From mboxrd@z Thu Jan  1 00:00:00 1970
From: shawn.guo@linaro.org (Shawn Guo)
Date: Thu, 30 May 2013 14:25:29 +0800
Subject: [PATCH 1/2] ARM: dts: imx6q: Add pinctrl for usdhc2 and enet
In-Reply-To: <1369861609-30408-2-git-send-email-c.hemp@phytec.de>
References: <1369861609-30408-1-git-send-email-c.hemp@phytec.de>
 <1369861609-30408-2-git-send-email-c.hemp@phytec.de>
Message-ID: <20130530062526.GA2602@S2101-09.ap.freescale.net>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Wed, May 29, 2013 at 11:06:48PM +0200, Christian Hemp wrote:
> Add a group to the usdhc2 and enet pinctrl.
> 
> Signed-off-by: Christian Hemp <c.hemp@phytec.de>
> ---
>  arch/arm/boot/dts/imx6q.dtsi |   33 +++++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
> index ed11bcf..c0c8b7b 100644
> --- a/arch/arm/boot/dts/imx6q.dtsi
> +++ b/arch/arm/boot/dts/imx6q.dtsi
> @@ -157,6 +157,28 @@
>  							MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
>  						>;
>  					};
> +
> +					pinctrl_enet_3: enetgrp-3 {
> +						fsl,pins = <
> +							MX6Q_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
> +							MX6Q_PAD_ENET_MDC__ENET_MDC         0x1b0b0
> +							MX6Q_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
> +							MX6Q_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
> +							MX6Q_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
> +							MX6Q_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
> +							MX6Q_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
> +							MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
> +							MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
> +							MX6Q_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
> +							MX6Q_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
> +							MX6Q_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
> +							MX6Q_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
> +							MX6Q_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
> +							MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
> +							MX6Q_PAD_ENET_CRS_DV__SPDIF_EXT_CLK 0x1b0b0

Why do you need to set up SPDIF_EXT_CLK in ENET pin group?

Shawn

> +							MX6Q_PAD_ENET_TX_EN__ENET_TX_EN     0x1b0b0
> +						>;
> +					};
>  				};
>  
>  				gpmi-nand {
> @@ -266,6 +288,17 @@
>  							MX6Q_PAD_NANDF_D7__SD2_DATA7 0x17059
>  						>;
>  					};
> +
> +					pinctrl_usdhc2_2: usdhc2grp-2 {
> +						fsl,pins = <
> +							MX6Q_PAD_SD2_CMD__SD2_CMD    0x17059
> +							MX6Q_PAD_SD2_CLK__SD2_CLK    0x10059
> +							MX6Q_PAD_SD2_DAT0__SD2_DATA0 0x17059
> +							MX6Q_PAD_SD2_DAT1__SD2_DATA1 0x17059
> +							MX6Q_PAD_SD2_DAT2__SD2_DATA2 0x17059
> +							MX6Q_PAD_SD2_DAT3__SD2_DATA3 0x17059
> +						>;
> +					};
>  				};
>  
>  				usdhc3 {
> -- 
> 1.7.9.5
>