From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Thu, 11 Jul 2013 18:38:59 +0200 Subject: [PATCH 0/4] A10S-OLinuXino-Micro I2C support In-Reply-To: <1373232719-13050-1-git-send-email-emilio@elopez.com.ar> References: <1373232719-13050-1-git-send-email-emilio@elopez.com.ar> Message-ID: <20130711163859.GX11243@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Emilio, On Sun, Jul 07, 2013 at 06:31:55PM -0300, Emilio L?pez wrote: > Hi, > > This patchset adds the required DT nodes to get I2C supported and > working on the OLIMEX A10S-OLinuXino-Micro board. > > Patch 1 adds the muxings as seen on the board's schematics. Patch 2 adds > the DT nodes, based on other sunxi dts, as we don't have an A10S user > manual so far. Patch 3 enables the controllers, and patch 4 adds a node > for the AT24 EEPROM found on the board. > > I have tested and can see the PMU on I2C-0 using i2cdetect, and can read > the EEPROM contents on I2C-1. I have not tested I2C-2, but i2cdetect > reports no devices so I suppose it's working okay too. > > Any testing or review will be appreciated :) > > Thanks, > > Emilio > > Emilio L?pez (4): > ARM: sun5i: dt: Add I2C muxings for sun5i A10S > ARM: sun5i: dt: Add I2C controller nodes to the A10S dtsi > ARM: sun5i: dt: Enable I2C controllers on A10S-OLinuXino-Micro > ARM: sun5i: dt: Add AT24 device on A10S-OLinuXino-Micro > > arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 25 +++++++++++ > arch/arm/boot/dts/sun5i-a10s.dtsi | 54 ++++++++++++++++++++++++ > 2 files changed, 79 insertions(+) Thanks for doing this! Overall, this patchset looks fine. I'll apply it as soon as 3.11-rc1 is out. Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: