From: plagnioj@jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/5 v2] ARM: at91: dt: switch to pre-processor
Date: Fri, 17 May 2013 14:38:07 +0200 [thread overview]
Message-ID: <20130517123807.GA16804@game.jcrosoft.org> (raw)
In-Reply-To: <5195EA33.4010400@atmel.com>
On 10:28 Fri 17 May , Nicolas Ferre wrote:
> On 15/05/2013 16:19, Jean-Christophe PLAGNIOL-VILLARD :
> >HI,
> >
> > v2:
> > use common IRQ define
> > split patch
> > rebase on 3.10-rc1
> >
> > The follow patch series switch the at91 to DT pre-processor
> >
> > So we can use macro for AIC and Pinctrl instead of magic
>
> Hi, this is very good for me: nice to use the common GPIO and IRQ
> defines. It increases readability a lot!
and avoid typo when adding pinctrl
>
> So, it seems natural to push this series through arm-soc. It would
> be integrated early in a "cleanup" branch for 3.11.
> We also would like to make it a prerequisite for all AT91 material
> that are touching the changed files, targeted for 3.11.
agreed
>
> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Best Regards,
J.
>
> Thanks, best regards.
>
> >The following changes since commit f722406faae2d073cc1d01063d1123c35425939e:
> >
> > Linux 3.10-rc1 (2013-05-11 17:14:08 -0700)
> >
> >are available in the git repository at:
> >
> > git://github.com/at91linux/linux-at91.git j/for-3.11-dt
> >
> >for you to fetch changes up to 3668ac6a70bc5af71a947ad7b531c57b8a787ea0:
> >
> > ARM: at91: dt: switch to standard IRQ flag defines (2013-05-15 21:56:18 +0800)
> >
> >----------------------------------------------------------------
> >Jean-Christophe PLAGNIOL-VILLARD (5):
> > ARM: at91: dt: use #include for all device trees
> > ARM: at91: dt: switch to standard GPIO flag defines.
> > ARM: at91: dt: add pinctrl pre-processor define
> > ARM: at91: dt: switch to pinctrl to pre-processor
> > ARM: at91: dt: switch to standard IRQ flag defines
> >
> > arch/arm/boot/dts/aks-cdu.dts | 12 +--
> > arch/arm/boot/dts/animeo_ip.dts | 18 ++---
> > arch/arm/boot/dts/at91-ariag25.dts | 6 +-
> > arch/arm/boot/dts/at91rm9200.dtsi | 207 +++++++++++++++++++++++++------------------------
> > arch/arm/boot/dts/at91rm9200ek.dts | 10 +--
> > arch/arm/boot/dts/at91sam9260.dtsi | 215 ++++++++++++++++++++++++++-------------------------
> > arch/arm/boot/dts/at91sam9263.dtsi | 203 ++++++++++++++++++++++++------------------------
> > arch/arm/boot/dts/at91sam9263ek.dts | 24 +++---
> > arch/arm/boot/dts/at91sam9g15.dtsi | 2 +-
> > arch/arm/boot/dts/at91sam9g15ek.dts | 4 +-
> > arch/arm/boot/dts/at91sam9g20.dtsi | 2 +-
> > arch/arm/boot/dts/at91sam9g20ek.dts | 6 +-
> > arch/arm/boot/dts/at91sam9g20ek_2mmc.dts | 10 +--
> > arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 28 ++++---
> > arch/arm/boot/dts/at91sam9g25.dtsi | 2 +-
> > arch/arm/boot/dts/at91sam9g25ek.dts | 4 +-
> > arch/arm/boot/dts/at91sam9g35.dtsi | 2 +-
> > arch/arm/boot/dts/at91sam9g35ek.dts | 4 +-
> > arch/arm/boot/dts/at91sam9g45.dtsi | 213 +++++++++++++++++++++++++-------------------------
> > arch/arm/boot/dts/at91sam9m10g45ek.dts | 38 ++++-----
> > arch/arm/boot/dts/at91sam9n12.dtsi | 141 +++++++++++++++++-----------------
> > arch/arm/boot/dts/at91sam9n12ek.dts | 14 ++--
> > arch/arm/boot/dts/at91sam9x25.dtsi | 22 +++---
> > arch/arm/boot/dts/at91sam9x25ek.dts | 4 +-
> > arch/arm/boot/dts/at91sam9x35.dtsi | 2 +-
> > arch/arm/boot/dts/at91sam9x35ek.dts | 4 +-
> > arch/arm/boot/dts/at91sam9x5.dtsi | 279 +++++++++++++++++++++++++++++++++---------------------------------
> > arch/arm/boot/dts/at91sam9x5cm.dtsi | 8 +-
> > arch/arm/boot/dts/at91sam9x5ek.dtsi | 14 ++--
> > arch/arm/boot/dts/ethernut5.dts | 6 +-
> > arch/arm/boot/dts/evk-pro3.dts | 6 +-
> > arch/arm/boot/dts/ge863-pro3.dtsi | 2 +-
> > arch/arm/boot/dts/kizbox.dts | 16 ++--
> > arch/arm/boot/dts/mpa1600.dts | 4 +-
> > arch/arm/boot/dts/pm9g45.dts | 22 +++---
> > arch/arm/boot/dts/sama5d3.dtsi | 520 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------------------------------------------------
> > arch/arm/boot/dts/sama5d31ek.dts | 6 +-
> > arch/arm/boot/dts/sama5d33ek.dts | 4 +-
> > arch/arm/boot/dts/sama5d34ek.dts | 6 +-
> > arch/arm/boot/dts/sama5d35ek.dts | 4 +-
> > arch/arm/boot/dts/sama5d3xcm.dtsi | 4 +-
> > arch/arm/boot/dts/sama5d3xdm.dtsi | 2 +-
> > arch/arm/boot/dts/sama5d3xmb.dtsi | 26 +++----
> > arch/arm/boot/dts/tny_a9260.dts | 4 +-
> > arch/arm/boot/dts/tny_a9263.dts | 4 +-
> > arch/arm/boot/dts/tny_a9g20.dts | 4 +-
> > arch/arm/boot/dts/usb_a9260.dts | 4 +-
> > arch/arm/boot/dts/usb_a9260_common.dtsi | 6 +-
> > arch/arm/boot/dts/usb_a9263.dts | 8 +-
> > arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi | 22 +++---
> > arch/arm/boot/dts/usb_a9g20.dts | 4 +-
> > include/dt-bindings/pinctrl/at91.h | 35 +++++++++
> > 52 files changed, 1139 insertions(+), 1078 deletions(-)
> > create mode 100644 include/dt-bindings/pinctrl/at91.h
> >
> >Best Regards,
> >J.
> >
> >
>
>
> --
> Nicolas Ferre
prev parent reply other threads:[~2013-05-17 12:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-15 14:19 [PATCH 0/5 v2] ARM: at91: dt: switch to pre-processor Jean-Christophe PLAGNIOL-VILLARD
2013-05-17 8:28 ` Nicolas Ferre
2013-05-17 12:38 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130517123807.GA16804@game.jcrosoft.org \
--to=plagnioj@jcrosoft.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).