From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Wed, 26 Jun 2013 17:16:10 +0200 Subject: [PATCH 3/3] ARM: mxs: dt: Add Crystalfontz CFA-10058 device tree In-Reply-To: <1372258347-18422-4-git-send-email-alexandre.belloni@free-electrons.com> References: <1372258347-18422-1-git-send-email-alexandre.belloni@free-electrons.com> <1372258347-18422-4-git-send-email-alexandre.belloni@free-electrons.com> Message-ID: <20130626151610.GE5803@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Alexandre, On Wed, Jun 26, 2013 at 04:52:27PM +0200, Alexandre Belloni wrote: > From: Brian Lilly > > The CFA-10057 is a breakout board for the CFA-10036 that has Ethernet, USB and a > 5" LCD screen on it. > > Signed-off-by: Brian Lilly > Signed-off-by: Alexandre Belloni > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/imx28-cfa10058.dts | 183 +++++++++++++++++++++++++++++++++++ > 2 files changed, 184 insertions(+) > create mode 100644 arch/arm/boot/dts/imx28-cfa10058.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index d494f37..ddd6f32 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -133,6 +133,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ > imx28-cfa10055.dtb \ > imx28-cfa10056.dtb \ > imx28-cfa10057.dtb \ > + imx28-cfa10058.dtb \ > imx28-evk.dtb \ > imx28-m28evk.dtb \ > imx28-sps1.dtb \ > diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts > new file mode 100644 > index 0000000..438e042 > --- /dev/null > +++ b/arch/arm/boot/dts/imx28-cfa10058.dts > @@ -0,0 +1,183 @@ > +/* > + * Copyright 2013 Crystalfontz America, Inc. > + * Copyright 2012 Free Electrons > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +/* > + * The CFA-100587 is an expansion board for the CFA-10036 module, thus we ^ typo > + * need to include the CFA-10036 DTS. > + */ > +/include/ "imx28-cfa10036.dts" > + > +/ { > + model = "Crystalfontz CFA-10058 Board"; > + compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28"; > + > + apb at 80000000 { > + apbh at 80000000 { > + pinctrl at 80018000 { > + pinctrl-names = "default", "default"; > + pinctrl-1 = <&hog_pins_cfa10058 > + &hog_pins_cfa10058_pullup>; > + > + hog_pins_cfa10058: hog-10058 at 0 { > + reg = <0>; > + fsl,pinmux-ids = < > + 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ > + 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ > + >; > + fsl,drive-strength = <0>; > + fsl,voltage = <1>; > + fsl,pull-up = <0>; > + }; > + > + hog_pins_cfa10058_pullup: hog-10058-pullup at 0 { > + reg = <0>; > + fsl,pinmux-ids = < > + 0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */ > + 0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */ > + 0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */ > + 0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */ > + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ > + >; > + fsl,drive-strength = <0>; > + fsl,voltage = <1>; > + fsl,pull-up = <1>; > + }; As said in the previous mail, these pins don't seem to be used anywhere. You should remove that node. > + spi3_pins_cfa10058: spi3-cfa10058 at 0 { > + reg = <0>; > + fsl,pinmux-ids = < > + 0x0183 /* MX28_PAD_GPMI_RDN__GPIO_0_24 */ > + 0x01c3 /* MX28_PAD_GPMI_RESETN__GPIO_0_28 */ > + 0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */ > + 0x01a3 /* MX28_PAD_GPMI_ALE__GPIO_0_26 */ > + 0x01b3 /* MX28_PAD_GPMI_CLE__GPIO_0_27 */ > + >; > + fsl,drive-strength = <1>; > + fsl,voltage = <1>; > + fsl,pull-up = <1>; > + }; > + > + lcdif_pins_cfa10058: lcdif-evk at 0 { > + reg = <0>; > + fsl,pinmux-ids = < > + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ > + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ > + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ > + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ > + >; > + fsl,drive-strength = <0>; > + fsl,voltage = <1>; > + fsl,pull-up = <0>; > + }; > + }; > + > + lcdif at 80030000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&lcdif_24bit_pins_a > + &lcdif_pins_cfa10058>; > + display = <&display>; > + status = "okay"; > + > + display: display { > + bits-per-pixel = <32>; > + bus-width = <24>; > + > + display-timings { > + native-mode = <&timing0>; > + timing0: timing0 { > + clock-frequency = <30000000>; > + hactive = <800>; > + vactive = <480>; > + hback-porch = <40>; > + hfront-porch = <40>; > + vback-porch = <13>; > + vfront-porch = <29>; > + hsync-len = <8>; > + vsync-len = <8>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <1>; > + }; > + }; > + }; > + }; > + }; > + > + apbx at 80040000 { > + lradc at 80050000 { > + fsl,lradc-touchscreen-wires = <4>; > + status = "okay"; > + }; > + > + pwm: pwm at 80064000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pwm3_pins_b>; > + status = "okay"; > + }; > + > + i2c1: i2c at 8005a000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c1_pins_a>; > + status = "okay"; > + }; Unused i2c bus on this board. > + usbphy1: usbphy at 8007e000 { > + status = "okay"; > + }; > + }; > + }; > + > + ahb at 80080000 { > + usb1: usb at 80090000 { > + vbus-supply = <®_usb1_vbus>; > + pinctrl-0 = <&usbphy1_pins_a>; > + pinctrl-names = "default"; > + status = "okay"; > + }; > + }; > + > + regulators { > + compatible = "simple-bus"; > + > + reg_usb1_vbus: usb1_vbus { > + compatible = "regulator-fixed"; > + regulator-name = "usb1_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gpio0 7 1>; > + }; > + }; > + > + ahb at 80080000 { > + mac0: ethernet at 800f0000 { > + phy-mode = "rmii"; > + pinctrl-names = "default"; > + pinctrl-0 = <&mac0_pins_a>; > + phy-reset-gpios = <&gpio2 21 0>; > + phy-reset-duration = <100>; > + status = "okay"; > + }; > + }; > + > + backlight { > + compatible = "pwm-backlight"; > + pwms = <&pwm 3 5000000>; > + brightness-levels = <0 4 8 16 32 64 128 255>; > + default-brightness-level = <6>; > + }; > + > + fiq { > + compatible = "crystalfontz,cfa10049-fiq"; > + interrupts = <50>; > + }; Again, out-of-tree driver :) Thanks, Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: