratio,	1, 8);
+		SH_CLK_SET_RATIO(&clks1_clk_ratio,	1, 16);
+		SH_CLK_SET_RATIO(&clks3_clk_ratio,	1, 8);
+		SH_CLK_SET_RATIO(&clks4_clk_ratio,	1, 16);
+		SH_CLK_SET_RATIO(&clkp_clk_ratio,	1, 32);
+		SH_CLK_SET_RATIO(&clkg_clk_ratio,	1, 24);
+		if (mode & MD(2)) {
+			SH_CLK_SET_RATIO(&clkb_clk_ratio,	1, 32);
+			SH_CLK_SET_RATIO(&clkout_clk_ratio,	1, 32);
+		} else {
+			SH_CLK_SET_RATIO(&clkb_clk_ratio,	1, 24);
+			SH_CLK_SET_RATIO(&clkout_clk_ratio,	1, 24);
+		}
+	}
+
 	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
 		ret = clk_register(main_clks[k]);
 
 	if (!ret)
-		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
-	if (!ret)
 		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
 
-	for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
-		ret = clk_register(late_main_clks[k]);
-
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
-- 
1.7.10.4

[PATCH 21/30] ARM: shmobile: sh7372: move global functions to sh7372.h

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

There is no reason each CPU's own function has to exist in common.h.
sh7372_xxx() go to sh7372.h

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/common.h |   15 ---------------
 arch/arm/mach-shmobile/include/mach/sh7372.h |   12 ++++++++++++
 2 files changed, 12 insertions(+), 15 deletions(-)

diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 03f73de..d01a551 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -19,21 +19,6 @@ extern int shmobile_enter_wfi(struct cpuidle_device *dev,
 			      struct cpuidle_driver *drv, int index);
 extern void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv);
 
-extern void sh7372_init_irq(void);
-extern void sh7372_map_io(void);
-extern void sh7372_earlytimer_init(void);
-extern void sh7372_add_early_devices(void);
-extern void sh7372_add_standard_devices(void);
-extern void sh7372_add_early_devices_dt(void);
-extern void sh7372_add_standard_devices_dt(void);
-extern void sh7372_clock_init(void);
-extern void sh7372_pinmux_init(void);
-extern void sh7372_pm_init(void);
-extern void sh7372_resume_core_standby_sysc(void);
-extern int sh7372_do_idle_sysc(unsigned long sleep_mode);
-extern struct clk sh7372_extal1_clk;
-extern struct clk sh7372_extal2_clk;
-
 extern void sh73a0_init_delay(void);
 extern void sh73a0_init_irq(void);
 extern void sh73a0_init_irq_dt(void);
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
index b582fac..f0ea60d 100644
--- a/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -478,6 +478,18 @@ extern struct clk sh7372_dv_clki_clk;
 extern struct clk sh7372_dv_clki_div2_clk;
 extern struct clk sh7372_pllc2_clk;
 
+extern void sh7372_init_irq(void);
+extern void sh7372_map_io(void);
+extern void sh7372_earlytimer_init(void);
+extern void sh7372_add_early_devices(void);
+extern void sh7372_add_standard_devices(void);
+extern void sh7372_add_early_devices_dt(void);
+extern void sh7372_add_standard_devices_dt(void);
+extern void sh7372_clock_init(void);
+extern void sh7372_pinmux_init(void);
+extern void sh7372_pm_init(void);
+extern void sh7372_resume_core_standby_sysc(void);
+extern int  sh7372_do_idle_sysc(unsigned long sleep_mode);
 extern void sh7372_intcs_suspend(void);
 extern void sh7372_intcs_resume(void);
 extern void sh7372_intca_suspend(void);
-- 
1.7.10.4

[PATCH 22/30] ARM: shmobile: sh73a0: move global functions to sh73a0.h

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

There is no reason each CPU's own function has to exist in common.h.
sh73a0_xxx() go to sh73a0.h

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/common.h |   16 ----------------
 arch/arm/mach-shmobile/include/mach/sh73a0.h |   15 +++++++++++++++
 2 files changed, 15 insertions(+), 16 deletions(-)

diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index d01a551..48eeca9 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -19,22 +19,6 @@ extern int shmobile_enter_wfi(struct cpuidle_device *dev,
 			      struct cpuidle_driver *drv, int index);
 extern void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv);
 
-extern void sh73a0_init_delay(void);
-extern void sh73a0_init_irq(void);
-extern void sh73a0_init_irq_dt(void);
-extern void sh73a0_map_io(void);
-extern void sh73a0_earlytimer_init(void);
-extern void sh73a0_add_early_devices(void);
-extern void sh73a0_add_standard_devices(void);
-extern void sh73a0_add_standard_devices_dt(void);
-extern void sh73a0_clock_init(void);
-extern void sh73a0_pinmux_init(void);
-extern void sh73a0_pm_init(void);
-extern struct clk sh73a0_extal1_clk;
-extern struct clk sh73a0_extal2_clk;
-extern struct clk sh73a0_extcki_clk;
-extern struct clk sh73a0_extalr_clk;
-
 extern void r8a7740_meram_workaround(void);
 extern void r8a7740_init_irq(void);
 extern void r8a7740_map_io(void);
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index 606d31d..936da1b 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -557,6 +557,21 @@ enum {
 #define SH73A0_PINT0_IRQ(irq) ((irq) + 700)
 #define SH73A0_PINT1_IRQ(irq) ((irq) + 732)
 
+extern void sh73a0_init_delay(void);
+extern void sh73a0_init_irq(void);
+extern void sh73a0_init_irq_dt(void);
+extern void sh73a0_map_io(void);
+extern void sh73a0_earlytimer_init(void);
+extern void sh73a0_add_early_devices(void);
+extern void sh73a0_add_standard_devices(void);
+extern void sh73a0_add_standard_devices_dt(void);
+extern void sh73a0_clock_init(void);
+extern void sh73a0_pinmux_init(void);
+extern void sh73a0_pm_init(void);
+extern struct clk sh73a0_extal1_clk;
+extern struct clk sh73a0_extal2_clk;
+extern struct clk sh73a0_extcki_clk;
+extern struct clk sh73a0_extalr_clk;
 extern struct smp_operations sh73a0_smp_ops;
 
 #endif /* __ASM_SH73A0_H__ */
-- 
1.7.10.4

[PATCH 23/30] ARM: shmobile: r8a7740: move global functions to r8a7740.h

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

There is no reason each CPU's own function has to exist in common.h.
r8a7740_xxx() go to r8a7740.h

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/common.h  |    9 ---------
 arch/arm/mach-shmobile/include/mach/r8a7740.h |    9 +++++++++
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 48eeca9..4d5410d 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -19,15 +19,6 @@ extern int shmobile_enter_wfi(struct cpuidle_device *dev,
 			      struct cpuidle_driver *drv, int index);
 extern void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv);
 
-extern void r8a7740_meram_workaround(void);
-extern void r8a7740_init_irq(void);
-extern void r8a7740_map_io(void);
-extern void r8a7740_add_early_devices(void);
-extern void r8a7740_add_standard_devices(void);
-extern void r8a7740_clock_init(u8 md_ck);
-extern void r8a7740_pinmux_init(void);
-extern void r8a7740_pm_init(void);
-
 extern void r8a7779_init_delay(void);
 extern void r8a7779_init_irq(void);
 extern void r8a7779_init_irq_extpin(int irlm);
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h
index 59d252f..5a879bb 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7740.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h
@@ -606,6 +606,15 @@ enum {
 	SHDMA_SLAVE_USBHS_RX,
 };
 
+extern void r8a7740_meram_workaround(void);
+extern void r8a7740_init_irq(void);
+extern void r8a7740_map_io(void);
+extern void r8a7740_add_early_devices(void);
+extern void r8a7740_add_standard_devices(void);
+extern void r8a7740_clock_init(u8 md_ck);
+extern void r8a7740_pinmux_init(void);
+extern void r8a7740_pm_init(void);
+
 #ifdef CONFIG_PM
 extern void __init r8a7740_init_pm_domains(void);
 #else
-- 
1.7.10.4

[PATCH 24/30] ARM: shmobile: r8a7779: move global functions to r8a7779.h

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

There is no reason each CPU's own function has to exist in common.h.
r8a7779_xxx() go to r8a7779.h

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/common.h  |   14 --------------
 arch/arm/mach-shmobile/include/mach/r8a7779.h |   13 +++++++++++++
 2 files changed, 13 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 4d5410d..e002cfd 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -19,20 +19,6 @@ extern int shmobile_enter_wfi(struct cpuidle_device *dev,
 			      struct cpuidle_driver *drv, int index);
 extern void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv);
 
-extern void r8a7779_init_delay(void);
-extern void r8a7779_init_irq(void);
-extern void r8a7779_init_irq_extpin(int irlm);
-extern void r8a7779_init_irq_dt(void);
-extern void r8a7779_map_io(void);
-extern void r8a7779_earlytimer_init(void);
-extern void r8a7779_add_early_devices(void);
-extern void r8a7779_add_standard_devices(void);
-extern void r8a7779_add_standard_devices_dt(void);
-extern void r8a7779_clock_init(void);
-extern void r8a7779_pinmux_init(void);
-extern void r8a7779_pm_init(void);
-extern void r8a7779_register_twd(void);
-
 #ifdef CONFIG_SUSPEND
 int shmobile_suspend_init(void);
 #else
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h
index 8ab0cd6..af38750 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h
@@ -343,6 +343,19 @@ static inline struct r8a7779_pm_ch *to_r8a7779_ch(struct generic_pm_domain *d)
 	return &container_of(d, struct r8a7779_pm_domain, genpd)->ch;
 }
 
+extern void r8a7779_init_delay(void);
+extern void r8a7779_init_irq(void);
+extern void r8a7779_init_irq_extpin(int irlm);
+extern void r8a7779_init_irq_dt(void);
+extern void r8a7779_map_io(void);
+extern void r8a7779_earlytimer_init(void);
+extern void r8a7779_add_early_devices(void);
+extern void r8a7779_add_standard_devices(void);
+extern void r8a7779_add_standard_devices_dt(void);
+extern void r8a7779_clock_init(void);
+extern void r8a7779_pinmux_init(void);
+extern void r8a7779_pm_init(void);
+extern void r8a7779_register_twd(void);
 extern int r8a7779_sysc_power_down(struct r8a7779_pm_ch *r8a7779_ch);
 extern int r8a7779_sysc_power_up(struct r8a7779_pm_ch *r8a7779_ch);
 
-- 
1.7.10.4

[PATCH 25/30] ARM: shmobile: Initial r8a7790 SoC support

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Add initial support for the r8a7790 SoC including:
 - Single Cortex-A15 CPU Core
 - GIC
 - Architecture timer

No static virtual mappings are used, all the components
make use of ioremap(). DT_MACHINE_START is still wrapped
in CONFIG_USE_OF to match other mach-shmobile code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi                |   54 ++++++++++++++++++++++
 arch/arm/mach-shmobile/Kconfig                |    7 +++
 arch/arm/mach-shmobile/Makefile               |    1 +
 arch/arm/mach-shmobile/clock-r8a7790.c        |   61 +++++++++++++++++++++++++
 arch/arm/mach-shmobile/include/mach/r8a7790.h |    7 +++
 arch/arm/mach-shmobile/setup-r8a7790.c        |   51 +++++++++++++++++++++
 6 files changed, 181 insertions(+)
 create mode 100644 arch/arm/boot/dts/r8a7790.dtsi
 create mode 100644 arch/arm/mach-shmobile/clock-r8a7790.c
 create mode 100644 arch/arm/mach-shmobile/include/mach/r8a7790.h
 create mode 100644 arch/arm/mach-shmobile/setup-r8a7790.c

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
new file mode 100644
index 0000000..1c58ffb
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -0,0 +1,54 @@
+/*
+ * Device Tree Source for the r8a7790 SoC
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "renesas,r8a7790";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1300000000>;
+		};
+	};
+
+	gic: interrupt-controller at f1001000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0xf1001000 0x1000>,
+			<0xf1002000 0x1000>,
+			<0xf1004000 0x2000>,
+			<0xf1006000 0x2000>;
+		interrupts = <1 9 0xf04>;
+
+		gic-cpuif at 4 {
+			compatible = "arm,gic-cpuif";
+			cpuif-id = <4>;
+			cpu = <&cpu0>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+				<1 14 0xf08>,
+				<1 11 0xf08>,
+				<1 10 0xf08>;
+	};
+};
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index d569c34..749dfb4 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -51,6 +51,13 @@ config ARCH_R8A7779
 	select USB_ARCH_HAS_OHCI
 	select RENESAS_INTC_IRQPIN
 
+config ARCH_R8A7790
+	bool "R-Car H2 (R8A77900)"
+	select ARM_GIC
+	select CPU_V7
+	select ARM_ARCH_TIMER
+	select SH_CLK_CPG
+
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
 	select ARCH_WANT_OPTIONAL_GPIOLIB
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 2d42de4..709b9b4 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_ARCH_R8A73A4)	+= setup-r8a73a4.o clock-r8a73a4.o
 obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7778)	+= setup-r8a7778.o clock-r8a7778.o
 obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o
+obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o clock-r8a7790.o
 obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o clock-emev2.o
 
 # SMP objects
diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
new file mode 100644
index 0000000..6869798
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -0,0 +1,61 @@
+/*
+ * r8a7790 clock framework support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/sh_clk.h>
+#include <linux/clkdev.h>
+#include <mach/common.h>
+
+#define CPG_BASE 0xe6150000
+#define CPG_LEN 0x1000
+
+static struct clk_mapping cpg_mapping = {
+	.phys   = CPG_BASE,
+	.len    = CPG_LEN,
+};
+
+static struct clk *main_clks[] = {
+};
+
+enum { MSTP_NR };
+static struct clk mstp_clks[MSTP_NR] = {
+};
+
+static struct clk_lookup lookups[] = {
+};
+
+void __init r8a7790_clock_init(void)
+{
+	int k, ret = 0;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		shmobile_clk_init();
+	else
+		panic("failed to setup r8a7790 clocks\n");
+}
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h
new file mode 100644
index 0000000..f38ded6
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_R8A7790_H__
+#define __ASM_R8A7790_H__
+
+void r8a7790_add_standard_devices(void);
+void r8a7790_clock_init(void);
+
+#endif /* __ASM_R8A7790_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
new file mode 100644
index 0000000..af432ba
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -0,0 +1,51 @@
+/*
+ * r8a7790 processor support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/r8a7790.h>
+#include <asm/mach/arch.h>
+
+void __init r8a7790_add_standard_devices(void)
+{
+}
+
+#ifdef CONFIG_USE_OF
+void __init r8a7790_add_standard_devices_dt(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *r8a7790_boards_compat_dt[] __initdata = {
+	"renesas,r8a7790",
+	NULL,
+};
+
+DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
+	.init_irq	= irqchip_init,
+	.init_machine	= r8a7790_add_standard_devices_dt,
+	.init_time	= shmobile_timer_init,
+	.dt_compat	= r8a7790_boards_compat_dt,
+MACHINE_END
+#endif /* CONFIG_USE_OF */
-- 
1.7.10.4

[PATCH 26/30] ARM: shmobile: r8a7790 SCIF support

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Add SCIF serial port support to the r8a7790 SoC by
adding platform devices for SCIFA0 -> SCIFA2 as well
as SCIFB0 -> SCIFB2 and SCIF0 -> SCIF1 together with
clock bindings. DT device description is excluded at
this point since such bindings are still under
development.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7790.c |   34 +++++++++++++++++++-
 arch/arm/mach-shmobile/setup-r8a7790.c |   55 ++++++++++++++++++++++++++++++++
 2 files changed, 88 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 6869798..bad9bf2 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -27,19 +27,51 @@
 #define CPG_BASE 0xe6150000
 #define CPG_LEN 0x1000
 
+#define SMSTPCR2 0xe6150138
+#define SMSTPCR7 0xe615014c
+
 static struct clk_mapping cpg_mapping = {
 	.phys   = CPG_BASE,
 	.len    = CPG_LEN,
 };
 
+static struct clk p_clk = {
+	.rate	= 65000000, /* shortcut for now */
+	.mapping	= &cpg_mapping,
+};
+
+static struct clk mp_clk = {
+	.rate	= 52000000,  /* shortcut for now */
+	.mapping	= &cpg_mapping,
+};
+
 static struct clk *main_clks[] = {
+	&p_clk,
+	&mp_clk,
 };
 
-enum { MSTP_NR };
+enum { MSTP721, MSTP720,
+	MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP_NR };
 static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
+	[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
+	[MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
+	[MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
+	[MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
+	[MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
+	[MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
+	[MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
 };
 
 static struct clk_lookup lookups[] = {
+	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
+	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
+	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
+	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
+	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
+	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP202]),
+	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP721]),
+	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]),
 };
 
 void __init r8a7790_clock_init(void)
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index af432ba..3bb5bf1 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -22,13 +22,68 @@
 #include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
+#include <linux/serial_sci.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7790.h>
 #include <asm/mach/arch.h>
 
+#define SCIF_COMMON(scif_type, baseaddr, irq)			\
+	.type		= scif_type,				\
+	.mapbase	= baseaddr,				\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
+	.irqs		= SCIx_IRQ_MUXED(irq)
+
+#define SCIFA_DATA(index, baseaddr, irq)		\
+[index] = {						\
+	SCIF_COMMON(PORT_SCIFA, baseaddr, irq),		\
+	.scbrr_algo_id	= SCBRR_ALGO_4,			\
+	.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE0,	\
+}
+
+#define SCIFB_DATA(index, baseaddr, irq)	\
+[index] = {					\
+	SCIF_COMMON(PORT_SCIFB, baseaddr, irq),	\
+	.scbrr_algo_id	= SCBRR_ALGO_4,		\
+	.scscr = SCSCR_RE | SCSCR_TE,		\
+}
+
+#define SCIF_DATA(index, baseaddr, irq)		\
+[index] = {						\
+	SCIF_COMMON(PORT_SCIF, baseaddr, irq),		\
+	.scbrr_algo_id	= SCBRR_ALGO_2,			\
+	.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
+}
+
+enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1 };
+
+static const struct plat_sci_port scif[] = {
+	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
+	SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
+	SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
+	SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
+	SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
+	SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */
+	SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */
+	SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */
+};
+
+static inline void r8a7790_register_scif(int idx)
+{
+	platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
+				      sizeof(struct plat_sci_port));
+}
+
 void __init r8a7790_add_standard_devices(void)
 {
+	r8a7790_register_scif(SCIFA0);
+	r8a7790_register_scif(SCIFA1);
+	r8a7790_register_scif(SCIFB0);
+	r8a7790_register_scif(SCIFB1);
+	r8a7790_register_scif(SCIFB2);
+	r8a7790_register_scif(SCIFA2);
+	r8a7790_register_scif(SCIF0);
+	r8a7790_register_scif(SCIF1);
 }
 
 #ifdef CONFIG_USE_OF
-- 
1.7.10.4

[PATCH 27/30] ARM: shmobile: r8a7790 IRQC support

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Add IRQC interrupt controller support to r8a7790 by
hooking up a single IRQC instances to handle 4 external
IRQ signals. The IRQC controller is tied to SPIs of
the GIC. On r8a7790 the external IRQ pins routing is
handled by the PFC which is excluded from this patch.

Both platform devices and DT devices are added in this
patch. The platform device versions are used to provide
a static interrupt map configuration for board code
written in C.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi         |    9 +++++++++
 arch/arm/mach-shmobile/Kconfig         |    1 +
 arch/arm/mach-shmobile/setup-r8a7790.c |   21 +++++++++++++++++++++
 3 files changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 1c58ffb..a1e0e0c 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -51,4 +51,13 @@
 				<1 11 0xf08>,
 				<1 10 0xf08>;
 	};
+
+	irqc0: interrupt-controller at e61c0000 {
+		compatible = "renesas,irqc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe61c0000 0x200>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 0 4>, <0 1 4>, <0 2 4>,	<0 3 4>;
+	};
 };
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 749dfb4..ccaea6a 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -57,6 +57,7 @@ config ARCH_R8A7790
 	select CPU_V7
 	select ARM_ARCH_TIMER
 	select SH_CLK_CPG
+	select RENESAS_IRQC
 
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 3bb5bf1..9b4ccd7 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/serial_sci.h>
+#include <linux/platform_data/irq-renesas-irqc.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7790.h>
@@ -74,6 +75,25 @@ static inline void r8a7790_register_scif(int idx)
 				      sizeof(struct plat_sci_port));
 }
 
+static struct renesas_irqc_config irqc0_data = {
+	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
+};
+
+static struct resource irqc0_resources[] = {
+	DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
+	DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
+	DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
+	DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */
+	DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */
+};
+
+#define r8a7790_register_irqc(idx)					\
+	platform_device_register_resndata(&platform_bus, "renesas_irqc", \
+					  idx, irqc##idx##_resources,	\
+					  ARRAY_SIZE(irqc##idx##_resources), \
+					  &irqc##idx##_data,		\
+					  sizeof(struct renesas_irqc_config))
+
 void __init r8a7790_add_standard_devices(void)
 {
 	r8a7790_register_scif(SCIFA0);
@@ -84,6 +104,7 @@ void __init r8a7790_add_standard_devices(void)
 	r8a7790_register_scif(SCIFA2);
 	r8a7790_register_scif(SCIF0);
 	r8a7790_register_scif(SCIF1);
+	r8a7790_register_irqc(0);
 }
 
 #ifdef CONFIG_USE_OF
-- 
1.7.10.4

[PATCH 28/30] ARM: shmobile: r8a7790 PFC support

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Add a platform device for the r8a7790 PFC.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig                |    1 +
 arch/arm/mach-shmobile/include/mach/r8a7790.h |    1 +
 arch/arm/mach-shmobile/setup-r8a7790.c        |   10 ++++++++++
 3 files changed, 12 insertions(+)

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index ccaea6a..ff674c5 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -53,6 +53,7 @@ config ARCH_R8A7779
 
 config ARCH_R8A7790
 	bool "R-Car H2 (R8A77900)"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
 	select ARM_ARCH_TIMER
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h
index f38ded6..9bd6f5c 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7790.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h
@@ -3,5 +3,6 @@
 
 void r8a7790_add_standard_devices(void);
 void r8a7790_clock_init(void);
+void r8a7790_pinmux_init(void);
 
 #endif /* __ASM_R8A7790_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 9b4ccd7..481201a 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -29,6 +29,16 @@
 #include <mach/r8a7790.h>
 #include <asm/mach/arch.h>
 
+static const struct resource pfc_resources[] = {
+	DEFINE_RES_MEM(0xe6060000, 0x250),
+};
+
+void __init r8a7790_pinmux_init(void)
+{
+	platform_device_register_simple("pfc-r8a7790", -1, pfc_resources,
+					ARRAY_SIZE(pfc_resources));
+}
+
 #define SCIF_COMMON(scif_type, baseaddr, irq)			\
 	.type		= scif_type,				\
 	.mapbase	= baseaddr,				\
-- 
1.7.10.4

[PATCH 29/30] ARM: shmobile: r8a73a4 SoC 64-bit DT support

[Simon Horman]

From: Takashi Yoshii <takashi.yoshii.zj@renesas.com>

The r8a73a4 SoC supports LPAE and has memory window up to
0x2ffffffff. Convert to 64-bit addresses by enlarging
#addr-cells and #size-cells to 2.

Signed-off-by: Takashi Yoshii <takashi.yoshii.zj@renesas.com>
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a73a4.dtsi |   20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 7db5b50..fde2a33 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -9,11 +9,11 @@
  * kind, whether express or implied.
  */
 
-/include/ "skeleton.dtsi"
-
 / {
 	compatible = "renesas,r8a73a4";
 	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	cpus {
 		#address-cells = <1>;
@@ -32,10 +32,10 @@
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;
-		reg = <0xf1001000 0x1000>,
-			<0xf1002000 0x1000>,
-			<0xf1004000 0x2000>,
-			<0xf1006000 0x2000>;
+		reg = <0 0xf1001000 0 0x1000>,
+			<0 0xf1002000 0 0x1000>,
+			<0 0xf1004000 0 0x2000>,
+			<0 0xf1006000 0 0x2000>;
 		interrupts = <1 9 0xf04>;
 
 		gic-cpuif at 4 {
@@ -57,7 +57,7 @@
 		compatible = "renesas,irqc";
 		#interrupt-cells = <2>;
 		interrupt-controller;
-		reg = <0xe61c0000 0x200>;
+		reg = <0 0xe61c0000 0 0x200>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 0 4>, <0 1 4>, <0 2 4>,	<0 3 4>,
 				<0 4 4>, <0 5 4>, <0 6 4>, <0 7 4>,
@@ -73,7 +73,7 @@
 		compatible = "renesas,irqc";
 		#interrupt-cells = <2>;
 		interrupt-controller;
-		reg = <0xe61c0200 0x200>;
+		reg = <0 0xe61c0200 0 0x200>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 32 4>, <0 33 4>, <0 34 4>, <0 35 4>,
 				<0 36 4>, <0 37 4>, <0 38 4>, <0 39 4>,
@@ -86,8 +86,8 @@
 
 	thermal at e61f0000 {
 		compatible = "renesas,rcar-thermal";
-		reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>,
-			 <0xe61f0200 0x38>, <0xe61f0300 0x38>;
+		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
+			 <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 69 4>;
 	};
-- 
1.7.10.4

[PATCH 30/30] ARM: shmobile: r8a7790 SoC 64-bit DT support

[Simon Horman]

From: Takashi Yoshii <takashi.yoshii.zj@renesas.com>

The r8a7790 SoC supports LPAE and has memory window up to
0x2ffffffff. Convert to 64-bit addresses by enlarging
#addr-cells and #size-cells to 2.

Signed-off-by: Takashi Yoshii <takashi.yoshii.zj@renesas.com>
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index a1e0e0c..7a17110 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -8,11 +8,11 @@
  * kind, whether express or implied.
  */
 
-/include/ "skeleton.dtsi"
-
 / {
 	compatible = "renesas,r8a7790";
 	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	cpus {
 		#address-cells = <1>;
@@ -31,10 +31,10 @@
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;
-		reg = <0xf1001000 0x1000>,
-			<0xf1002000 0x1000>,
-			<0xf1004000 0x2000>,
-			<0xf1006000 0x2000>;
+		reg = <0 0xf1001000 0 0x1000>,
+			<0 0xf1002000 0 0x1000>,
+			<0 0xf1004000 0 0x2000>,
+			<0 0xf1006000 0 0x2000>;
 		interrupts = <1 9 0xf04>;
 
 		gic-cpuif at 4 {
@@ -56,7 +56,7 @@
 		compatible = "renesas,irqc";
 		#interrupt-cells = <2>;
 		interrupt-controller;
-		reg = <0xe61c0000 0x200>;
+		reg = <0 0xe61c0000 0 0x200>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 0 4>, <0 1 4>, <0 2 4>,	<0 3 4>;
 	};
-- 
1.7.10.4

[PATCH 16/30] ARM: shmobile: sh7372: use fixed ratio clock

[Sergei Shtylyov]

Hello.

On 02-04-2013 9:07, Simon Horman wrote:

> From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

> Current clock-sh7372 is using own implement
> for each divX clocks.
> This patch switches to use fixed ratio clock,
> and was tesed on mackerel board.
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> Acked-by: Magnus Damm <damm@opensource.se>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> ---
>   arch/arm/mach-shmobile/clock-sh7372.c |   44 ++++++---------------------------
>   1 file changed, 7 insertions(+), 37 deletions(-)

> diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
> index 6c23e3f..7e10593 100644
> --- a/arch/arm/mach-shmobile/clock-sh7372.c
> +++ b/arch/arm/mach-shmobile/clock-sh7372.c
[...]
> @@ -83,39 +84,12 @@ struct clk sh7372_extal2_clk = {
[...]
> +SH_FIXED_RATIO_CLKg(sh7372_dv_clki_div2_clk,	sh7372_dv_clki_clk,	div2);
> +SH_FIXED_RATIO_CLK(extal1_div2_clk,		sh7372_extal1_clk,	div2);
> +SH_FIXED_RATIO_CLK(extal2_div2_clk,		sh7372_extal2_clk,	div2);
> +SH_FIXED_RATIO_CLK(extal2_div4_clk,		extal2_div2_clk,	div2);

    Note that SH_FIXED_RATIO_CLK() definition already includes ; -- it 
probably should be removed from there.

WBR, Sergei

[PATCH 16/30] ARM: shmobile: sh7372: use fixed ratio clock

[Arnd Bergmann]

On Tuesday 02 April 2013, Sergei Shtylyov wrote:
> > @@ -83,39 +84,12 @@ struct clk sh7372_extal2_clk = {
> [...]
> > +SH_FIXED_RATIO_CLKg(sh7372_dv_clki_div2_clk, sh7372_dv_clki_clk,     div2);
> > +SH_FIXED_RATIO_CLK(extal1_div2_clk,          sh7372_extal1_clk,      div2);
> > +SH_FIXED_RATIO_CLK(extal2_div2_clk,          sh7372_extal2_clk,      div2);
> > +SH_FIXED_RATIO_CLK(extal2_div4_clk,          extal2_div2_clk,        div2);
> 
>     Note that SH_FIXED_RATIO_CLK() definition already includes ; -- it 
> probably should be removed from there.

Most macros that we have in the kernel like this don't include the semicolon,
which seems better since it is harder to misuse (the compiler will complain
about a missing semicolon but not always about an extranous one) and gives
a more consistent syntax overall.

It's probably not worth changing it now for the shmobile clock code, since
that is getting changed over to common clock in the future, but you may
want to remember this for future macro definitions.

	Arnd

[GIT PULL] Renesas ARM SoC updates for v3.10 #2

[Olof Johansson]

On Tue, Apr 02, 2013 at 02:06:56PM +0900, Simon Horman wrote:
> Hi Arnd, Hi Olof,
> 
> The following changes since commit 4c82e452732784419fd616cf1acf2bc9b004aae1:
> 
>   Merge tag 'renesas-intc-external-irq2-for-v3.10' into soc-base (2013-04-02 10:55:57 +0900)
> 
> are available in the git repository at:
> 
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc2-for-v3.10
> 
> for you to fetch changes up to 8585deb18580d04209a2986430aa0959ef38fce2:
> 
>   ARM: shmobile: r8a7790 SoC 64-bit DT support (2013-04-02 11:02:21 +0900)
> 
> ----------------------------------------------------------------
> Second round of Renesas ARM SoC updates for v3.10
> 
> Some Highlights:
> 
> * Add r8a7790 SoC
> * Add r8a73a4 SoC
> * Migrate r8a7740 SoC from INTC to GIC
> * Add thermal driver support to r8a73a4 SoC
> * Add irqpin DT nodes to sh73a0 SoC
> * Add SCIF support to r8a7778 SoC
> 
> This pull request is based on a merge of:
> git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-soc-for-v3.10
> git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-intc-external-irq2-for-v3.10

Ugh. So, the irq branch depends on the old soc branch, and now this depends on
the irq branch (and it is soc code). That's a circular dependency.

I'll add this as a next/soc2 branch in arm-soc, but please think about these
kind of circular dependencies in the future, and try to avoid them if you can
by splitting the branch contents in separate topics if possible.

Likewise, there's a bunch of patches in this branch such as the fixed divisor
clock patches that could be considered cleanup. Not a big deal to group them
with the soc code, but if you're already doing cleanup branches it'd be just as
well to put them in those.


-Olof

[GIT PULL] Renesas ARM SoC updates for v3.10 #2

[Simon Horman]

On Tue, Apr 02, 2013 at 01:25:03PM -0700, Olof Johansson wrote:
> On Tue, Apr 02, 2013 at 02:06:56PM +0900, Simon Horman wrote:
> > Hi Arnd, Hi Olof,
> > 
> > The following changes since commit 4c82e452732784419fd616cf1acf2bc9b004aae1:
> > 
> >   Merge tag 'renesas-intc-external-irq2-for-v3.10' into soc-base (2013-04-02 10:55:57 +0900)
> > 
> > are available in the git repository at:
> > 
> > 
> >   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc2-for-v3.10
> > 
> > for you to fetch changes up to 8585deb18580d04209a2986430aa0959ef38fce2:
> > 
> >   ARM: shmobile: r8a7790 SoC 64-bit DT support (2013-04-02 11:02:21 +0900)
> > 
> > ----------------------------------------------------------------
> > Second round of Renesas ARM SoC updates for v3.10
> > 
> > Some Highlights:
> > 
> > * Add r8a7790 SoC
> > * Add r8a73a4 SoC
> > * Migrate r8a7740 SoC from INTC to GIC
> > * Add thermal driver support to r8a73a4 SoC
> > * Add irqpin DT nodes to sh73a0 SoC
> > * Add SCIF support to r8a7778 SoC
> > 
> > This pull request is based on a merge of:
> > git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-soc-for-v3.10
> > git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas renesas-intc-external-irq2-for-v3.10
> 
> Ugh. So, the irq branch depends on the old soc branch, and now this depends on
> the irq branch (and it is soc code). That's a circular dependency.
>
> I'll add this as a next/soc2 branch in arm-soc, but please think about these
> kind of circular dependencies in the future, and try to avoid them if you can
> by splitting the branch contents in separate topics if possible.

Sorry about that. I have been having a bit of trouble managing the
dependencies and some assumptions I made with earlier branches
turned out to be invalid as new patches came in. I'll try to be
more careful in future.

> Likewise, there's a bunch of patches in this branch such as the fixed
> divisor clock patches that could be considered cleanup. Not a big deal to
> group them with the soc code, but if you're already doing cleanup
> branches it'd be just as well to put them in those.

I'm not carrying any cleanup branches at this time.
I will keep in in mind for future patches of this nature.