* [PATCH 00/02] ARM: shmobile: r8a7790 arch timer frequency update
@ 2013-07-09 12:50 Magnus Damm
2013-07-09 12:50 ` [PATCH 01/02] ARM: shmobile: Introduce r8a7790_read_mode_pins() Magnus Damm
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: Magnus Damm @ 2013-07-09 12:50 UTC (permalink / raw)
To: linux-arm-kernel
ARM: shmobile: r8a7790 arch timer frequency update
[PATCH 01/02] ARM: shmobile: Introduce r8a7790_read_mode_pins()
[PATCH 02/02] ARM: shmobile: Setup r8a7790 arch timer based on MD pins
Add code to setup r8a7790 arch timer frequency dynamically at boot time
based on the EXTAL frequency pointed out by the boot mode pins.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
Built on top of renesas-next-20130704v2
arch/arm/mach-shmobile/clock-r8a7790.c | 11 ----
arch/arm/mach-shmobile/include/mach/r8a7790.h | 3 +
arch/arm/mach-shmobile/setup-r8a7790.c | 63 +++++++++++++++++++++++--
3 files changed, 63 insertions(+), 14 deletions(-)
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 01/02] ARM: shmobile: Introduce r8a7790_read_mode_pins()
2013-07-09 12:50 [PATCH 00/02] ARM: shmobile: r8a7790 arch timer frequency update Magnus Damm
@ 2013-07-09 12:50 ` Magnus Damm
2013-07-09 12:57 ` Sergei Shtylyov
2013-07-09 12:50 ` [PATCH 02/02] ARM: shmobile: Setup r8a7790 arch timer based on MD pins Magnus Damm
2013-07-10 1:23 ` [PATCH 00/02] ARM: shmobile: r8a7790 arch timer frequency update Simon Horman
2 siblings, 1 reply; 10+ messages in thread
From: Magnus Damm @ 2013-07-09 12:50 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm@opensource.se>
Break out the r8a7790 boot mode code into a separate
function so it can be shared by multiple users.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/arm/mach-shmobile/clock-r8a7790.c | 11 ++---------
arch/arm/mach-shmobile/include/mach/r8a7790.h | 3 +++
arch/arm/mach-shmobile/setup-r8a7790.c | 14 ++++++++++++++
3 files changed, 19 insertions(+), 9 deletions(-)
--- 0001/arch/arm/mach-shmobile/clock-r8a7790.c
+++ work/arch/arm/mach-shmobile/clock-r8a7790.c 2013-07-09 20:03:09.000000000 +0900
@@ -24,6 +24,7 @@
#include <linux/clkdev.h>
#include <mach/clock.h>
#include <mach/common.h>
+#include <mach/r8a7790.h>
/*
* MD EXTAL PLL0 PLL1 PLL3
@@ -42,8 +43,6 @@
* see "p1 / 2" on R8A7790_CLOCK_ROOT() below
*/
-#define MD(nr) (1 << nr)
-
#define CPG_BASE 0xe6150000
#define CPG_LEN 0x1000
@@ -53,7 +52,6 @@
#define SMSTPCR5 0xe6150144
#define SMSTPCR7 0xe615014c
-#define MODEMR 0xE6160060
#define SDCKCR 0xE6150074
#define SD2CKCR 0xE6150078
#define SD3CKCR 0xE615007C
@@ -288,14 +286,9 @@ static struct clk_lookup lookups[] = {
void __init r8a7790_clock_init(void)
{
- void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
- u32 mode;
+ u32 mode = r8a7790_read_mode_pins();
int k, ret = 0;
- BUG_ON(!modemr);
- mode = ioread32(modemr);
- iounmap(modemr);
-
switch (mode & (MD(14) | MD(13))) {
case 0:
R8A7790_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88);
--- 0001/arch/arm/mach-shmobile/include/mach/r8a7790.h
+++ work/arch/arm/mach-shmobile/include/mach/r8a7790.h 2013-07-09 20:02:34.000000000 +0900
@@ -8,4 +8,7 @@ void r8a7790_pinmux_init(void);
void r8a7790_init_delay(void);
void r8a7790_timer_init(void);
+#define MD(nr) BIT(nr)
+u32 r8a7790_read_mode_pins(void);
+
#endif /* __ASM_R8A7790_H__ */
--- 0001/arch/arm/mach-shmobile/setup-r8a7790.c
+++ work/arch/arm/mach-shmobile/setup-r8a7790.c 2013-07-09 19:59:37.000000000 +0900
@@ -201,6 +201,20 @@ void __init r8a7790_add_standard_devices
r8a7790_register_thermal();
}
+#define MODEMR 0xe6160060
+
+u32 __init r8a7790_read_mode_pins(void)
+{
+ void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
+ u32 mode;
+
+ BUG_ON(!modemr);
+ mode = ioread32(modemr);
+ iounmap(modemr);
+
+ return mode;
+}
+
void __init r8a7790_timer_init(void)
{
void __iomem *cntcr;
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 02/02] ARM: shmobile: Setup r8a7790 arch timer based on MD pins
2013-07-09 12:50 [PATCH 00/02] ARM: shmobile: r8a7790 arch timer frequency update Magnus Damm
2013-07-09 12:50 ` [PATCH 01/02] ARM: shmobile: Introduce r8a7790_read_mode_pins() Magnus Damm
@ 2013-07-09 12:50 ` Magnus Damm
2013-07-10 1:23 ` [PATCH 00/02] ARM: shmobile: r8a7790 arch timer frequency update Simon Horman
2 siblings, 0 replies; 10+ messages in thread
From: Magnus Damm @ 2013-07-09 12:50 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm@opensource.se>
Update the r8a7790 arch timer setup code to configure the
frequency dynamically at boot time. This means that the arch
timer driver will be able to detect a timer frequency that
has been calculated based on the MD pins instead of a fixed
and potentially incorrect 13 MHz.
With this patch applied the Linux kernel will correctly
support the r8a7790 Lager board that uses a 20 Mhz EXTAL.
The arch timer will operate on 10 MHz and the Linux arch
timer driver will be correctly configured to use 10 MHz.
Without this patch the 20 MHz EXTAL will be used to drive
the arch timer at 10 MHz, but the Linux arch timer driver
will believe it is counting at 13 Mhz.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/arm/mach-shmobile/setup-r8a7790.c | 49 ++++++++++++++++++++++++++++----
1 file changed, 44 insertions(+), 5 deletions(-)
--- 0006/arch/arm/mach-shmobile/setup-r8a7790.c
+++ work/arch/arm/mach-shmobile/setup-r8a7790.c 2013-07-09 21:29:18.000000000 +0900
@@ -215,14 +215,53 @@ u32 __init r8a7790_read_mode_pins(void)
return mode;
}
+#define CNTCR 0
+#define CNTFID0 0x20
+
void __init r8a7790_timer_init(void)
{
- void __iomem *cntcr;
+#ifdef CONFIG_ARM_ARCH_TIMER
+ u32 mode = r8a7790_read_mode_pins();
+ void __iomem *base;
+ int extal_mhz = 0;
+ u32 freq;
+
+ /* At Linux boot time the r8a7790 arch timer comes up
+ * with the counter disabled. Moreover, it may also report
+ * a potentially incorrect fixed 13 MHz frequency. To be
+ * correct these registers need to be updated to use the
+ * frequency EXTAL / 2 which can be determined by the MD pins.
+ */
+
+ switch (mode & (MD(14) | MD(13))) {
+ case 0:
+ extal_mhz = 15;
+ break;
+ case MD(13):
+ extal_mhz = 20;
+ break;
+ case MD(14):
+ extal_mhz = 26;
+ break;
+ case MD(13) | MD(14):
+ extal_mhz = 30;
+ break;
+ }
+
+ /* The arch timer frequency equals EXTAL / 2 */
+ freq = extal_mhz * (1000000 / 2);
+
+ /* Remap "armgcnt address map" space */
+ base = ioremap(0xe6080000, PAGE_SIZE);
+
+ /* Update registers with correct frequency */
+ iowrite32(freq, base + CNTFID0);
+ asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
- /* make sure arch timer is started by setting bit 0 of CNTCT */
- cntcr = ioremap(0xe6080000, PAGE_SIZE);
- iowrite32(1, cntcr);
- iounmap(cntcr);
+ /* make sure arch timer is started by setting bit 0 of CNTCR */
+ iowrite32(1, base + CNTCR);
+ iounmap(base);
+#endif /* CONFIG_ARM_ARCH_TIMER */
shmobile_timer_init();
}
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 01/02] ARM: shmobile: Introduce r8a7790_read_mode_pins()
2013-07-09 12:50 ` [PATCH 01/02] ARM: shmobile: Introduce r8a7790_read_mode_pins() Magnus Damm
@ 2013-07-09 12:57 ` Sergei Shtylyov
2013-07-09 13:05 ` Magnus Damm
0 siblings, 1 reply; 10+ messages in thread
From: Sergei Shtylyov @ 2013-07-09 12:57 UTC (permalink / raw)
To: linux-arm-kernel
Hello.
On 09-07-2013 16:50, Magnus Damm wrote:
> From: Magnus Damm <damm@opensource.se>
> Break out the r8a7790 boot mode code into a separate
> function so it can be shared by multiple users.
> Signed-off-by: Magnus Damm <damm@opensource.se>
> ---
[...]
> --- 0001/arch/arm/mach-shmobile/setup-r8a7790.c
> +++ work/arch/arm/mach-shmobile/setup-r8a7790.c 2013-07-09 19:59:37.000000000 +0900
> @@ -201,6 +201,20 @@ void __init r8a7790_add_standard_devices
> r8a7790_register_thermal();
> }
>
> +#define MODEMR 0xe6160060
> +
> +u32 __init r8a7790_read_mode_pins(void)
> +{
> + void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
Why ioremap the whole page if you only need 4 bytes, and the address
is not aligned to page?
> + u32 mode;
> +
> + BUG_ON(!modemr);
> + mode = ioread32(modemr);
> + iounmap(modemr);
> +
> + return mode;
> +}
> +
WBR, Sergei
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 01/02] ARM: shmobile: Introduce r8a7790_read_mode_pins()
2013-07-09 12:57 ` Sergei Shtylyov
@ 2013-07-09 13:05 ` Magnus Damm
2013-07-10 1:23 ` Simon Horman
0 siblings, 1 reply; 10+ messages in thread
From: Magnus Damm @ 2013-07-09 13:05 UTC (permalink / raw)
To: linux-arm-kernel
Hi Sergei,
On Tue, Jul 9, 2013 at 9:57 PM, Sergei Shtylyov
<sergei.shtylyov@cogentembedded.com> wrote:
> Hello.
>
>
> On 09-07-2013 16:50, Magnus Damm wrote:
>
>> From: Magnus Damm <damm@opensource.se>
>
>
>> Break out the r8a7790 boot mode code into a separate
>> function so it can be shared by multiple users.
>
>
>> Signed-off-by: Magnus Damm <damm@opensource.se>
>> ---
>
>
> [...]
>
>
>> --- 0001/arch/arm/mach-shmobile/setup-r8a7790.c
>> +++ work/arch/arm/mach-shmobile/setup-r8a7790.c 2013-07-09
>> 19:59:37.000000000 +0900
>> @@ -201,6 +201,20 @@ void __init r8a7790_add_standard_devices
>> r8a7790_register_thermal();
>> }
>>
>> +#define MODEMR 0xe6160060
>> +
>> +u32 __init r8a7790_read_mode_pins(void)
>> +{
>> + void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
>
>
> Why ioremap the whole page if you only need 4 bytes, and the address is
> not aligned to page?
Because the original code did so. =)
But yes, indeed, using two pages seems kind of pointless.
/ magnus
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 01/02] ARM: shmobile: Introduce r8a7790_read_mode_pins()
2013-07-09 13:05 ` Magnus Damm
@ 2013-07-10 1:23 ` Simon Horman
0 siblings, 0 replies; 10+ messages in thread
From: Simon Horman @ 2013-07-10 1:23 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jul 09, 2013 at 10:05:15PM +0900, Magnus Damm wrote:
> Hi Sergei,
>
> On Tue, Jul 9, 2013 at 9:57 PM, Sergei Shtylyov
> <sergei.shtylyov@cogentembedded.com> wrote:
> > Hello.
> >
> >
> > On 09-07-2013 16:50, Magnus Damm wrote:
> >
> >> From: Magnus Damm <damm@opensource.se>
> >
> >
> >> Break out the r8a7790 boot mode code into a separate
> >> function so it can be shared by multiple users.
> >
> >
> >> Signed-off-by: Magnus Damm <damm@opensource.se>
> >> ---
> >
> >
> > [...]
> >
> >
> >> --- 0001/arch/arm/mach-shmobile/setup-r8a7790.c
> >> +++ work/arch/arm/mach-shmobile/setup-r8a7790.c 2013-07-09
> >> 19:59:37.000000000 +0900
> >> @@ -201,6 +201,20 @@ void __init r8a7790_add_standard_devices
> >> r8a7790_register_thermal();
> >> }
> >>
> >> +#define MODEMR 0xe6160060
> >> +
> >> +u32 __init r8a7790_read_mode_pins(void)
> >> +{
> >> + void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
> >
> >
> > Why ioremap the whole page if you only need 4 bytes, and the address is
> > not aligned to page?
>
> Because the original code did so. =)
>
> But yes, indeed, using two pages seems kind of pointless.
Lets fix that up in another patch, it seems orthogonal to this change.
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 00/02] ARM: shmobile: r8a7790 arch timer frequency update
2013-07-09 12:50 [PATCH 00/02] ARM: shmobile: r8a7790 arch timer frequency update Magnus Damm
2013-07-09 12:50 ` [PATCH 01/02] ARM: shmobile: Introduce r8a7790_read_mode_pins() Magnus Damm
2013-07-09 12:50 ` [PATCH 02/02] ARM: shmobile: Setup r8a7790 arch timer based on MD pins Magnus Damm
@ 2013-07-10 1:23 ` Simon Horman
2013-07-10 2:12 ` Magnus Damm
2 siblings, 1 reply; 10+ messages in thread
From: Simon Horman @ 2013-07-10 1:23 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jul 09, 2013 at 09:50:07PM +0900, Magnus Damm wrote:
> ARM: shmobile: r8a7790 arch timer frequency update
>
> [PATCH 01/02] ARM: shmobile: Introduce r8a7790_read_mode_pins()
> [PATCH 02/02] ARM: shmobile: Setup r8a7790 arch timer based on MD pins
>
> Add code to setup r8a7790 arch timer frequency dynamically at boot time
> based on the EXTAL frequency pointed out by the boot mode pins.
>
> Signed-off-by: Magnus Damm <damm@opensource.se>
> ---
>
> Built on top of renesas-next-20130704v2
>
> arch/arm/mach-shmobile/clock-r8a7790.c | 11 ----
> arch/arm/mach-shmobile/include/mach/r8a7790.h | 3 +
> arch/arm/mach-shmobile/setup-r8a7790.c | 63 +++++++++++++++++++++++--
> 3 files changed, 63 insertions(+), 14 deletions(-)
Hi Magnus,
could you please let me know if/when these patches are ready to queue-up
for v3.12?
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 00/02] ARM: shmobile: r8a7790 arch timer frequency update
2013-07-10 1:23 ` [PATCH 00/02] ARM: shmobile: r8a7790 arch timer frequency update Simon Horman
@ 2013-07-10 2:12 ` Magnus Damm
2013-07-10 2:21 ` Simon Horman
0 siblings, 1 reply; 10+ messages in thread
From: Magnus Damm @ 2013-07-10 2:12 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jul 10, 2013 at 10:23 AM, Simon Horman <horms@verge.net.au> wrote:
> On Tue, Jul 09, 2013 at 09:50:07PM +0900, Magnus Damm wrote:
>> ARM: shmobile: r8a7790 arch timer frequency update
>>
>> [PATCH 01/02] ARM: shmobile: Introduce r8a7790_read_mode_pins()
>> [PATCH 02/02] ARM: shmobile: Setup r8a7790 arch timer based on MD pins
>>
>> Add code to setup r8a7790 arch timer frequency dynamically at boot time
>> based on the EXTAL frequency pointed out by the boot mode pins.
>>
>> Signed-off-by: Magnus Damm <damm@opensource.se>
>> ---
>>
>> Built on top of renesas-next-20130704v2
>>
>> arch/arm/mach-shmobile/clock-r8a7790.c | 11 ----
>> arch/arm/mach-shmobile/include/mach/r8a7790.h | 3 +
>> arch/arm/mach-shmobile/setup-r8a7790.c | 63 +++++++++++++++++++++++--
>> 3 files changed, 63 insertions(+), 14 deletions(-)
>
> Hi Magnus,
Hi Simon,
Thanks for your help picking up patches.
> could you please let me know if/when these patches are ready to queue-up
> for v3.12?
There are two things to consider:
1) Patch 1/2 needs to be updated to handle feedback from Sergei.
2) I'd like the series to be tested by Ulrich to see if they actually help!
I can resend 1/2 today or tomorrow and I think Ulrich can most likely
help us with testing sometime this week.
Cheers,
/ magnus
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 00/02] ARM: shmobile: r8a7790 arch timer frequency update
2013-07-10 2:12 ` Magnus Damm
@ 2013-07-10 2:21 ` Simon Horman
2013-07-11 8:40 ` Ulrich Hecht
0 siblings, 1 reply; 10+ messages in thread
From: Simon Horman @ 2013-07-10 2:21 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jul 10, 2013 at 11:12:25AM +0900, Magnus Damm wrote:
> On Wed, Jul 10, 2013 at 10:23 AM, Simon Horman <horms@verge.net.au> wrote:
> > On Tue, Jul 09, 2013 at 09:50:07PM +0900, Magnus Damm wrote:
> >> ARM: shmobile: r8a7790 arch timer frequency update
> >>
> >> [PATCH 01/02] ARM: shmobile: Introduce r8a7790_read_mode_pins()
> >> [PATCH 02/02] ARM: shmobile: Setup r8a7790 arch timer based on MD pins
> >>
> >> Add code to setup r8a7790 arch timer frequency dynamically at boot time
> >> based on the EXTAL frequency pointed out by the boot mode pins.
> >>
> >> Signed-off-by: Magnus Damm <damm@opensource.se>
> >> ---
> >>
> >> Built on top of renesas-next-20130704v2
> >>
> >> arch/arm/mach-shmobile/clock-r8a7790.c | 11 ----
> >> arch/arm/mach-shmobile/include/mach/r8a7790.h | 3 +
> >> arch/arm/mach-shmobile/setup-r8a7790.c | 63 +++++++++++++++++++++++--
> >> 3 files changed, 63 insertions(+), 14 deletions(-)
> >
> > Hi Magnus,
>
> Hi Simon,
>
> Thanks for your help picking up patches.
>
> > could you please let me know if/when these patches are ready to queue-up
> > for v3.12?
>
> There are two things to consider:
> 1) Patch 1/2 needs to be updated to handle feedback from Sergei.
> 2) I'd like the series to be tested by Ulrich to see if they actually help!
>
> I can resend 1/2 today or tomorrow and I think Ulrich can most likely
> help us with testing sometime this week.
Thanks, I'll wait for your repost and feedback from Ulrich.
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 00/02] ARM: shmobile: r8a7790 arch timer frequency update
2013-07-10 2:21 ` Simon Horman
@ 2013-07-11 8:40 ` Ulrich Hecht
0 siblings, 0 replies; 10+ messages in thread
From: Ulrich Hecht @ 2013-07-11 8:40 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jul 10, 2013 at 4:21 AM, Simon Horman <horms@verge.net.au> wrote:
> On Wed, Jul 10, 2013 at 11:12:25AM +0900, Magnus Damm wrote:
>> I can resend 1/2 today or tomorrow and I think Ulrich can most likely
>> help us with testing sometime this week.
>
> Thanks, I'll wait for your repost and feedback from Ulrich.
Works for me, "sleep 10" actually sleeps for 10 seconds now.
Tested-by: Ulrich Hecht <ulrich.hecht@gmail.com>
CU
Uli
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2013-07-11 8:40 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-07-09 12:50 [PATCH 00/02] ARM: shmobile: r8a7790 arch timer frequency update Magnus Damm
2013-07-09 12:50 ` [PATCH 01/02] ARM: shmobile: Introduce r8a7790_read_mode_pins() Magnus Damm
2013-07-09 12:57 ` Sergei Shtylyov
2013-07-09 13:05 ` Magnus Damm
2013-07-10 1:23 ` Simon Horman
2013-07-09 12:50 ` [PATCH 02/02] ARM: shmobile: Setup r8a7790 arch timer based on MD pins Magnus Damm
2013-07-10 1:23 ` [PATCH 00/02] ARM: shmobile: r8a7790 arch timer frequency update Simon Horman
2013-07-10 2:12 ` Magnus Damm
2013-07-10 2:21 ` Simon Horman
2013-07-11 8:40 ` Ulrich Hecht
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).