From mboxrd@z Thu Jan  1 00:00:00 1970
From: mturquette@linaro.org (Mike Turquette)
Date: Thu, 30 May 2013 12:07:50 -0700
Subject: [PATCH 6/6] ARM: u300: convert MMC/SD clock to device tree
In-Reply-To: <1369330288-14856-7-git-send-email-linus.walleij@stericsson.com>
References: <1369330288-14856-1-git-send-email-linus.walleij@stericsson.com>
 <1369330288-14856-7-git-send-email-linus.walleij@stericsson.com>
Message-ID: <20130530190750.4470.31756@quantum>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Quoting Linus Walleij (2013-05-23 10:31:28)
> From: Linus Walleij <linus.walleij@linaro.org>
> 
> This converts the last of the U300 clocks to being probed from
> the device tree.
> 
> Cc: Mike Turquette <mturquette@linaro.org>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> Hi Mike, I'm seeking an ACK on this to take it through the
> ARM SoC tree.

Acked-by: Mike Turquette <mturquette@linaro.org>

> ---
>  .../bindings/clock/ste-u300-syscon-clock.txt       | 23 ++++++++++++++++++++++
>  arch/arm/boot/dts/ste-u300.dts                     |  9 +++++++--
>  drivers/clk/clk-u300.c                             | 22 ++++++++++++++++-----
>  3 files changed, 47 insertions(+), 7 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt b/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt
> index b6a30f5..7cafcb9 100644
> --- a/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt
> @@ -55,3 +55,26 @@ gpio: gpio at c0016000 {
>         (...)
>         clocks = <&gpio_clk>;
>  };
> +
> +
> +Bindings for the MMC/SD card clock:
> +
> +Required properties:
> +- compatible: must be "stericsson,u300-syscon-mclk"
> +- #clock-cells: must be <0>
> +
> +Optional properties:
> +- clocks: parent clock(s)
> +
> +mmc_mclk: mmc_mclk {
> +       #clock-cells = <0>;
> +       compatible = "stericsson,u300-syscon-mclk";
> +       clocks = <&mmc_pclk>;
> +};
> +
> +mmcsd: mmcsd at c0001000 {
> +       compatible = "arm,pl18x", "arm,primecell";
> +       clocks = <&mmc_pclk>, <&mmc_mclk>;
> +       clock-names = "apb_pclk", "mclk";
> +       (...)
> +};
> diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
> index e83aafc..d5dd243 100644
> --- a/arch/arm/boot/dts/ste-u300.dts
> +++ b/arch/arm/boot/dts/ste-u300.dts
> @@ -205,6 +205,11 @@
>                         clock-id = <5>;
>                         clocks = <&fast_clk>;
>                 };
> +               mmc_mclk: mmc_mclk {
> +                       #clock-cells = <0>;
> +                       compatible = "stericsson,u300-syscon-mclk";
> +                       clocks = <&mmc_pclk>;
> +               };
>                 spi_clk: spi_p_clk at 26M {
>                         #clock-cells = <0>;
>                         compatible = "stericsson,u300-syscon-clk";
> @@ -433,8 +438,8 @@
>                         reg = <0xc0001000 0x1000>;
>                         interrupt-parent = <&vicb>;
>                         interrupts = <6 7>;
> -                       clocks = <&mmc_pclk>;
> -                       clock-names = "apb_pclk";
> +                       clocks = <&mmc_pclk>, <&mmc_mclk>;
> +                       clock-names = "apb_pclk", "mclk";
>                         max-frequency = <24000000>;
>                         bus-width = <4>; // SD-card slot
>                         mmc-cap-mmc-highspeed;
> diff --git a/drivers/clk/clk-u300.c b/drivers/clk/clk-u300.c
> index 5f234d3..8774e05 100644
> --- a/drivers/clk/clk-u300.c
> +++ b/drivers/clk/clk-u300.c
> @@ -1139,6 +1139,18 @@ mclk_clk_register(struct device *dev, const char *name,
>         return clk;
>  }
>  
> +static void __init of_u300_syscon_mclk_init(struct device_node *np)
> +{
> +       struct clk *clk = ERR_PTR(-EINVAL);
> +       const char *clk_name = np->name;
> +       const char *parent_name;
> +
> +       parent_name = of_clk_get_parent_name(np, 0);
> +       clk = mclk_clk_register(NULL, clk_name, parent_name, false);
> +       if (!IS_ERR(clk))
> +               of_clk_add_provider(np, of_clk_src_simple_get, clk);
> +}
> +
>  static const __initconst struct of_device_id u300_clk_match[] = {
>         {
>                 .compatible = "fixed-clock",
> @@ -1152,12 +1164,16 @@ static const __initconst struct of_device_id u300_clk_match[] = {
>                 .compatible = "stericsson,u300-syscon-clk",
>                 .data = of_u300_syscon_clk_init,
>         },
> +       {
> +               .compatible = "stericsson,u300-syscon-mclk",
> +               .data = of_u300_syscon_mclk_init,
> +       },
>  };
>  
> +
>  void __init u300_clk_init(void __iomem *base)
>  {
>         u16 val;
> -       struct clk *clk;
>  
>         syscon_vbase = base;
>  
> @@ -1175,8 +1191,4 @@ void __init u300_clk_init(void __iomem *base)
>         writew(val, syscon_vbase + U300_SYSCON_PMCR);
>  
>         of_clk_init(u300_clk_match);
> -
> -       /* Then this special MMC/SD clock */
> -       clk = mclk_clk_register(NULL, "mmc_clk", "mmc_p_clk", false);
> -       clk_register_clkdev(clk, NULL, "mmci");
>  }
> -- 
> 1.7.11.3