From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Mon, 15 Jul 2013 09:59:53 +0200 Subject: [PATCH 0/4] A10S-OLinuXino-Micro I2C support In-Reply-To: <1373232719-13050-1-git-send-email-emilio@elopez.com.ar> References: <1373232719-13050-1-git-send-email-emilio@elopez.com.ar> Message-ID: <20130715075953.GA2962@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Emilio, On Sun, Jul 07, 2013 at 06:31:55PM -0300, Emilio L?pez wrote: > Hi, > > This patchset adds the required DT nodes to get I2C supported and > working on the OLIMEX A10S-OLinuXino-Micro board. > > Patch 1 adds the muxings as seen on the board's schematics. Patch 2 adds > the DT nodes, based on other sunxi dts, as we don't have an A10S user > manual so far. Patch 3 enables the controllers, and patch 4 adds a node > for the AT24 EEPROM found on the board. > > I have tested and can see the PMU on I2C-0 using i2cdetect, and can read > the EEPROM contents on I2C-1. I have not tested I2C-2, but i2cdetect > reports no devices so I suppose it's working okay too. > > Any testing or review will be appreciated :) I just applied them to my sunxi/dt-for-3.12 branch. Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: