From mboxrd@z Thu Jan  1 00:00:00 1970
From: arnd@arndb.de (Arnd Bergmann)
Date: Thu, 20 Jun 2013 12:16:36 +0200
Subject: [PATCH V6 3/3] ARM: dts: Add pcie controller node for Samsung
 EXYNOS5440 SoC
In-Reply-To: <00c501ce6d8f$af1bf900$0d53eb00$@samsung.com>
References: <00c201ce6d85$83b072a0$8b1157e0$@samsung.com>
 <3250954.dVh4O1LchK@flatron> <00c501ce6d8f$af1bf900$0d53eb00$@samsung.com>
Message-ID: <201306201216.37248.arnd@arndb.de>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Thursday 20 June 2013, Jingoo Han wrote:
> 2. patch adding label to the pinctrl node (which is a prerequisite) and
>     board-specific properties of PCIe nodes.
>    [PATCH] ARM: dts: Add pcie controller node for exynos5440-ssdk5440
> 
> arch/arm/boot/dts/exynos5440-ssdk5440.dts
> +
> +       pcie0 at 290000 {
> +               reset-gpio = <&pin_ctrl 5 0>;
> +       };
> +
> +       pcie1 at 2a0000 {
> +               reset-gpio = <&pin_ctrl 22 0>;
> +       };
> 
> arch/arm/boot/dts/exynos5440.dtsi
> -       pinctrl {
> +       pin_ctrl: pinctrl {
> 

Note that you don't really have to use a label, you can also refer
to the pinctrl node by its full path, which is just "/pinctrl"
or "/pinctrl at e0000".

	Arnd