From mboxrd@z Thu Jan 1 00:00:00 1970 From: tony@atomide.com (Tony Lindgren) Date: Fri, 7 Jun 2013 11:37:48 -0700 Subject: [PATCH V2 14/14] ARM: OMAP4: hwmod data: Clean up the data file In-Reply-To: <51B22303.2000002@ti.com> References: <1370606175-22599-1-git-send-email-r.sricharan@ti.com> <20130607162927.GA3331@atomide.com> <20130607175005.GB3331@atomide.com> <51B22303.2000002@ti.com> Message-ID: <20130607183748.GF3331@atomide.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org * Santosh Shilimkar [130607 11:20]: > On Friday 07 June 2013 01:50 PM, Tony Lindgren wrote: > > * Tony Lindgren [130607 09:35]: > >> * Paul Walmsley [130607 05:38]: > >>> On Fri, 7 Jun 2013, Sricharan R wrote: > >>> > >>>> - The IO resource information like dma request lines, irq number and > >>>> ocp address space can be populated via dt blob. So such data is stripped > >>>> from OMAP4 SOC hwmod data file. > >>>> > >>>> - The devices which are still missing the device tree bindings, > >>>> address space entries are not removed yet. When such devices add > >>>> the dt bindings, respective address space data can be deleted. > >>>> > >>>> - Also other unnecessary hwmods like firewalls are removed as a part of this. > >>>> Since emif was getting registered only because of this firewalls links, > >>>> the mpu->emif direct link is added now. > >>>> > >>>> The above update, results in reduction of about ~1650 lines of code. > >>>> > >>>> Signed-off-by: Santosh Shilimkar > >>>> Signed-off-by: Sricharan R > >>> > >>> Acked-by: Paul Walmsley > >>> > >>> Can't test this one since I don't have an OMAP4 DT config set up in the testbed > >>> yet. Maybe will add that to the testbed after the v3.10 release. > >> > >> OK thanks, applying into omap-for-v3.11/cleanup. > > > > I had to undo the following parts to avoid regressions on omap4sdp. > > Can you please follow up on fixing the related issues so the fixup > > won't be needed? > > > > Seems to work now the same way as earlier for both omap4sdp and blaze > > es, except for DSS, which seems to be a separate issue as posted by > > Tomi. Pushed out now to omap-for-v3.11/cleanup. > > > Thats strange. You shouldn't need those fixes since that data is > expected to be coming from DT. > > Sricharan, Can you please try out the patch against Tony's > V3.11/clean-up branch and see whats missing there. Looking at the diff output with and without, it seems to be that the DMA channels won't get configured. Regards, Tony