From: vinod.koul@intel.com (Vinod Koul)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 27/50] at_hdmac: prepare clk before calling enable
Date: Wed, 12 Jun 2013 14:35:20 +0530 [thread overview]
Message-ID: <20130612090520.GN4107@intel.com> (raw)
In-Reply-To: <1370622358-19575-1-git-send-email-b.brezillon@overkiz.com>
On Fri, Jun 07, 2013 at 06:25:57PM +0200, Boris BREZILLON wrote:
> Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to
> avoid common clk framework warnings.
>
> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
> ---
> drivers/dma/at_hdmac.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
> index e923cda..4772036 100644
> --- a/drivers/dma/at_hdmac.c
> +++ b/drivers/dma/at_hdmac.c
> @@ -1374,7 +1374,7 @@ static int __init at_dma_probe(struct platform_device *pdev)
> err = PTR_ERR(atdma->clk);
> goto err_clk;
> }
> - clk_enable(atdma->clk);
> + clk_prepare_enable(atdma->clk);
Can you add checks for return value in the driver as well
>
> /* force dma off, just in case */
> at_dma_off(atdma);
> @@ -1475,7 +1475,7 @@ err_pool_create:
> platform_set_drvdata(pdev, NULL);
> free_irq(platform_get_irq(pdev, 0), atdma);
> err_irq:
> - clk_disable(atdma->clk);
> + clk_disable_unprepare(atdma->clk);
> clk_put(atdma->clk);
> err_clk:
> iounmap(atdma->regs);
> @@ -1512,7 +1512,7 @@ static int at_dma_remove(struct platform_device *pdev)
> list_del(&chan->device_node);
> }
>
> - clk_disable(atdma->clk);
> + clk_disable_unprepare(atdma->clk);
> clk_put(atdma->clk);
>
> iounmap(atdma->regs);
> @@ -1531,7 +1531,7 @@ static void at_dma_shutdown(struct platform_device *pdev)
> struct at_dma *atdma = platform_get_drvdata(pdev);
>
> at_dma_off(platform_get_drvdata(pdev));
> - clk_disable(atdma->clk);
> + clk_disable_unprepare(atdma->clk);
> }
>
> static int at_dma_prepare(struct device *dev)
> @@ -1588,7 +1588,7 @@ static int at_dma_suspend_noirq(struct device *dev)
>
> /* disable DMA controller */
> at_dma_off(atdma);
> - clk_disable(atdma->clk);
> + clk_disable_unprepare(atdma->clk);
> return 0;
> }
>
> @@ -1618,7 +1618,7 @@ static int at_dma_resume_noirq(struct device *dev)
> struct dma_chan *chan, *_chan;
>
> /* bring back DMA controller */
> - clk_enable(atdma->clk);
> + clk_prepare_enable(atdma->clk);
> dma_writel(atdma, EN, AT_DMA_ENABLE);
>
> /* clear any pending interrupt */
--
~Vinod
next prev parent reply other threads:[~2013-06-12 9:05 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-07 14:24 [RESEND RFC PATCH 00/50] ARM: at91: move to common clk framework Boris BREZILLON
2013-06-07 14:24 ` [RFC PATCH 01/50] ARM: at91: move at91_pmc.h to include/linux/clk/at91.h Boris BREZILLON
2013-06-07 14:24 ` [RFC PATCH 02/50] ARM: at91: add PMC main clock Boris BREZILLON
2013-06-07 15:30 ` Thomas Petazzoni
2013-06-07 15:36 ` boris brezillon
2013-06-07 14:24 ` [RFC PATCH 03/50] ARM: at91: add PMC pll clocks Boris BREZILLON
2013-06-07 14:24 ` [RFC PATCH 04/50] ARM: at91: add PMC master clock Boris BREZILLON
2013-06-07 14:24 ` [RFC PATCH 05/50] ARM: at91: add PMC system clocks Boris BREZILLON
2013-06-07 14:24 ` [RFC PATCH 06/50] ARM: at91: add PMC peripheral clocks Boris BREZILLON
2013-06-07 14:24 ` [RFC PATCH 07/50] ARM: at91: add PMC programmable clocks Boris BREZILLON
2013-06-07 14:24 ` [RFC PATCH 08/50] ARM: at91: add PMC utmi clock Boris BREZILLON
2013-06-07 14:24 ` [RFC PATCH 09/50] ARM: at91: add PMC usb clock Boris BREZILLON
2013-06-07 14:24 ` [RFC PATCH 10/50] ARM: at91: add PMC smd clock Boris BREZILLON
2013-06-07 14:24 ` [RFC PATCH 11/50] ARM: at91: add PMC clk device tree binding doc Boris BREZILLON
2013-06-07 15:08 ` [RFC PATCH 12/50] ARM: at91: move to common clk framework Boris BREZILLON
2013-06-07 15:11 ` [RFC PATCH 13/50] ARM: at91: move at91rm9200 SoC to new at91 clk implem Boris BREZILLON
2013-06-20 6:52 ` Mike Turquette
2013-06-20 7:12 ` boris brezillon
2013-06-07 15:11 ` [RFC PATCH 14/50] ARM: at91: move at91sam9260 " Boris BREZILLON
2013-06-07 15:19 ` [RFC PATCH 15/50] ARM: at91: move at91sam9261 " Boris BREZILLON
2013-06-07 15:20 ` [RFC PATCH 16/50] ARM: at91: move at91sam9263 " Boris BREZILLON
2013-06-07 15:24 ` [RFC PATCH 17/50] ARM: at91: move at91sam9g45 " Boris BREZILLON
2013-06-07 15:25 ` [RFC PATCH 18/50] ARM: at91: move at91sam9n12 " Boris BREZILLON
2013-06-07 15:28 ` [RFC PATCH 19/50] ARM: at91: move at91sam9rl " Boris BREZILLON
2013-06-07 15:30 ` [RFC PATCH 20/50] ARM: at91: move at91sam9x5 SoCs " Boris BREZILLON
2013-06-07 15:36 ` [RFC PATCH 21/50] ARM: at91: move at91sam9 " Boris BREZILLON
2013-06-07 15:37 ` [RFC PATCH 22/50] ARM: at91: move sama5d3 " Boris BREZILLON
2013-06-07 15:42 ` [RFC PATCH 23/50] ARM: at91: move at91rm9200 boards " Boris BREZILLON
2013-06-07 16:23 ` [RFC PATCH 24/50] ARM: at91: move at91sam9 " Boris BREZILLON
2013-06-07 16:23 ` [RFC PATCH 25/50] ARM: at91: move pit timer to common clk framework Boris BREZILLON
2013-06-07 16:24 ` [RFC PATCH 26/50] ARM: at91/tc/clocksource: replace clk_enable/disable with clk_prepare_enable/disable_unprepare Boris BREZILLON
2013-06-07 16:25 ` [RFC PATCH 27/50] at_hdmac: prepare clk before calling enable Boris BREZILLON
2013-06-12 9:05 ` Vinod Koul [this message]
2013-06-12 12:08 ` boris brezillon
2013-06-07 16:26 ` [RFC PATCH 28/50] ASoC: atmel-ssc: " Boris BREZILLON
2013-06-07 16:55 ` Mark Brown
2013-06-07 19:56 ` Boris BREZILLON
2013-06-10 9:06 ` Mark Brown
2013-06-10 9:28 ` boris brezillon
2013-06-07 16:26 ` [RFC PATCH 29/50] mmc: atmel-mci: " Boris BREZILLON
2013-06-07 16:26 ` [RFC PATCH 30/50] pwm: atmel-tcb: " Boris BREZILLON
2013-06-12 10:52 ` Thierry Reding
2013-06-07 18:07 ` [RFC PATCH 31/50] tty: atmel_serial: " Boris BREZILLON
2013-06-07 18:08 ` [RFC PATCH 32/50] usb: gadget: at91_udc: " Boris BREZILLON
2013-06-12 15:06 ` Felipe Balbi
2013-06-07 18:08 ` [RFC PATCH 33/50] ehci-atmel.c: " Boris BREZILLON
2013-06-07 18:08 ` [RFC PATCH 34/50] USB: ohci-at91: " Boris BREZILLON
2013-06-07 18:08 ` [RFC PATCH 35/50] at91/avr32/atmel_lcdfb: " Boris BREZILLON
2013-06-07 18:09 ` [RFC PATCH 36/50] ARM: at91/dt: move at91rm9200 SoC to new at91 clk implem Boris BREZILLON
2013-06-07 18:09 ` [RFC PATCH 37/50] ARM: at91/dt: move at91sam9260 " Boris BREZILLON
2013-06-07 18:12 ` [RFC PATCH 38/50] ARM: at91/dt: move at91sam9263 " Boris BREZILLON
2013-06-07 18:12 ` [RFC PATCH 39/50] ARM: at91/dt: move at91sam9g45 " Boris BREZILLON
2013-06-07 18:13 ` [RFC PATCH 40/50] ARM: at91/dt: move at91sam9n12 " Boris BREZILLON
2013-06-07 18:13 ` [RFC PATCH 41/50] ARM: at91/dt: move at91sam9x5 SoCs " Boris BREZILLON
2013-06-07 18:13 ` [RFC PATCH 42/50] ARM: at91/dt: move at91sam9g20 SoC " Boris BREZILLON
2013-06-07 18:14 ` [RFC PATCH 43/50] ARM: at91/dt: move sama5d3 SoCs " Boris BREZILLON
2013-06-07 18:14 ` [RFC PATCH 44/50] ARM: at91/dt: move sam9260/sam9g20 " Boris BREZILLON
2013-06-07 18:14 ` [RFC PATCH 45/50] ARM: at91/dt: move rm9200 boards " Boris BREZILLON
2013-06-07 19:33 ` [RFC PATCH 37/50] ARM: at91/dt: move at91sam9260 SoC " Boris BREZILLON
2013-06-07 19:41 ` [RFC PATCH 46/50] ARM: at91/dt: move sam9263 boards " Boris BREZILLON
2013-06-07 19:42 ` [RFC PATCH 47/50] ARM: at91/dt: move sam9g45 " Boris BREZILLON
2013-06-07 19:43 ` [RFC PATCH 48/50] ARM: at91/dt: move sam9n12 " Boris BREZILLON
2013-06-07 19:44 ` [RFC PATCH 49/50] ARM: at91/dt: move sam9x5 " Boris BREZILLON
2013-06-07 19:45 ` [RFC PATCH 50/50] ARM: at91/dt: move sama5d3 " Boris BREZILLON
2013-06-07 20:00 ` [RFC PATCH 45/50] ARM: at91/dt: move rm9200 " Boris BREZILLON
2013-06-07 20:03 ` [RFC PATCH 37/50] ARM: at91/dt: move at91sam9260 SoC " Boris BREZILLON
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130612090520.GN4107@intel.com \
--to=vinod.koul@intel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).