From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Sat, 29 Jun 2013 09:13:33 +0200 Subject: [PATCHv3 2/8] ARM: mxs: dt: Add Crystalfontz CFA-10056 device tree In-Reply-To: <1372424577-8279-3-git-send-email-alexandre.belloni@free-electrons.com> References: <1372424577-8279-1-git-send-email-alexandre.belloni@free-electrons.com> <1372424577-8279-3-git-send-email-alexandre.belloni@free-electrons.com> Message-ID: <20130629071333.GH2593@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Jun 28, 2013 at 03:02:51PM +0200, Alexandre Belloni wrote: > From: Brian Lilly > > The CFA-10056 is a breakout board for the CFA-10036, and is > basically a CFA-10037, with a 4.3" screen. > > Signed-off-by: Brian Lilly > Signed-off-by: Alexandre Belloni > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/imx28-cfa10056.dts | 120 +++++++++++++++++++++++++++++++++++ > 2 files changed, 121 insertions(+) > create mode 100644 arch/arm/boot/dts/imx28-cfa10056.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 641b3c9..da75139 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -143,6 +143,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ > imx28-cfa10037.dtb \ > imx28-cfa10049.dtb \ > imx28-cfa10055.dtb \ > + imx28-cfa10056.dtb \ > imx28-cfa10057.dtb \ > imx28-evk.dtb \ > imx28-m28evk.dtb \ > diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts > new file mode 100644 > index 0000000..0f66c40 > --- /dev/null > +++ b/arch/arm/boot/dts/imx28-cfa10056.dts > @@ -0,0 +1,120 @@ > +/* > + * Copyright 2013 Free Electrons > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +/* > + * The CFA-10056 is an expansion board for the CFA-10036 module, thus we > + * need to include the CFA-10036 DTS. > + */ > +/include/ "imx28-cfa10037.dts" The comment is wrong here. You say that you need to include the 10036 DTS, while you actually include the 10037 one. > + > +/ { > + model = "Crystalfontz CFA-10056 Board"; > + compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10036", "fsl,imx28"; Adding the cfa10037 compatible here would probably make sense as well. Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: