OMAP4430 failure to boot

[tony@atomide.com (Tony Lindgren)]

* Russell King - ARM Linux <linux@arm.linux.org.uk> [130619 01:42]:
> On Tue, Jun 18, 2013 at 11:43:07PM -0700, Tony Lindgren wrote:
> > * Russell King - ARM Linux <linux@arm.linux.org.uk> [130618 11:40]:
> > > So... the boot and build system last night managed to build its kernels
> > > after I dropped a couple of patches from my kernel, but we've gone from
> > > having both the 3430LDP and 4430SDP booting to only the 3430LDP.
> > > 
> > > Something has broken 4430SDP during the last week, and so far I've no
> > > idea what.  The 4430 seems to be utterly immune to any kind of debugging.
> > > It:
> > > 
> > > (a) doesn't produce any decompressor output because its part of the
> > > multiplatform kernel.  This means I've no idea if the decompressor is
> > > working or not.
> > > 
> > > (b) doesn't produce any output from the kernel via the use of printch()
> > > in the early assembly, nor via adding printascii() into printk().
> > > 
> > > Will has tested v3.10-rc6, and that works.  Will tested v3.10-rc6 plus
> > > arm-soc for-next, and got:
> > > 
> > > 	Error: unrecognized/unsupported machine ID (r1 = 0x00000ae7).
> > 
> > It's because it's DT only. I guess we could have some minimal generic
> > file handling that machine ID to produce an error to avoid having
> > to debug things?
> > 
> > If you have arm-soc for-next, omap4 is now DT only. So you have to
> > have CONFIG_ARM_APPENDED_DTB=y, CONFIG_ARM_ATAG_DTB_COMPAT=y and
> > CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND=y and append the .dtb to
> > zImage to boot. Or you can also update u-boot to pass the .dtb.
> > There are more accurate instructions in arm-soc commit b42b9181.
> > 
> > Moving omap4 to be DT only has been about 5900 lines of reduced data
> > and code so far, so that's a good reason for doing it. Most things
> > should work as earlier, except for the pandaboard EHCI is still missing
> > a fix for adding a clock alias for the auxclk. If there are things not
> > working, they should be quite easy to fix.
> 
> Right, so as I said I'm taking OMAP4 out of the build/boot test system,
> which can't currently cope with jumping through the hoops to get DT to
> work.

OK too bad, but hopefully it can get added back once your setup
can deal with it.
 
> And since no one tells me anything about where to get updated uboots from
> for TI's boards, I'm not about to play boot loader roulette trying to
> build my own.

The mainline u-boot should work, I have not yet updated mine though as
I want to be sure things work with older bootloaders too with appended
DTB.

Regards,

Tony