[PATCH 5/5] ARM: dts: add SPI/NOR for mx6q{dl}-sabreauto boards

[s.hauer@pengutronix.de (Sascha Hauer)]

On Thu, May 09, 2013 at 11:29:03AM +0800, Huang Shijie wrote:
> Since the SPI/NOR has pin conflict with the WEIM NOR,
> we disable the spi/nor by default.
> 
> Signed-off-by: Huang Shijie <b32955@freescale.com>
> ---
>  arch/arm/boot/dts/imx6qdl-sabreauto.dtsi |   32 ++++++++++++++++++++++++++++++
>  1 files changed, 32 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> index 7b561fb..b6b9e56 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> @@ -16,6 +16,38 @@
>  	};
>  };
>  
> +&ecspi1 {
> +	fsl,spi-num-chipselects = <1>;
> +	cs-gpios = <&gpio3 19 0>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi1_1>;
> +	status = "disabled";
> +
> +	flash: m25p80 at 0 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "st,m25p32";
> +		spi-max-frequency = <20000000>;
> +		reg = <0>;
> +
> +		partition at 0 {
> +			label = "U-Boot";
> +			reg = <0x0 0x40000>;
> +		};
> +
> +		partition at 40000 {
> +			label = "U-Boot-ENV";
> +			reg = <0x40000 0x10000>;
> +			read-only;
> +		};
> +
> +		partition at 50000 {
> +			label = "Kernel";
> +			reg = <0x50000 0x3b0000>;
> +		};

I really object to enforcing partition layouts in the devicetree. That's
clearly usecase specific and should be filled by the bootloader. Having
no partitions normally is not harmful, but having the wrong layout just
because we start a mainline devicetree really can be harmful.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |