From mboxrd@z Thu Jan 1 00:00:00 1970 From: shawn.guo@linaro.org (Shawn Guo) Date: Thu, 6 Jun 2013 23:09:37 +0800 Subject: [PATCH v4 1/6] drivers: bus: add a new driver for WEIM In-Reply-To: <1369722012-6915-2-git-send-email-b32955@freescale.com> References: <1369722012-6915-1-git-send-email-b32955@freescale.com> <1369722012-6915-2-git-send-email-b32955@freescale.com> Message-ID: <20130606150935.GD28270@S2101-09.ap.freescale.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, May 28, 2013 at 02:20:07PM +0800, Huang Shijie wrote: > The WEIM(Wireless External Interface Module) works like a bus. > You can attach many different devices on it, such as NOR, onenand. > > In the case of i.MX6q-sabreauto, the NOR is connected to WEIM. > > This patch also adds the devicetree binding document. > The driver only works when the devicetree is enabled. > > Signed-off-by: Huang Shijie > --- > Documentation/devicetree/bindings/bus/imx-weim.txt | 49 +++++++ > drivers/bus/Kconfig | 9 ++ > drivers/bus/Makefile | 1 + > drivers/bus/imx-weim.c | 138 ++++++++++++++++++++ > 4 files changed, 197 insertions(+), 0 deletions(-) > create mode 100644 Documentation/devicetree/bindings/bus/imx-weim.txt > create mode 100644 drivers/bus/imx-weim.c Since no one is collecting drivers/bus/ patches right now, I just applied the whole series to have the patch go via imx -> arm-soc. Please let me know if there is any problem. Shawn