[GIT PULL 0/2 v2] Renesas sh-sci updates for v3.11

[GIT PULL 0/2 v2] Renesas sh-sci updates for v3.11

[Simon Horman]

Hi Olof, Hi Arnd,

As requested the first patch is now includes an ack from Greg Kroah-Hartman.

I have included the r8a7790 change in this patch as it
depends on the first change in the pull-request but nothing else.

This pull request will cause some conflicts though I believe all
of them are not difficult to resolve. The renesas-next-20130613 tag in
my tree illustrates how I have handled the conflicts with
both changes already in arm-soc and changes I intend to send
pull requests for in the near future.

The following changes since commit c7788792a5e7b0d5d7f96d0766b4cb6112d47d75:

  Linux 3.10-rc2 (2013-05-20 14:37:38 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-sh-sci-for-v3.11

for you to fetch changes up to fe0b1091e41e0acae8ddf2da2a5a36b6867ff012:

  ARM: shmobile: r8a7790: don't use external clock for SCIFs (2013-06-17 12:17:48 +0900)

----------------------------------------------------------------
Renesas sh-sci updates for v3.11

HSCIF support by Ulrich Hecht.

----------------------------------------------------------------
Ulrich Hecht (2):
      serial: sh-sci: HSCIF support
      ARM: shmobile: r8a7790: don't use external clock for SCIFs

 arch/arm/mach-shmobile/setup-r8a7790.c |   16 ++++-
 drivers/tty/serial/sh-sci.c            |  102 +++++++++++++++++++++++++++++---
 include/linux/serial_sci.h             |   12 +++-
 include/uapi/linux/serial_core.h       |    3 +
 4 files changed, 120 insertions(+), 13 deletions(-)

[PATCH 1/2] serial: sh-sci: HSCIF support

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht@gmail.com>

Adds support for "High Speed Serial Communications Interface with FIFO",
essentially a SCIF with 128-byte FIFOs and more accurate baud rate
generator.

Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/tty/serial/sh-sci.c      |  102 +++++++++++++++++++++++++++++++++++---
 include/linux/serial_sci.h       |   12 +++--
 include/uapi/linux/serial_core.h |    3 ++
 3 files changed, 106 insertions(+), 11 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 1564186..931d6c3 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -146,6 +146,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -165,6 +166,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -183,6 +185,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -201,6 +204,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= { 0x3c, 16 },
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -220,6 +224,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= { 0x20, 16 },
 		[SCLSR]		= { 0x24, 16 },
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -238,6 +243,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -256,6 +262,26 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= { 0x20, 16 },
 		[SCLSR]		= { 0x24, 16 },
+		[HSSRR]		= sci_reg_invalid,
+	},
+
+	/*
+	 * Common HSCIF definitions.
+	 */
+	[SCIx_HSCIF_REGTYPE] = {
+		[SCSMR]		= { 0x00, 16 },
+		[SCBRR]		= { 0x04,  8 },
+		[SCSCR]		= { 0x08, 16 },
+		[SCxTDR]	= { 0x0c,  8 },
+		[SCxSR]		= { 0x10, 16 },
+		[SCxRDR]	= { 0x14,  8 },
+		[SCFCR]		= { 0x18, 16 },
+		[SCFDR]		= { 0x1c, 16 },
+		[SCTFDR]	= sci_reg_invalid,
+		[SCRFDR]	= sci_reg_invalid,
+		[SCSPTR]	= { 0x20, 16 },
+		[SCLSR]		= { 0x24, 16 },
+		[HSSRR]		= { 0x40, 16 },
 	},
 
 	/*
@@ -275,6 +301,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= { 0x24, 16 },
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -294,6 +321,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= { 0x20, 16 },
 		[SCSPTR]	= { 0x24, 16 },
 		[SCLSR]		= { 0x28, 16 },
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -313,6 +341,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 };
 
@@ -374,6 +403,9 @@ static int sci_probe_regmap(struct plat_sci_port *cfg)
 		 */
 		cfg->regtype = SCIx_SH4_SCIF_REGTYPE;
 		break;
+	case PORT_HSCIF:
+		cfg->regtype = SCIx_HSCIF_REGTYPE;
+		break;
 	default:
 		printk(KERN_ERR "Can't probe register map for given port\n");
 		return -EINVAL;
@@ -1798,6 +1830,42 @@ static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps,
 	return ((freq + 16 * bps) / (32 * bps) - 1);
 }
 
+/* calculate sample rate, BRR, and clock select for HSCIF */
+static void sci_baud_calc_hscif(unsigned int bps, unsigned long freq,
+				int *brr, unsigned int *srr,
+				unsigned int *cks)
+{
+	int sr, c, br, err;
+	int min_err = 1000; /* 100% */
+
+	/* Find the combination of sample rate and clock select with the
+	   smallest deviation from the desired baud rate. */
+	for (sr = 8; sr <= 32; sr++) {
+		for (c = 0; c <= 3; c++) {
+			/* integerized formulas from HSCIF documentation */
+			br = freq / (sr * (1 << (2 * c + 1)) * bps) - 1;
+			if (br < 0 || br > 255)
+				continue;
+			err = freq / ((br + 1) * bps * sr *
+			      (1 << (2 * c + 1)) / 1000) - 1000;
+			if (min_err > err) {
+				min_err = err;
+				*brr = br;
+				*srr = sr - 1;
+				*cks = c;
+			}
+		}
+	}
+
+	if (min_err == 1000) {
+		WARN_ON(1);
+		/* use defaults */
+		*brr = 255;
+		*srr = 15;
+		*cks = 0;
+	}
+}
+
 static void sci_reset(struct uart_port *port)
 {
 	struct plat_sci_reg *reg;
@@ -1821,6 +1889,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	struct plat_sci_reg *reg;
 	unsigned int baud, smr_val, max_baud, cks;
 	int t = -1;
+	unsigned int srr;
 
 	/*
 	 * earlyprintk comes here early on with port->uartclk set to zero.
@@ -1833,8 +1902,17 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	max_baud = port->uartclk ? port->uartclk / 16 : 115200;
 
 	baud = uart_get_baud_rate(port, termios, old, 0, max_baud);
-	if (likely(baud && port->uartclk))
-		t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud, port->uartclk);
+	if (likely(baud && port->uartclk)) {
+		if (s->cfg->scbrr_algo_id == SCBRR_ALGO_6) {
+			sci_baud_calc_hscif(baud, port->uartclk, &t, &srr,
+					    &cks);
+		} else {
+			t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud,
+					   port->uartclk);
+			for (cks = 0; t >= 256 && cks <= 3; cks++)
+				t >>= 2;
+		}
+	}
 
 	sci_port_enable(s);
 
@@ -1853,15 +1931,15 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	uart_update_timeout(port, termios->c_cflag, baud);
 
-	for (cks = 0; t >= 256 && cks <= 3; cks++)
-		t >>= 2;
-
 	dev_dbg(port->dev, "%s: SMR %x, cks %x, t %x, SCSCR %x\n",
 		__func__, smr_val, cks, t, s->cfg->scscr);
 
 	if (t >= 0) {
 		serial_port_out(port, SCSMR, (smr_val & ~3) | cks);
 		serial_port_out(port, SCBRR, t);
+		reg = sci_getreg(port, HSSRR);
+		if (reg->size)
+			serial_port_out(port, HSSRR, srr | HSCIF_SRE);
 		udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
 	} else
 		serial_port_out(port, SCSMR, smr_val);
@@ -1947,6 +2025,8 @@ static const char *sci_type(struct uart_port *port)
 		return "scifa";
 	case PORT_SCIFB:
 		return "scifb";
+	case PORT_HSCIF:
+		return "hscif";
 	}
 
 	return NULL;
@@ -1960,7 +2040,10 @@ static inline unsigned long sci_port_size(struct uart_port *port)
 	 * from platform resource data at such a time that ports begin to
 	 * behave more erratically.
 	 */
-	return 64;
+	if (port->type == PORT_HSCIF)
+		return 96;
+	else
+		return 64;
 }
 
 static int sci_remap_port(struct uart_port *port)
@@ -2085,6 +2168,9 @@ static int sci_init_single(struct platform_device *dev,
 	case PORT_SCIFB:
 		port->fifosize = 256;
 		break;
+	case PORT_HSCIF:
+		port->fifosize = 128;
+		break;
 	case PORT_SCIFA:
 		port->fifosize = 64;
 		break;
@@ -2325,7 +2411,7 @@ static inline int sci_probe_earlyprintk(struct platform_device *pdev)
 #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
 
 static char banner[] __initdata =
-	KERN_INFO "SuperH SCI(F) driver initialized\n";
+	KERN_INFO "SuperH (H)SCI(F) driver initialized\n";
 
 static struct uart_driver sci_uart_driver = {
 	.owner		= THIS_MODULE,
@@ -2484,4 +2570,4 @@ module_exit(sci_exit);
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:sh-sci");
 MODULE_AUTHOR("Paul Mundt");
-MODULE_DESCRIPTION("SuperH SCI(F) serial driver");
+MODULE_DESCRIPTION("SuperH (H)SCI(F) serial driver");
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index eb763ad..d340497 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -5,7 +5,7 @@
 #include <linux/sh_dma.h>
 
 /*
- * Generic header for SuperH SCI(F) (used by sh/sh64/h8300 and related parts)
+ * Generic header for SuperH (H)SCI(F) (used by sh/sh64/h8300 and related parts)
  */
 
 #define SCIx_NOT_SUPPORTED	(-1)
@@ -16,6 +16,7 @@ enum {
 	SCBRR_ALGO_3,		/* (((clk * 2) + 16 * bps) / (16 * bps) - 1) */
 	SCBRR_ALGO_4,		/* (((clk * 2) + 16 * bps) / (32 * bps) - 1) */
 	SCBRR_ALGO_5,		/* (((clk * 1000 / 32) / bps) - 1) */
+	SCBRR_ALGO_6,		/* HSCIF variable sample rate algorithm */
 };
 
 #define SCSCR_TIE	(1 << 7)
@@ -37,7 +38,7 @@ enum {
 
 #define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
 
-/* SCxSR SCIF */
+/* SCxSR SCIF, HSCIF */
 #define SCIF_ER    0x0080
 #define SCIF_TEND  0x0040
 #define SCIF_TDFE  0x0020
@@ -55,6 +56,9 @@ enum {
 #define SCSPTR_SPB2IO	(1 << 1)
 #define SCSPTR_SPB2DT	(1 << 0)
 
+/* HSSRR HSCIF */
+#define HSCIF_SRE	0x8000
+
 /* Offsets into the sci_port->irqs array */
 enum {
 	SCIx_ERI_IRQ,
@@ -90,6 +94,7 @@ enum {
 	SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
 	SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 	SCIx_SH7705_SCIF_REGTYPE,
+	SCIx_HSCIF_REGTYPE,
 
 	SCIx_NR_REGTYPES,
 };
@@ -115,6 +120,7 @@ enum {
 	SCSMR, SCBRR, SCSCR, SCxSR,
 	SCFCR, SCFDR, SCxTDR, SCxRDR,
 	SCLSR, SCTFDR, SCRFDR, SCSPTR,
+	HSSRR,
 
 	SCIx_NR_REGS,
 };
@@ -137,7 +143,7 @@ struct plat_sci_port {
 	unsigned long	mapbase;		/* resource base */
 	unsigned int	irqs[SCIx_NR_IRQS];	/* ERI, RXI, TXI, BRI */
 	unsigned int	gpios[SCIx_NR_FNS];	/* SCK, RXD, TXD, CTS, RTS */
-	unsigned int	type;			/* SCI / SCIF / IRDA */
+	unsigned int	type;			/* SCI / SCIF / IRDA / HSCIF */
 	upf_t		flags;			/* UPF_* flags */
 	unsigned long	capabilities;		/* Port features/capabilities */
 
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 74c2bf7..26eee07 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -226,4 +226,7 @@
 /* Rocketport EXPRESS/INFINITY */
 #define PORT_RP2	102
 
+/* SH-SCI */
+#define PORT_HSCIF	103
+
 #endif /* _UAPILINUX_SERIAL_CORE_H */
-- 
1.7.10.4

[PATCH 1/2] serial: sh-sci: HSCIF support

[Arnd Bergmann]

On Monday 17 June 2013, Simon Horman wrote:
> -       if (likely(baud && port->uartclk))
> -               t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud, port->uartclk);
> +       if (likely(baud && port->uartclk)) {
> +               if (s->cfg->scbrr_algo_id == SCBRR_ALGO_6) {
> +                       sci_baud_calc_hscif(baud, port->uartclk, &t, &srr,
> +                                           &cks);
> +               } else {
> +                       t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud,
> +                                          port->uartclk);
> +                       for (cks = 0; t >= 256 && cks <= 3; cks++)
> +                               t >>= 2;
> +               }
> +       }


This hunk causes build warnings in linux-next now:

/git/arm-soc/drivers/tty/serial/sh-sci.c: In function 'sci_set_termios':
/git/arm-soc/drivers/tty/serial/sh-sci.c:1942:37: warning: 'srr' may be used uninitialized in this function [-Wmaybe-uninitialized]
    serial_port_out(port, HSSRR, srr | HSCIF_SRE);
                                     ^
/git/arm-soc/drivers/tty/serial/sh-sci.c:1892:15: note: 'srr' was declared here
  unsigned int srr;
               ^
/git/arm-soc/drivers/tty/serial/sh-sci.c:1938:47: warning: 'cks' may be used uninitialized in this function [-Wmaybe-uninitialized]
   serial_port_out(port, SCSMR, (smr_val & ~3) | cks);
                                               ^
/git/arm-soc/drivers/tty/serial/sh-sci.c:1890:40: note: 'cks' was declared here
  unsigned int baud, smr_val, max_baud, cks;
                                        ^

	Arnd

[PATCH 1/2] serial: sh-sci: HSCIF support

[Simon Horman]

On Mon, Jun 17, 2013 at 02:54:48PM +0200, Arnd Bergmann wrote:
> On Monday 17 June 2013, Simon Horman wrote:
> > -       if (likely(baud && port->uartclk))
> > -               t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud, port->uartclk);
> > +       if (likely(baud && port->uartclk)) {
> > +               if (s->cfg->scbrr_algo_id == SCBRR_ALGO_6) {
> > +                       sci_baud_calc_hscif(baud, port->uartclk, &t, &srr,
> > +                                           &cks);
> > +               } else {
> > +                       t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud,
> > +                                          port->uartclk);
> > +                       for (cks = 0; t >= 256 && cks <= 3; cks++)
> > +                               t >>= 2;
> > +               }
> > +       }
> 
> 
> This hunk causes build warnings in linux-next now:
> 
> /git/arm-soc/drivers/tty/serial/sh-sci.c: In function 'sci_set_termios':
> /git/arm-soc/drivers/tty/serial/sh-sci.c:1942:37: warning: 'srr' may be used uninitialized in this function [-Wmaybe-uninitialized]
>     serial_port_out(port, HSSRR, srr | HSCIF_SRE);
>                                      ^
> /git/arm-soc/drivers/tty/serial/sh-sci.c:1892:15: note: 'srr' was declared here
>   unsigned int srr;
>                ^
> /git/arm-soc/drivers/tty/serial/sh-sci.c:1938:47: warning: 'cks' may be used uninitialized in this function [-Wmaybe-uninitialized]
>    serial_port_out(port, SCSMR, (smr_val & ~3) | cks);
>                                                ^
> /git/arm-soc/drivers/tty/serial/sh-sci.c:1890:40: note: 'cks' was declared here
>   unsigned int baud, smr_val, max_baud, cks;

Ulrich, could you please look into this?

[PATCH 1/2] serial: sh-sci: HSCIF support

[Ulrich Hecht]

On Tue, Jun 18, 2013 at 3:19 AM, Simon Horman <horms@verge.net.au> wrote:
>> This hunk causes build warnings in linux-next now:
>>
>> /git/arm-soc/drivers/tty/serial/sh-sci.c: In function 'sci_set_termios':
>> /git/arm-soc/drivers/tty/serial/sh-sci.c:1942:37: warning: 'srr' may be used uninitialized in this function [-Wmaybe-uninitialized]
>>     serial_port_out(port, HSSRR, srr | HSCIF_SRE);
>>                                      ^
>> /git/arm-soc/drivers/tty/serial/sh-sci.c:1892:15: note: 'srr' was declared here
>>   unsigned int srr;
>>                ^
>> /git/arm-soc/drivers/tty/serial/sh-sci.c:1938:47: warning: 'cks' may be used uninitialized in this function [-Wmaybe-uninitialized]
>>    serial_port_out(port, SCSMR, (smr_val & ~3) | cks);
>>                                                ^
>> /git/arm-soc/drivers/tty/serial/sh-sci.c:1890:40: note: 'cks' was declared here
>>   unsigned int baud, smr_val, max_baud, cks;
>
> Ulrich, could you please look into this?

Hmmm... I get this warning with gcc 4.5, 4.6, and 4.8. Apparently gcc
4.7 is the only one that does not warn about this. Guess what I'm
using... :(

This is of course trivially fixed, but I have completely lost track of
the transmogrifications this patch has been subjected to. What's the
procedure?

CU
Uli

[PATCH 1/2] serial: sh-sci: HSCIF support

[Simon Horman]

On Wed, Jun 19, 2013 at 10:46:51AM +0200, Ulrich Hecht wrote:
> On Tue, Jun 18, 2013 at 3:19 AM, Simon Horman <horms@verge.net.au> wrote:
> >> This hunk causes build warnings in linux-next now:
> >>
> >> /git/arm-soc/drivers/tty/serial/sh-sci.c: In function 'sci_set_termios':
> >> /git/arm-soc/drivers/tty/serial/sh-sci.c:1942:37: warning: 'srr' may be used uninitialized in this function [-Wmaybe-uninitialized]
> >>     serial_port_out(port, HSSRR, srr | HSCIF_SRE);
> >>                                      ^
> >> /git/arm-soc/drivers/tty/serial/sh-sci.c:1892:15: note: 'srr' was declared here
> >>   unsigned int srr;
> >>                ^
> >> /git/arm-soc/drivers/tty/serial/sh-sci.c:1938:47: warning: 'cks' may be used uninitialized in this function [-Wmaybe-uninitialized]
> >>    serial_port_out(port, SCSMR, (smr_val & ~3) | cks);
> >>                                                ^
> >> /git/arm-soc/drivers/tty/serial/sh-sci.c:1890:40: note: 'cks' was declared here
> >>   unsigned int baud, smr_val, max_baud, cks;
> >
> > Ulrich, could you please look into this?
> 
> Hmmm... I get this warning with gcc 4.5, 4.6, and 4.8. Apparently gcc
> 4.7 is the only one that does not warn about this. Guess what I'm
> using... :(
> 
> This is of course trivially fixed, but I have completely lost track of
> the transmogrifications this patch has been subjected to. What's the
> procedure?

Hi Ulrich,

perhaps the best way forward would be for you to post an incremental patch
on top of either the sh-sci branch or renesas-next-20130618 tag of
my renesas tree on kernel.org.

[PATCH 1/2] serial: sh-sci: HSCIF support

[Arnd Bergmann]

On Wednesday 19 June 2013, Simon Horman wrote:
> > This is of course trivially fixed, but I have completely lost track of
> > the transmogrifications this patch has been subjected to. What's the
> > procedure?
> 
> Hi Ulrich,
> 
> perhaps the best way forward would be for you to post an incremental patch
> on top of either the sh-sci branch or renesas-next-20130618 tag of
> my renesas tree on kernel.org.

I'm not sure where we stand on this series at the moment. Should
I pull v3, has Olof already pulled it, or should I wait for an
update?

	Arnd

[PATCH 1/2] serial: sh-sci: HSCIF support

[Simon Horman]

On Wed, Jun 19, 2013 at 05:08:46PM +0200, Arnd Bergmann wrote:
> On Wednesday 19 June 2013, Simon Horman wrote:
> > > This is of course trivially fixed, but I have completely lost track of
> > > the transmogrifications this patch has been subjected to. What's the
> > > procedure?
> > 
> > Hi Ulrich,
> > 
> > perhaps the best way forward would be for you to post an incremental patch
> > on top of either the sh-sci branch or renesas-next-20130618 tag of
> > my renesas tree on kernel.org.
> 
> I'm not sure where we stand on this series at the moment. Should
> I pull v3, has Olof already pulled it, or should I wait for an
> update?

Hi Arnd,

my preference is for you to wait for an update.

In order to move things forwards I will post a proposed
fix shortly. I believe that the warnings are for conditions
that can never occur and thus in my patch I will propose initialising the
variables that are flagged as being used uninitialised.

[PATCH 2/2] ARM: shmobile: r8a7790: don't use external clock for SCIFs

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht@gmail.com>

This is an external component and may or may not be there, while the
internal clock always works.

Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7790.c |   16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 49de2d5..6531f3d 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -64,10 +64,18 @@ void __init r8a7790_pinmux_init(void)
 [index] = {						\
 	SCIF_COMMON(PORT_SCIF, baseaddr, irq),		\
 	.scbrr_algo_id	= SCBRR_ALGO_2,			\
-	.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
 }
 
-enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1 };
+#define HSCIF_DATA(index, baseaddr, irq)		\
+[index] = {						\
+	SCIF_COMMON(PORT_HSCIF, baseaddr, irq),		\
+	.scbrr_algo_id	= SCBRR_ALGO_6,			\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
+}
+
+enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
+       HSCIF0, HSCIF1 };
 
 static const struct plat_sci_port scif[] = {
 	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
@@ -78,6 +86,8 @@ static const struct plat_sci_port scif[] = {
 	SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */
 	SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */
 	SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */
+	HSCIF_DATA(HSCIF0, 0xe62c0000, gic_spi(154)), /* HSCIF0 */
+	HSCIF_DATA(HSCIF1, 0xe62c8000, gic_spi(155)), /* HSCIF1 */
 };
 
 static inline void r8a7790_register_scif(int idx)
@@ -115,6 +125,8 @@ void __init r8a7790_add_standard_devices(void)
 	r8a7790_register_scif(SCIFA2);
 	r8a7790_register_scif(SCIF0);
 	r8a7790_register_scif(SCIF1);
+	r8a7790_register_scif(HSCIF0);
+	r8a7790_register_scif(HSCIF1);
 	r8a7790_register_irqc(0);
 }
 
-- 
1.7.10.4

[GIT PULL 0/2 v2] Renesas sh-sci updates for v3.11

[Simon Horman]

Sorry, please ignore this, I realised that I have made an error when
applying the second patch.

On Mon, Jun 17, 2013 at 12:38:45PM +0900, Simon Horman wrote:
> Hi Olof, Hi Arnd,
> 
> As requested the first patch is now includes an ack from Greg Kroah-Hartman.
> 
> I have included the r8a7790 change in this patch as it
> depends on the first change in the pull-request but nothing else.
> 
> This pull request will cause some conflicts though I believe all
> of them are not difficult to resolve. The renesas-next-20130613 tag in
> my tree illustrates how I have handled the conflicts with
> both changes already in arm-soc and changes I intend to send
> pull requests for in the near future.
> 
> The following changes since commit c7788792a5e7b0d5d7f96d0766b4cb6112d47d75:
> 
>   Linux 3.10-rc2 (2013-05-20 14:37:38 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-sh-sci-for-v3.11
> 
> for you to fetch changes up to fe0b1091e41e0acae8ddf2da2a5a36b6867ff012:
> 
>   ARM: shmobile: r8a7790: don't use external clock for SCIFs (2013-06-17 12:17:48 +0900)
> 
> ----------------------------------------------------------------
> Renesas sh-sci updates for v3.11
> 
> HSCIF support by Ulrich Hecht.
> 
> ----------------------------------------------------------------
> Ulrich Hecht (2):
>       serial: sh-sci: HSCIF support
>       ARM: shmobile: r8a7790: don't use external clock for SCIFs
> 
>  arch/arm/mach-shmobile/setup-r8a7790.c |   16 ++++-
>  drivers/tty/serial/sh-sci.c            |  102 +++++++++++++++++++++++++++++---
>  include/linux/serial_sci.h             |   12 +++-
>  include/uapi/linux/serial_core.h       |    3 +
>  4 files changed, 120 insertions(+), 13 deletions(-)
>