[PATCH 1/8] video: atmel_lcdfb: fix platform data struct

[plagnioj@jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD)]

On 16:27 Thu 30 May     , Andreas Bie?mann wrote:
> On 30.05.13 09:23, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > On 08:39 Thu 30 May     , Richard Genoud wrote:
> >> 2013/5/29 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>:
> >>> On 19:44 Wed 29 May     , Richard Genoud wrote:
> >>>> 2013/5/29 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>:
> >>>>> On 16:36 Wed 29 May     , Richard Genoud wrote:
> >>>>>> 2013/4/11 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>:
> >>>>>>> Today we mix pdata and drivers data in the struct atmel_lcdfb_info
> >>>>>>> Fix it and introduce a new struct atmel_lcdfb_pdata for platform data only
> >>>>>>>
> >>>>>>> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> >>>>>>> Cc: linux-fbdev at vger.kernel.org
> >>>>>>> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
> >>>>>>> Cc: Andrew Morton <akpm@linux-foundation.org>
> >>>>>>> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
> >>>>>>> ---
> >>>>>>>  arch/arm/mach-at91/at91sam9261_devices.c    |    6 +-
> >>>>>>>  arch/arm/mach-at91/at91sam9263_devices.c    |    6 +-
> >>>>>>>  arch/arm/mach-at91/at91sam9g45_devices.c    |    6 +-
> >>>>>>>  arch/arm/mach-at91/at91sam9rl_devices.c     |    6 +-
> >>>>>>>  arch/arm/mach-at91/board-sam9261ek.c        |    6 +-
> >>>>>>>  arch/arm/mach-at91/board-sam9263ek.c        |    4 +-
> >>>>>>>  arch/arm/mach-at91/board-sam9m10g45ek.c     |    4 +-
> >>>>>>>  arch/arm/mach-at91/board-sam9rlek.c         |    4 +-
> >>>>>>>  arch/arm/mach-at91/board.h                  |    4 +-
> >>>>>>>  arch/avr32/boards/atngw100/evklcd10x.c      |    6 +-
> >>>>>>>  arch/avr32/boards/atngw100/mrmt.c           |    4 +-
> >>>>>>>  arch/avr32/boards/atstk1000/atstk1000.h     |    2 +-
> >>>>>>>  arch/avr32/boards/atstk1000/setup.c         |    2 +-
> >>>>>>>  arch/avr32/boards/favr-32/setup.c           |    2 +-
> >>>>>>>  arch/avr32/boards/hammerhead/setup.c        |    2 +-
> >>>>>>>  arch/avr32/boards/merisc/display.c          |    2 +-
> >>>>>>>  arch/avr32/boards/mimc200/setup.c           |    4 +-
> >>>>>>>  arch/avr32/mach-at32ap/at32ap700x.c         |    8 +--
> >>>>>>>  arch/avr32/mach-at32ap/include/mach/board.h |    4 +-
> >>>>>>>  drivers/video/atmel_lcdfb.c                 |  104 +++++++++++++++++----------
> >>>>>>>  include/video/atmel_lcdc.h                  |   24 +------
> >>>>>>>  21 files changed, 109 insertions(+), 101 deletions(-)
> >>>>>>>
> >>>>>> [snip]
> >>>>>>> diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
> >>>>>>> index c1a2914..98733cd4 100644
> >>>>>>> --- a/drivers/video/atmel_lcdfb.c
> >>>>>>> +++ b/drivers/video/atmel_lcdfb.c
> >>>>>>> @@ -20,12 +20,45 @@
> >>>>>>>  #include <linux/gfp.h>
> >>>>>>>  #include <linux/module.h>
> >>>>>>>  #include <linux/platform_data/atmel.h>
> >>>>>>> +#include <video/of_display_timing.h>
> >>>>>>>
> >>>>>>>  #include <mach/cpu.h>
> >>>>>>>  #include <asm/gpio.h>
> >>>>>>>
> >>>>>>>  #include <video/atmel_lcdc.h>
> >>>>>>>
> >>>>>>> +struct atmel_lcdfb_config {
> >>>>>>> +       bool have_alt_pixclock;
> >>>>>>> +       bool have_hozval;
> >>>>>>> +       bool have_intensity_bit;
> >>>>>>> +};
> >>>>>>> +
> >>>>>>> + /* LCD Controller info data structure, stored in device platform_data */
> >>>>>>> +struct atmel_lcdfb_info {
> >>>>>>> +       spinlock_t              lock;
> >>>>>>> +       struct fb_info          *info;
> >>>>>>> +       void __iomem            *mmio;
> >>>>>>> +       int                     irq_base;
> >>>>>>> +       struct work_struct      task;
> >>>>>>> +
> >>>>>>> +       unsigned int            smem_len;
> >>>>>>> +       struct platform_device  *pdev;
> >>>>>>> +       struct clk              *bus_clk;
> >>>>>>> +       struct clk              *lcdc_clk;
> >>>>>>> +
> >>>>>>> +       struct backlight_device *backlight;
> >>>>>>> +       u8                      bl_power;
> >>>>>>> +       bool                    lcdcon_pol_negative;
> >>>>>> I think lcdcon_pol_negative should be part of pdata, because it really
> >>>>>> depends on how the PWM is wired on the board.
> >>>>>>
> >>>>>
> >>>>> maybe but no one mainline use it on any pdata for non-dt boars
> >>>>> so I did not want to expose it
> >>>> Well, at least, I'm using it :)
> >>>> (and I guess that Andreas is using it also, otherwise he wouldn't have
> >>>> introduce it !)
> >>>
> >>> yes but pdata is for non-dt boards, for dt you can keep it in struct
> >>> atmel_lcdfb_info and add a property
> >>>
> >>> if non-dt boards want it my answer is I do not care switch to DT
> >>
> >> ok (I use a full DT board based on sam9g35)
> >>
> >> so I'll add something like
> >> sinfo->lcdcon_pol_negative = of_property_read_bool(display_np,
> >> "atmel,lcdcon-pwm-pulse-low");
> >> in /atmel_lcdfb.c
> >>
> >> But I thought the goal of this patch was to separate driver data from
> >> platform specific data, and IMHO, lcdcon_pol_negative is a specificity
> >> of the platform.
> > 
> > You are right but as non one mainline use it as pdata I choose to drop it
> > and only keep it on the driver as we can still use it for DT
> > 
> > It's a way to force peopoe to switch to DT
> 
> well, we use it on an avr32 board (not mainlined; though no kernel
> update planned currently) ... but no way to use DT currently.

If there is 1 ARV32 user it's an other story

Best Regards,
J.
> 
> Best regards
> 
> Andreas Bie?mann