From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 10/22] arm/dts: Add support for the cpuimx25 board from Eukrea and its baseboard.
Date: Mon, 15 Jul 2013 23:26:13 +0200 [thread overview]
Message-ID: <20130715212613.GD10995@pengutronix.de> (raw)
In-Reply-To: <1373900227-341-11-git-send-email-denis@eukrea.com>
On Mon, Jul 15, 2013 at 04:56:55PM +0200, Denis Carikli wrote:
> Only the following devices/functionalities were added:
> * Main UART
> * Memory node
> * NAND
> * i2c and its pcf8563
> * Ethernet
> * LCD controller
> * Sound
> * ESDHC
>
> Signed-off-by: Denis Carikli <denis@eukrea.com>
> ---
> Documentation/devicetree/bindings/arm/fsl.txt | 4 ++
> arch/arm/boot/dts/eukrea_cpuimx25.dts | 48 +++++++++++++++++
> arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi | 59 +++++++++++++++++++++
> 3 files changed, 111 insertions(+)
> create mode 100644 arch/arm/boot/dts/eukrea_cpuimx25.dts
> create mode 100644 arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi
>
> diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
> index e935d7d..2c19348 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.txt
> +++ b/Documentation/devicetree/bindings/arm/fsl.txt
> @@ -9,6 +9,10 @@ i.MX25 Product Development Kit
> Required root node properties:
> - compatible = "fsl,imx25-pdk", "fsl,imx25";
>
> +i.MX25 Eukrea CPUIMX25 Board.
> +Required root node properties:
> + - compatible = "fsl,eukrea_cpuimx25", "fsl,imx25";
> +
> i.MX27 Product Development Kit
> Required root node properties:
> - compatible = "fsl,imx27-pdk", "fsl,imx27";
> diff --git a/arch/arm/boot/dts/eukrea_cpuimx25.dts b/arch/arm/boot/dts/eukrea_cpuimx25.dts
Currently all i.MX (and most other SoCs aswell) dts files start with the
SoC prefix, so this file should be named imx25-eukrea-cpuimx25.dts.
> +/dts-v1/;
> +#include "imx25.dtsi"
> +#include "eukrea_mbimxsd25-baseboard.dtsi"
Same here.
> +
> +/ {
> + model = "Eukrea CPUIMX25";
> + compatible = "fsl,eukrea_cpuimx25", "fsl,imx25";
As Fabio mentioned in another patch: eukrea,cpuimx25
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2013-07-15 21:26 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-15 14:56 Devicetree support for Eukrea cpuimx{25,35,51} Denis Carikli
2013-07-15 14:56 ` [PATCH 01/22] ARM i.MX25: devicetree: add compatible property for imxfb support Denis Carikli
2013-07-15 21:16 ` Sascha Hauer
2013-07-15 21:22 ` Fabio Estevam
2013-07-15 14:56 ` [PATCH 02/22] arm/dts: imx25.dtsi: Add an alias for the LCD controller Denis Carikli
2013-07-15 14:56 ` [PATCH 03/22] pinctrl: pinctrl-imx: add imx25 pinctrl driver Denis Carikli
2013-07-16 7:46 ` Shawn Guo
2013-09-05 13:04 ` Fabio Estevam
2013-09-05 13:10 ` Eric Bénard
2013-07-15 14:56 ` [PATCH 04/22] arm/dts: imx25.dtsi: Add some pinmux pins Denis Carikli
2013-07-16 7:49 ` Shawn Guo
2013-07-15 14:56 ` [PATCH 05/22] ARM: i.MX25 DT: use auxdata to attach imxfb_platform_data Denis Carikli
2013-07-15 21:19 ` Sascha Hauer
2013-07-15 14:56 ` [PATCH 06/22] arm/dts: i.MX25: Add ssi clocks and DMA events Denis Carikli
2013-07-15 21:20 ` Sascha Hauer
2013-07-16 8:17 ` Shawn Guo
2013-07-15 14:56 ` [PATCH 07/22] arm/dts: i.MX25: Add sdma script path Denis Carikli
2013-07-16 8:37 ` Shawn Guo
2013-07-15 14:56 ` [PATCH 08/22] ASoC: eukrea-tlv320: Add DT support Denis Carikli
2013-07-16 8:40 ` Shawn Guo
2013-07-15 14:56 ` [PATCH 09/22] arm/dts: imx25.dtsi: Add an alias for the Audio Multiplexer Denis Carikli
2013-07-15 14:56 ` [PATCH 10/22] arm/dts: Add support for the cpuimx25 board from Eukrea and its baseboard Denis Carikli
2013-07-15 21:26 ` Sascha Hauer [this message]
2013-07-16 8:47 ` Shawn Guo
2013-07-15 14:56 ` [PATCH 11/22] arm/dts: imx51.dtsi: i2c1 : Add pinctrl configuration Denis Carikli
2013-07-15 14:56 ` [PATCH 12/22] video: backlight: Add GPIO Backlight driver Denis Carikli
2013-07-16 8:49 ` Shawn Guo
2013-07-15 14:56 ` [PATCH 13/22] lcd: Add GPIO LCD driver Denis Carikli
2013-07-15 15:30 ` Alexander Shiyan
2013-07-15 16:14 ` Fabio Estevam
2013-07-15 14:56 ` [PATCH 14/22] staging: imx-drm: use of_get_display_timings Denis Carikli
2013-07-15 14:57 ` [PATCH 15/22] drm: Add the lacking DRM_MODE_FLAG_* for matching the DISPLAY_FLAGS_* Denis Carikli
2013-07-15 21:30 ` Sascha Hauer
2013-07-15 14:57 ` [PATCH 16/22] staging: drm/imx: ipuv3-crtc: don't harcode some mode flags Denis Carikli
2013-07-15 14:57 ` [PATCH 17/22] [media] v4l2: add new V4L2_PIX_FMT_RGB666 pixel format Denis Carikli
2013-07-15 14:57 ` [PATCH 18/22] staging: video: imx: Add RGB666 support for parallel display Denis Carikli
2013-07-15 18:27 ` Fabio Estevam
2013-07-15 14:57 ` [PATCH 19/22] Input: tsc2007: Add device tree support Denis Carikli
2013-07-15 16:08 ` Fabio Estevam
2013-07-15 21:43 ` Sascha Hauer
2013-07-15 14:57 ` [PATCH 20/22] arm/dts: Add support for the cpuimx51 board from Eukrea and its baseboard Denis Carikli
2013-07-15 18:10 ` Fabio Estevam
2013-07-15 14:57 ` [PATCH 21/22] DT: Add basic support for imx35-based devices Denis Carikli
2013-07-15 15:19 ` Alexander Shiyan
2013-07-15 21:50 ` Sascha Hauer
2013-07-15 14:57 ` [PATCH 22/22] arm/dts: Add support for the cpuimx35 board from Eukrea and its baseboard Denis Carikli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130715212613.GD10995@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).