[PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c

[tony@atomide.com (Tony Lindgren)]

We can now boot with device tree. If you don't want to update u-boot,
you can boot with appended DTB with the following instructions:

1. Make sure you have the appended DTB support in .config

   CONFIG_ARM_APPENDED_DTB=y
   CONFIG_ARM_ATAG_DTB_COMPAT=y
   CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND=y

2. Build the zImage

   $ ARCH=arm CROSS_COMPILE=... make zImage

3. Build the device tree blobs

   $ ARCH=arm CROSS_COMPILE=... make dtbs

4. Append the dtb to zImage

   $ cat arch/arm/boot/zImage arch/arm/boot/dts/omap4-sdp.dtb > /tmp/appended

5. Use mkimage to produce the appended device tree uImage

   $ mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 \
     -n "Linux" -d /tmp/appended /tmp/uImage

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig         |    8 
 arch/arm/mach-omap2/Makefile        |    1 
 arch/arm/mach-omap2/board-4430sdp.c |  765 -----------------------------------
 3 files changed, 774 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/board-4430sdp.c

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index f49cd51..465edd1 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -378,14 +378,6 @@ config MACH_TI8148EVM
 	depends on SOC_TI81XX
 	default y
 
-config MACH_OMAP_4430SDP
-	bool "OMAP 4430 SDP board"
-	default y
-	depends on ARCH_OMAP4
-	select OMAP_PACKAGE_CBL
-	select OMAP_PACKAGE_CBS
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
 config MACH_OMAP4_PANDA
 	bool "OMAP4 Panda Board"
 	default y
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 55a9d67..875d61d 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -251,7 +251,6 @@ obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o
 obj-$(CONFIG_MACH_CM_T3517)		+= board-cm-t3517.o
 obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o
 obj-$(CONFIG_MACH_TOUCHBOOK)		+= board-omap3touchbook.o
-obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
 obj-$(CONFIG_MACH_OMAP4_PANDA)		+= board-omap4panda.o
 
 obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
deleted file mode 100644
index 56a9a4f..0000000
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ /dev/null
@@ -1,765 +0,0 @@
-/*
- * Board support file for OMAP4430 SDP.
- *
- * Copyright (C) 2009 Texas Instruments
- *
- * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * Based on mach-omap2/board-3430sdp.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/usb/otg.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c/twl.h>
-#include <linux/mfd/twl6040.h>
-#include <linux/gpio_keys.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/pwm.h>
-#include <linux/leds.h>
-#include <linux/leds_pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/omap4-keypad.h>
-#include <linux/usb/musb.h>
-#include <linux/usb/phy.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "omap4-keypad.h"
-#include <linux/wl12xx.h>
-#include <linux/platform_data/omap-abe-twl6040.h>
-
-#include "soc.h"
-#include "mux.h"
-#include "mmc.h"
-#include "hsmmc.h"
-#include "control.h"
-#include "common-board-devices.h"
-#include "dss-common.h"
-
-#define ETH_KS8851_IRQ			34
-#define ETH_KS8851_POWER_ON		48
-#define ETH_KS8851_QUART		138
-#define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO	184
-#define OMAP4_SFH7741_ENABLE_GPIO		188
-
-#define GPIO_WIFI_PMENA		54
-#define GPIO_WIFI_IRQ		53
-
-static const int sdp4430_keymap[] = {
-	KEY(0, 0, KEY_E),
-	KEY(0, 1, KEY_R),
-	KEY(0, 2, KEY_T),
-	KEY(0, 3, KEY_HOME),
-	KEY(0, 4, KEY_F5),
-	KEY(0, 5, KEY_UNKNOWN),
-	KEY(0, 6, KEY_I),
-	KEY(0, 7, KEY_LEFTSHIFT),
-
-	KEY(1, 0, KEY_D),
-	KEY(1, 1, KEY_F),
-	KEY(1, 2, KEY_G),
-	KEY(1, 3, KEY_SEND),
-	KEY(1, 4, KEY_F6),
-	KEY(1, 5, KEY_UNKNOWN),
-	KEY(1, 6, KEY_K),
-	KEY(1, 7, KEY_ENTER),
-
-	KEY(2, 0, KEY_X),
-	KEY(2, 1, KEY_C),
-	KEY(2, 2, KEY_V),
-	KEY(2, 3, KEY_END),
-	KEY(2, 4, KEY_F7),
-	KEY(2, 5, KEY_UNKNOWN),
-	KEY(2, 6, KEY_DOT),
-	KEY(2, 7, KEY_CAPSLOCK),
-
-	KEY(3, 0, KEY_Z),
-	KEY(3, 1, KEY_KPPLUS),
-	KEY(3, 2, KEY_B),
-	KEY(3, 3, KEY_F1),
-	KEY(3, 4, KEY_F8),
-	KEY(3, 5, KEY_UNKNOWN),
-	KEY(3, 6, KEY_O),
-	KEY(3, 7, KEY_SPACE),
-
-	KEY(4, 0, KEY_W),
-	KEY(4, 1, KEY_Y),
-	KEY(4, 2, KEY_U),
-	KEY(4, 3, KEY_F2),
-	KEY(4, 4, KEY_VOLUMEUP),
-	KEY(4, 5, KEY_UNKNOWN),
-	KEY(4, 6, KEY_L),
-	KEY(4, 7, KEY_LEFT),
-
-	KEY(5, 0, KEY_S),
-	KEY(5, 1, KEY_H),
-	KEY(5, 2, KEY_J),
-	KEY(5, 3, KEY_F3),
-	KEY(5, 4, KEY_F9),
-	KEY(5, 5, KEY_VOLUMEDOWN),
-	KEY(5, 6, KEY_M),
-	KEY(5, 7, KEY_RIGHT),
-
-	KEY(6, 0, KEY_Q),
-	KEY(6, 1, KEY_A),
-	KEY(6, 2, KEY_N),
-	KEY(6, 3, KEY_BACK),
-	KEY(6, 4, KEY_BACKSPACE),
-	KEY(6, 5, KEY_UNKNOWN),
-	KEY(6, 6, KEY_P),
-	KEY(6, 7, KEY_UP),
-
-	KEY(7, 0, KEY_PROG1),
-	KEY(7, 1, KEY_PROG2),
-	KEY(7, 2, KEY_PROG3),
-	KEY(7, 3, KEY_PROG4),
-	KEY(7, 4, KEY_F4),
-	KEY(7, 5, KEY_UNKNOWN),
-	KEY(7, 6, KEY_OK),
-	KEY(7, 7, KEY_DOWN),
-};
-static struct omap_device_pad keypad_pads[] = {
-	{	.name   = "kpd_col1.kpd_col1",
-		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
-	},
-	{	.name   = "kpd_col1.kpd_col1",
-		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
-	},
-	{	.name   = "kpd_col2.kpd_col2",
-		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
-	},
-	{	.name   = "kpd_col3.kpd_col3",
-		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
-	},
-	{	.name   = "kpd_col4.kpd_col4",
-		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
-	},
-	{	.name   = "kpd_col5.kpd_col5",
-		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
-	},
-	{	.name   = "gpmc_a23.kpd_col7",
-		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
-	},
-	{	.name   = "gpmc_a22.kpd_col6",
-		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
-	},
-	{	.name   = "kpd_row0.kpd_row0",
-		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
-			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
-	},
-	{	.name   = "kpd_row1.kpd_row1",
-		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
-			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
-	},
-	{	.name   = "kpd_row2.kpd_row2",
-		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
-			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
-	},
-	{	.name   = "kpd_row3.kpd_row3",
-		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
-			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
-	},
-	{	.name   = "kpd_row4.kpd_row4",
-		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
-			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
-	},
-	{	.name   = "kpd_row5.kpd_row5",
-		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
-			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
-	},
-	{	.name   = "gpmc_a18.kpd_row6",
-		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
-			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
-	},
-	{	.name   = "gpmc_a19.kpd_row7",
-		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
-			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
-	},
-};
-
-static struct matrix_keymap_data sdp4430_keymap_data = {
-	.keymap			= sdp4430_keymap,
-	.keymap_size		= ARRAY_SIZE(sdp4430_keymap),
-};
-
-static struct omap4_keypad_platform_data sdp4430_keypad_data = {
-	.keymap_data		= &sdp4430_keymap_data,
-	.rows			= 8,
-	.cols			= 8,
-};
-
-static struct omap_board_data keypad_data = {
-	.id	    		= 1,
-	.pads	 		= keypad_pads,
-	.pads_cnt       	= ARRAY_SIZE(keypad_pads),
-};
-
-static struct gpio_led sdp4430_gpio_leds[] = {
-	{
-		.name	= "omap4:green:debug0",
-		.gpio	= 61,
-	},
-	{
-		.name	= "omap4:green:debug1",
-		.gpio	= 30,
-	},
-	{
-		.name	= "omap4:green:debug2",
-		.gpio	= 7,
-	},
-	{
-		.name	= "omap4:green:debug3",
-		.gpio	= 8,
-	},
-	{
-		.name	= "omap4:green:debug4",
-		.gpio	= 50,
-	},
-	{
-		.name	= "omap4:blue:user",
-		.gpio	= 169,
-	},
-	{
-		.name	= "omap4:red:user",
-		.gpio	= 170,
-	},
-	{
-		.name	= "omap4:green:user",
-		.gpio	= 139,
-	},
-
-};
-
-static struct gpio_keys_button sdp4430_gpio_keys[] = {
-	{
-		.desc			= "Proximity Sensor",
-		.type			= EV_SW,
-		.code			= SW_FRONT_PROXIMITY,
-		.gpio			= OMAP4_SFH7741_SENSOR_OUTPUT_GPIO,
-		.active_low		= 0,
-	}
-};
-
-static struct gpio_led_platform_data sdp4430_led_data = {
-	.leds	= sdp4430_gpio_leds,
-	.num_leds	= ARRAY_SIZE(sdp4430_gpio_leds),
-};
-
-static struct pwm_lookup sdp4430_pwm_lookup[] = {
-	PWM_LOOKUP("twl-pwm", 0, "leds_pwm", "omap4::keypad"),
-	PWM_LOOKUP("twl-pwm", 1, "pwm-backlight", NULL),
-	PWM_LOOKUP("twl-pwmled", 0, "leds_pwm", "omap4:green:chrg"),
-};
-
-static struct led_pwm sdp4430_pwm_leds[] = {
-	{
-		.name		= "omap4::keypad",
-		.max_brightness	= 127,
-		.pwm_period_ns	= 7812500,
-	},
-	{
-		.name		= "omap4:green:chrg",
-		.max_brightness	= 255,
-		.pwm_period_ns	= 7812500,
-	},
-};
-
-static struct led_pwm_platform_data sdp4430_pwm_data = {
-	.num_leds	= ARRAY_SIZE(sdp4430_pwm_leds),
-	.leds		= sdp4430_pwm_leds,
-};
-
-static struct platform_device sdp4430_leds_pwm = {
-	.name	= "leds_pwm",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &sdp4430_pwm_data,
-	},
-};
-
-/* Dummy regulator for pwm-backlight driver */
-static struct regulator_consumer_supply backlight_supply =
-	REGULATOR_SUPPLY("enable", "pwm-backlight");
-
-static struct platform_pwm_backlight_data sdp4430_backlight_data = {
-	.max_brightness = 127,
-	.dft_brightness = 127,
-	.pwm_period_ns = 7812500,
-};
-
-static struct platform_device sdp4430_backlight_pwm = {
-	.name   = "pwm-backlight",
-	.id     = -1,
-	.dev    = {
-		.platform_data = &sdp4430_backlight_data,
-	},
-};
-
-static int omap_prox_activate(struct device *dev)
-{
-	gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 1);
-	return 0;
-}
-
-static void omap_prox_deactivate(struct device *dev)
-{
-	gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 0);
-}
-
-static struct gpio_keys_platform_data sdp4430_gpio_keys_data = {
-	.buttons	= sdp4430_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(sdp4430_gpio_keys),
-	.enable		= omap_prox_activate,
-	.disable	= omap_prox_deactivate,
-};
-
-static struct platform_device sdp4430_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &sdp4430_gpio_keys_data,
-	},
-};
-
-static struct platform_device sdp4430_leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &sdp4430_led_data,
-	},
-};
-static struct spi_board_info sdp4430_spi_board_info[] __initdata = {
-	{
-		.modalias               = "ks8851",
-		.bus_num                = 1,
-		.chip_select            = 0,
-		.max_speed_hz           = 24000000,
-		/*
-		 * .irq is set to gpio_to_irq(ETH_KS8851_IRQ)
-		 * in omap_4430sdp_init
-		 */
-	},
-};
-
-static struct gpio sdp4430_eth_gpios[] __initdata = {
-	{ ETH_KS8851_POWER_ON,	GPIOF_OUT_INIT_HIGH,	"eth_power"	},
-	{ ETH_KS8851_QUART,	GPIOF_OUT_INIT_HIGH,	"quart"		},
-	{ ETH_KS8851_IRQ,	GPIOF_IN,		"eth_irq"	},
-};
-
-static int __init omap_ethernet_init(void)
-{
-	int status;
-
-	/* Request of GPIO lines */
-	status = gpio_request_array(sdp4430_eth_gpios,
-				    ARRAY_SIZE(sdp4430_eth_gpios));
-	if (status)
-		pr_err("Cannot request ETH GPIOs\n");
-
-	return status;
-}
-
-static struct regulator_consumer_supply sdp4430_vbat_supply[] = {
-	REGULATOR_SUPPLY("vddvibl", "twl6040-vibra"),
-	REGULATOR_SUPPLY("vddvibr", "twl6040-vibra"),
-};
-
-static struct regulator_init_data sdp4430_vbat_data = {
-	.constraints = {
-		.always_on	= 1,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(sdp4430_vbat_supply),
-	.consumer_supplies	= sdp4430_vbat_supply,
-};
-
-static struct fixed_voltage_config sdp4430_vbat_pdata = {
-	.supply_name	= "VBAT",
-	.microvolts	= 3750000,
-	.init_data	= &sdp4430_vbat_data,
-	.gpio		= -EINVAL,
-};
-
-static struct platform_device sdp4430_vbat = {
-	.name		= "reg-fixed-voltage",
-	.id		= -1,
-	.dev = {
-		.platform_data = &sdp4430_vbat_pdata,
-	},
-};
-
-static struct platform_device sdp4430_dmic_codec = {
-	.name	= "dmic-codec",
-	.id	= -1,
-};
-
-static struct platform_device sdp4430_hdmi_audio_codec = {
-	.name	= "hdmi-audio-codec",
-	.id	= -1,
-};
-
-static struct omap_abe_twl6040_data sdp4430_abe_audio_data = {
-	.card_name = "SDP4430",
-	.has_hs		= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
-	.has_hf		= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
-	.has_ep		= 1,
-	.has_aux	= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
-	.has_vibra	= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
-
-	.has_dmic	= 1,
-	.has_hsmic	= 1,
-	.has_mainmic	= 1,
-	.has_submic	= 1,
-	.has_afm	= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
-
-	.jack_detection = 1,
-	/* MCLK input is 38.4MHz */
-	.mclk_freq	= 38400000,
-};
-
-static struct platform_device sdp4430_abe_audio = {
-	.name		= "omap-abe-twl6040",
-	.id		= -1,
-	.dev = {
-		.platform_data = &sdp4430_abe_audio_data,
-	},
-};
-
-static struct platform_device *sdp4430_devices[] __initdata = {
-	&sdp4430_gpio_keys_device,
-	&sdp4430_leds_gpio,
-	&sdp4430_leds_pwm,
-	&sdp4430_backlight_pwm,
-	&sdp4430_vbat,
-	&sdp4430_dmic_codec,
-	&sdp4430_abe_audio,
-	&sdp4430_hdmi_audio_codec,
-};
-
-static struct omap_musb_board_data musb_board_data = {
-	.interface_type		= MUSB_INTERFACE_UTMI,
-	.mode			= MUSB_OTG,
-	.power			= 100,
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 2,
-		.caps		=  MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.nonremovable   = true,
-		.ocr_mask	= MMC_VDD_29_30,
-		.no_off_init	= true,
-	},
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{
-		.mmc		= 5,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
-		.pm_caps	= MMC_PM_KEEP_POWER,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.ocr_mask	= MMC_VDD_165_195,
-		.nonremovable	= true,
-	},
-	{}	/* Terminator */
-};
-
-static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-static struct regulator_consumer_supply omap4_sdp4430_vmmc5_supply = {
-	.supply = "vmmc",
-	.dev_name = "omap_hsmmc.4",
-};
-
-static struct regulator_init_data sdp4430_vmmc5 = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = 1,
-	.consumer_supplies = &omap4_sdp4430_vmmc5_supply,
-};
-
-static struct fixed_voltage_config sdp4430_vwlan = {
-	.supply_name		= "vwl1271",
-	.microvolts		= 1800000, /* 1.8V */
-	.gpio			= GPIO_WIFI_PMENA,
-	.startup_delay		= 70000, /* 70msec */
-	.enable_high		= 1,
-	.enabled_at_boot	= 0,
-	.init_data		= &sdp4430_vmmc5,
-};
-
-static struct platform_device omap_vwlan_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data = &sdp4430_vwlan,
-	},
-};
-
-static struct regulator_init_data sdp4430_vaux1 = {
-	.constraints = {
-		.min_uV			= 1000000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(sdp4430_vaux_supply),
-	.consumer_supplies      = sdp4430_vaux_supply,
-};
-
-static struct regulator_init_data sdp4430_vusim = {
-	.constraints = {
-		.min_uV			= 1200000,
-		.max_uV			= 2900000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct twl6040_codec_data twl6040_codec = {
-	/* single-step ramp for headset and handsfree */
-	.hs_left_step	= 0x0f,
-	.hs_right_step	= 0x0f,
-	.hf_left_step	= 0x1d,
-	.hf_right_step	= 0x1d,
-};
-
-static struct twl6040_vibra_data twl6040_vibra = {
-	.vibldrv_res = 8,
-	.vibrdrv_res = 3,
-	.viblmotor_res = 10,
-	.vibrmotor_res = 10,
-	.vddvibl_uV = 0,	/* fixed volt supply - VBAT */
-	.vddvibr_uV = 0,	/* fixed volt supply - VBAT */
-};
-
-static struct twl6040_platform_data twl6040_data = {
-	.codec		= &twl6040_codec,
-	.vibra		= &twl6040_vibra,
-	.audpwron_gpio	= 127,
-};
-
-static struct i2c_board_info __initdata sdp4430_i2c_1_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("twl6040", 0x4b),
-		.irq = 119 + OMAP44XX_IRQ_GIC_START,
-		.platform_data = &twl6040_data,
-	},
-};
-
-static struct twl4030_platform_data sdp4430_twldata = {
-	/* Regulators */
-	.vusim		= &sdp4430_vusim,
-	.vaux1		= &sdp4430_vaux1,
-};
-
-static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("tmp105", 0x48),
-	},
-	{
-		I2C_BOARD_INFO("bh1780", 0x29),
-	},
-};
-static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("hmc5843", 0x1e),
-	},
-};
-static int __init omap4_i2c_init(void)
-{
-	omap4_pmic_get_config(&sdp4430_twldata, TWL_COMMON_PDATA_USB,
-			TWL_COMMON_REGULATOR_VDAC |
-			TWL_COMMON_REGULATOR_VAUX2 |
-			TWL_COMMON_REGULATOR_VAUX3 |
-			TWL_COMMON_REGULATOR_VMMC |
-			TWL_COMMON_REGULATOR_VPP |
-			TWL_COMMON_REGULATOR_VANA |
-			TWL_COMMON_REGULATOR_VCXIO |
-			TWL_COMMON_REGULATOR_VUSB |
-			TWL_COMMON_REGULATOR_CLK32KG |
-			TWL_COMMON_REGULATOR_V1V8 |
-			TWL_COMMON_REGULATOR_V2V1);
-	omap4_pmic_init("twl6030", &sdp4430_twldata, sdp4430_i2c_1_boardinfo,
-			ARRAY_SIZE(sdp4430_i2c_1_boardinfo));
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
-				ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
-	omap_register_i2c_bus(4, 400, sdp4430_i2c_4_boardinfo,
-				ARRAY_SIZE(sdp4430_i2c_4_boardinfo));
-	return 0;
-}
-
-static void __init omap_sfh7741prox_init(void)
-{
-	int error;
-
-	error = gpio_request_one(OMAP4_SFH7741_ENABLE_GPIO,
-				 GPIOF_OUT_INIT_LOW, "sfh7741");
-	if (error < 0)
-		pr_err("%s:failed to request GPIO %d, error %d\n",
-			__func__, OMAP4_SFH7741_ENABLE_GPIO, error);
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	/* NIRQ2 for twl6040 */
-	OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 |
-		  OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
-	/* GPIO_127 for twl6040 */
-	OMAP4_MUX(HDQ_SIO, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
-	/* McPDM */
-	OMAP4_MUX(ABE_PDM_UL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
-	OMAP4_MUX(ABE_PDM_DL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
-	OMAP4_MUX(ABE_PDM_FRAME, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP4_MUX(ABE_PDM_LB_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
-	OMAP4_MUX(ABE_CLKS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
-	/* DMIC */
-	OMAP4_MUX(ABE_DMIC_CLK1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP4_MUX(ABE_DMIC_DIN1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP4_MUX(ABE_DMIC_DIN2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP4_MUX(ABE_DMIC_DIN3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	/* McBSP1 */
-	OMAP4_MUX(ABE_MCBSP1_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP4_MUX(ABE_MCBSP1_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
-	OMAP4_MUX(ABE_MCBSP1_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT |
-		  OMAP_PULL_ENA),
-	OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	/* McBSP2 */
-	OMAP4_MUX(ABE_MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP4_MUX(ABE_MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
-	OMAP4_MUX(ABE_MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT |
-		  OMAP_PULL_ENA),
-	OMAP4_MUX(ABE_MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-#else
-#define board_mux	NULL
- #endif
-
-static void __init omap4_sdp4430_wifi_mux_init(void)
-{
-	omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT |
-				OMAP_PIN_OFF_WAKEUPENABLE);
-	omap_mux_init_gpio(GPIO_WIFI_PMENA, OMAP_PIN_OUTPUT);
-
-	omap_mux_init_signal("sdmmc5_cmd.sdmmc5_cmd",
-				OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("sdmmc5_clk.sdmmc5_clk",
-				OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("sdmmc5_dat0.sdmmc5_dat0",
-				OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("sdmmc5_dat1.sdmmc5_dat1",
-				OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("sdmmc5_dat2.sdmmc5_dat2",
-				OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("sdmmc5_dat3.sdmmc5_dat3",
-				OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
-
-}
-
-static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
-	.board_ref_clock = WL12XX_REFCLOCK_26,
-	.board_tcxo_clock = WL12XX_TCXOCLOCK_26,
-};
-
-static void __init omap4_sdp4430_wifi_init(void)
-{
-	int ret;
-
-	omap4_sdp4430_wifi_mux_init();
-	omap4_sdp4430_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
-	ret = wl12xx_set_platform_data(&omap4_sdp4430_wlan_data);
-	if (ret)
-		pr_err("Error setting wl12xx data: %d\n", ret);
-	ret = platform_device_register(&omap_vwlan_device);
-	if (ret)
-		pr_err("Error registering wl12xx device: %d\n", ret);
-}
-
-static void __init omap_4430sdp_init(void)
-{
-	int status;
-	int package = OMAP_PACKAGE_CBS;
-
-	if (omap_rev() == OMAP4430_REV_ES1_0)
-		package = OMAP_PACKAGE_CBL;
-	omap4_mux_init(board_mux, NULL, package);
-
-	omap4_i2c_init();
-	omap_sfh7741prox_init();
-	regulator_register_always_on(0, "backlight-enable",
-				     &backlight_supply, 1, 0);
-	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-	omap4_sdp4430_wifi_init();
-	omap4_twl6030_hsmmc_init(mmc);
-
-	usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto");
-	usb_musb_init(&musb_board_data);
-
-	status = omap_ethernet_init();
-	if (status) {
-		pr_err("Ethernet initialization failed: %d\n", status);
-	} else {
-		sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
-		spi_register_board_info(sdp4430_spi_board_info,
-				ARRAY_SIZE(sdp4430_spi_board_info));
-	}
-
-	pwm_add_table(sdp4430_pwm_lookup, ARRAY_SIZE(sdp4430_pwm_lookup));
-	status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data);
-	if (status)
-		pr_err("Keypad initialization failed: %d\n", status);
-
-	omap_4430sdp_display_init();
-}
-
-MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
-	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(omap4_smp_ops),
-	.reserve	= omap_reserve,
-	.map_io		= omap4_map_io,
-	.init_early	= omap4430_init_early,
-	.init_irq	= gic_init_irq,
-	.init_machine	= omap_4430sdp_init,
-	.init_late	= omap4430_init_late,
-	.init_time	= omap4_local_timer_init,
-	.restart	= omap44xx_restart,
-MACHINE_END