From: cdall@cs.columbia.edu (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 08/32] arm64: KVM: architecture specific MMU backend
Date: Tue, 23 Apr 2013 15:58:16 -0700 [thread overview]
Message-ID: <20130423225816.GC20569@gmail.com> (raw)
In-Reply-To: <1365437854-30214-9-git-send-email-marc.zyngier@arm.com>
On Mon, Apr 08, 2013 at 05:17:10PM +0100, Marc Zyngier wrote:
> Define the arm64 specific MMU backend:
> - HYP/kernel VA offset
> - S2 4/64kB definitions
> - S2 page table populating and flushing
> - icache cleaning
>
> Reviewed-by: Christopher Covington <cov@codeaurora.org>
> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
> ---
> arch/arm64/include/asm/kvm_mmu.h | 136 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 136 insertions(+)
> create mode 100644 arch/arm64/include/asm/kvm_mmu.h
>
> diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
> new file mode 100644
> index 0000000..2eb2230
> --- /dev/null
> +++ b/arch/arm64/include/asm/kvm_mmu.h
> @@ -0,0 +1,136 @@
> +/*
> + * Copyright (C) 2012,2013 - ARM Ltd
> + * Author: Marc Zyngier <marc.zyngier@arm.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __ARM64_KVM_MMU_H__
> +#define __ARM64_KVM_MMU_H__
> +
> +#include <asm/page.h>
> +#include <asm/memory.h>
> +
> +/*
> + * As we only have the TTBR0_EL2 register, we cannot express
> + * "negative" addresses. This makes it impossible to directly share
> + * mappings with the kernel.
> + *
> + * Instead, give the HYP mode its own VA region at a fixed offset from
> + * the kernel by just masking the top bits (which are all ones for a
> + * kernel address).
For some reason I keep choking on this, despite it being very simple.
We're just defining a different PAGE_OFFSET, right? Why not do a hard
define as:
#define HYP_PAGE_OFFSET_MASK 0x0000ffffffffffff
#define HYP_PAGE_OFFSET 0x0000ffc000000000
...or change the second paragraph of the comment to say
that we definethe HYP_PAGE_OFFSET to be 0x 0000ffc0 00000000.
> + */
> +#define HYP_PAGE_OFFSET_SHIFT VA_BITS
> +#define HYP_PAGE_OFFSET_MASK ((UL(1) << HYP_PAGE_OFFSET_SHIFT) - 1)
In any case, is there a reason for the HYP_PAGE_OFFSET_SHIFT
indirection? It may be simpler without...
> +#define HYP_PAGE_OFFSET (PAGE_OFFSET & HYP_PAGE_OFFSET_MASK)
> +
> +/*
> + * Our virtual mapping for the idmap-ed MMU-enable code. Must be
> + * shared across all the page-tables. Conveniently, we use the last
> + * possible page, where no kernel mapping will ever exist.
> + */
> +#define TRAMPOLINE_VA (HYP_PAGE_OFFSET_MASK & PAGE_MASK)
hmmm, ok, here it's kind of nice to have that define correlation, so
maybe it's not cleaner. Something should be improved here in the define
or the comment to make it more clear. Perhaps just adding the real
constants in the comment or in Documentation/arm64/memory.txt would
help.
> +
> +#ifdef __ASSEMBLY__
> +
> +/*
> + * Convert a kernel VA into a HYP VA.
> + * reg: VA to be converted.
> + */
> +.macro kern_hyp_va reg
> + and \reg, \reg, #HYP_PAGE_OFFSET_MASK
> +.endm
> +
> +#else
> +
> +#include <asm/cacheflush.h>
> +
> +#define KERN_TO_HYP(kva) ((unsigned long)kva - PAGE_OFFSET + HYP_PAGE_OFFSET)
> +
> +/*
> + * Align KVM with the kernel's view of physical memory. Should be
> + * 40bit IPA, with PGD being 8kB aligned.
> + */
> +#define KVM_PHYS_SHIFT PHYS_MASK_SHIFT
> +#define KVM_PHYS_SIZE (1UL << KVM_PHYS_SHIFT)
> +#define KVM_PHYS_MASK (KVM_PHYS_SIZE - 1UL)
> +
> +#ifdef CONFIG_ARM64_64K_PAGES
> +#define PAGE_LEVELS 2
> +#define BITS_PER_LEVEL 13
> +#else /* 4kB pages */
> +#define PAGE_LEVELS 3
> +#define BITS_PER_LEVEL 9
> +#endif
What are the semantics of these defines exactly? They should be
S2_PAGE_LEVELS and make some assumptions of the VTCR_EL2.SL0 field
right?
> +
> +/* Make sure we get the right size, and thus the right alignment */
this comment is not particularly helpful, something explaining why the
max() thingy below makes sense would be more so :) I really can't
follow the BITS_PER_S2_PGD and PTRS_PER_S2_PGD defines.
> +#define BITS_PER_S2_PGD (KVM_PHYS_SHIFT - (PAGE_LEVELS - 1) * BITS_PER_LEVEL - PAGE_SHIFT)
> +#define PTRS_PER_S2_PGD (1 << max(BITS_PER_LEVEL, BITS_PER_S2_PGD))
> +#define S2_PGD_ORDER get_order(PTRS_PER_S2_PGD * sizeof(pgd_t))
> +#define S2_PGD_SIZE (1 << S2_PGD_ORDER)
> +
> +int create_hyp_mappings(void *from, void *to);
> +int create_hyp_io_mappings(void *from, void *to, phys_addr_t);
> +void free_hyp_pgds(void);
> +
> +int kvm_alloc_stage2_pgd(struct kvm *kvm);
> +void kvm_free_stage2_pgd(struct kvm *kvm);
> +int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa,
> + phys_addr_t pa, unsigned long size);
> +
> +int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run);
> +
> +void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu);
> +
> +phys_addr_t kvm_mmu_get_httbr(void);
> +phys_addr_t kvm_mmu_get_boot_httbr(void);
> +phys_addr_t kvm_get_idmap_vector(void);
> +int kvm_mmu_init(void);
> +void kvm_clear_hyp_idmap(void);
> +
> +#define kvm_set_pte(ptep, pte) set_pte(ptep, pte)
I noticed that this doesn't do any cache cleaning. Are the MMU page
table walks guaranteed to be coherent with the MMU on arm64?
> +
> +static inline bool kvm_is_write_fault(unsigned long esr)
> +{
> + unsigned long esr_ec = esr >> ESR_EL2_EC_SHIFT;
> +
> + if (esr_ec == ESR_EL2_EC_IABT)
> + return false;
> +
> + if ((esr & ESR_EL2_ISV) && !(esr & ESR_EL2_WNR))
> + return false;
> +
> + return true;
> +}
> +
> +static inline void kvm_clean_pgd(pgd_t *pgd) {}
> +static inline void kvm_clean_pmd_entry(pmd_t *pmd) {}
> +static inline void kvm_clean_pte(pte_t *pte) {}
> +
> +static inline void kvm_set_s2pte_writable(pte_t *pte)
> +{
> + pte_val(*pte) |= PTE_S2_RDWR;
> +}
> +
> +struct kvm;
> +
> +static inline void coherent_icache_guest_page(struct kvm *kvm, gfn_t gfn)
> +{
> + unsigned long hva = gfn_to_hva(kvm, gfn);
> + flush_icache_range(hva, hva + PAGE_SIZE);
> +}
> +
> +#define kvm_flush_dcache_to_poc(a,l) __flush_dcache_area((a), (l))
> +
> +#endif /* __ASSEMBLY__ */
> +#endif /* __ARM64_KVM_MMU_H__ */
> --
> 1.8.1.4
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-04-23 22:58 UTC|newest]
Thread overview: 116+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-08 16:17 [PATCH v3 00/32] Port of KVM to arm64 Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 01/32] arm64: add explicit symbols to ESR_EL1 decoding Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 02/32] arm64: KVM: define HYP and Stage-2 translation page flags Marc Zyngier
2013-04-10 14:07 ` Will Deacon
2013-04-12 15:22 ` Marc Zyngier
2013-04-26 17:01 ` Catalin Marinas
2013-04-26 17:11 ` Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 03/32] arm64: KVM: HYP mode idmap support Marc Zyngier
2013-04-23 22:57 ` Christoffer Dall
2013-04-24 9:36 ` Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 04/32] arm64: KVM: EL2 register definitions Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 05/32] arm64: KVM: system register definitions for 64bit guests Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 06/32] arm64: KVM: Basic ESR_EL2 helpers and vcpu register access Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 07/32] arm64: KVM: fault injection into a guest Marc Zyngier
2013-04-10 16:40 ` Will Deacon
2013-04-12 15:29 ` Marc Zyngier
2013-04-23 22:57 ` Christoffer Dall
2013-04-24 10:04 ` Marc Zyngier
2013-04-24 16:46 ` Christoffer Dall
2013-04-29 16:26 ` Catalin Marinas
2013-05-07 16:29 ` Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 08/32] arm64: KVM: architecture specific MMU backend Marc Zyngier
2013-04-23 22:58 ` Christoffer Dall [this message]
2013-04-24 11:03 ` Marc Zyngier
2013-04-24 11:10 ` Will Deacon
2013-04-24 16:50 ` Christoffer Dall
2013-04-24 16:55 ` Christoffer Dall
2013-04-25 12:59 ` Marc Zyngier
2013-04-25 15:13 ` Christoffer Dall
2013-04-29 17:35 ` Catalin Marinas
2013-04-30 10:23 ` Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 09/32] arm64: KVM: user space interface Marc Zyngier
2013-04-10 16:45 ` Will Deacon
2013-04-12 15:31 ` Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 10/32] arm64: KVM: system register handling Marc Zyngier
2013-04-10 17:04 ` Will Deacon
2013-04-12 15:48 ` Marc Zyngier
2013-04-23 23:01 ` Christoffer Dall
2013-04-24 13:37 ` Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 11/32] arm64: KVM: CPU specific system registers handling Marc Zyngier
2013-04-10 17:06 ` Will Deacon
2013-04-12 16:04 ` Marc Zyngier
2013-04-23 22:59 ` Christoffer Dall
2013-04-24 9:33 ` Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 12/32] arm64: KVM: virtual CPU reset Marc Zyngier
2013-04-10 17:07 ` Will Deacon
2013-04-12 16:04 ` Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 13/32] arm64: KVM: kvm_arch and kvm_vcpu_arch definitions Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 14/32] arm64: KVM: MMIO access backend Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 15/32] arm64: KVM: guest one-reg interface Marc Zyngier
2013-04-10 17:13 ` Will Deacon
2013-04-12 16:35 ` Marc Zyngier
2013-04-23 22:59 ` Christoffer Dall
2013-04-24 11:27 ` Marc Zyngier
2013-04-24 17:05 ` Christoffer Dall
2013-04-08 16:17 ` [PATCH v3 16/32] arm64: KVM: hypervisor initialization code Marc Zyngier
2013-05-02 11:03 ` Catalin Marinas
2013-05-02 13:28 ` Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 17/32] arm64: KVM: HYP mode world switch implementation Marc Zyngier
2013-04-23 22:59 ` Christoffer Dall
2013-04-24 11:39 ` Marc Zyngier
2013-04-24 17:08 ` Christoffer Dall
2013-04-08 16:17 ` [PATCH v3 18/32] arm64: KVM: Exit handling Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 19/32] arm64: KVM: Plug the VGIC Marc Zyngier
2013-04-23 23:00 ` Christoffer Dall
2013-04-24 11:43 ` Marc Zyngier
2013-05-02 14:38 ` Catalin Marinas
2013-04-08 16:17 ` [PATCH v3 20/32] arm64: KVM: Plug the arch timer Marc Zyngier
2013-04-23 23:00 ` Christoffer Dall
2013-04-24 11:43 ` Marc Zyngier
2013-05-02 15:31 ` Catalin Marinas
2013-04-08 16:17 ` [PATCH v3 21/32] arm64: KVM: PSCI implementation Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 22/32] arm64: KVM: Build system integration Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 23/32] arm64: KVM: define 32bit specific registers Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 24/32] arm64: KVM: 32bit GP register access Marc Zyngier
2013-04-23 23:00 ` Christoffer Dall
2013-04-24 13:06 ` Marc Zyngier
2013-04-24 17:09 ` Christoffer Dall
2013-05-02 16:09 ` Catalin Marinas
2013-05-07 16:28 ` Marc Zyngier
2013-05-07 16:33 ` Catalin Marinas
2013-05-11 0:36 ` Christoffer Dall
2013-05-11 7:51 ` Peter Maydell
2013-05-11 9:43 ` Catalin Marinas
2013-05-12 18:51 ` Christoffer Dall
2013-04-08 16:17 ` [PATCH v3 25/32] arm64: KVM: 32bit conditional execution emulation Marc Zyngier
2013-04-23 23:00 ` Christoffer Dall
2013-04-24 13:13 ` Marc Zyngier
2013-04-24 17:11 ` Christoffer Dall
2013-04-08 16:17 ` [PATCH v3 26/32] arm64: KVM: 32bit handling of coprocessor traps Marc Zyngier
2013-04-23 23:01 ` Christoffer Dall
2013-04-24 13:42 ` Marc Zyngier
2013-04-24 17:14 ` Christoffer Dall
2013-04-08 16:17 ` [PATCH v3 27/32] arm64: KVM: CPU specific 32bit coprocessor access Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 28/32] arm64: KVM: 32bit specific register world switch Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 29/32] arm64: KVM: 32bit guest fault injection Marc Zyngier
2013-04-23 23:02 ` Christoffer Dall
2013-04-24 13:46 ` Marc Zyngier
2013-04-24 17:15 ` Christoffer Dall
2013-04-08 16:17 ` [PATCH v3 30/32] arm64: KVM: enable initialization of a 32bit vcpu Marc Zyngier
2013-04-23 23:02 ` Christoffer Dall
2013-04-24 13:49 ` Marc Zyngier
2013-04-24 17:17 ` Christoffer Dall
2013-05-07 16:36 ` Marc Zyngier
2013-05-11 0:38 ` Christoffer Dall
2013-05-11 8:04 ` Peter Maydell
2013-05-11 16:26 ` Christoffer Dall
2013-05-11 16:31 ` Peter Maydell
2013-05-13 9:01 ` Marc Zyngier
2013-05-13 15:46 ` Christoffer Dall
2013-04-08 16:17 ` [PATCH v3 31/32] arm64: KVM: userspace API documentation Marc Zyngier
2013-04-23 23:02 ` Christoffer Dall
2013-04-24 13:52 ` Marc Zyngier
2013-04-08 16:17 ` [PATCH v3 32/32] arm64: KVM: MAINTAINERS update Marc Zyngier
2013-04-23 23:04 ` [PATCH v3 00/32] Port of KVM to arm64 Christoffer Dall
2013-05-03 13:17 ` Catalin Marinas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130423225816.GC20569@gmail.com \
--to=cdall@cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).