From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/5] iio: at91: Use different prescal, startup mask in MR for different IP
Date: Wed, 17 Jul 2013 17:40:10 +0200 [thread overview]
Message-ID: <20130717154010.GB21549@lukather> (raw)
In-Reply-To: <51E651D5.7050906@atmel.com>
Hi Nicolas,
On Wed, Jul 17, 2013 at 10:12:05AM +0200, Nicolas Ferre wrote:
> On 15/07/2013 14:58, Maxime Ripard :
> >On Sun, Jul 14, 2013 at 04:04:26PM +0800, Josh Wu wrote:
> >>+/*
> >>+ * Since atmel adc support different ip for touchscreen mode. Through the
> >>+ * IP check, we will know the touchscreen capbilities.
> >>+ */
> >>+static void atmel_adc_get_cap(struct at91_adc_state *st)
> >>+{
> >>+ unsigned int version;
> >>+ struct iio_dev *idev = iio_priv_to_dev(st);
> >>+
> >>+ version = at91_adc_readl(st, AT91_ADC_VERSION);
> >>+ dev_dbg(&idev->dev, "version: 0x%x\n", version);
> >>+
> >>+ st->caps.mr_prescal_mask = AT91_ADC_PRESCAL_9260;
> >>+ st->caps.mr_startup_mask = AT91_ADC_STARTUP_9260;
> >>+
> >>+ /* keep only major version number */
> >>+ switch (version & 0xf00) {
> >>+ case 0x500: /* SAMA5D3 */
> >>+ case 0x400: /* AT91SAM9X5/9N12 */
> >>+ st->caps.has_tsmr = 1;
> >>+ st->caps.mr_startup_mask = AT91_ADC_STARTUP;
> >>+ case 0x200: /* AT91SAM9M10/9G45 */
> >>+ st->caps.mr_prescal_mask = AT91_ADC_PRESCAL;
> >>+
> >>+ if ((version & 0xf00) == 0x200)
> >>+ st->caps.mr_startup_mask = AT91_ADC_STARTUP_9G45;
> >>+ case 0x100: /* AT91SAM9260/9G20 */
> >>+ break;
> >>+ default:
> >>+ dev_warn(&idev->dev,
> >>+ "Unmanaged adc version, use minimal capabilities\n");
> >>+ break;
> >>+ };
> >>+}
> >
> >Why don't you use different compatible names and derive your
> >capabilities from which compatible is declared.
>
> Do not forget that we still have a handful of platforms that do not
> support DT (and never will).
You can do pretty much the same thing with board-file-probed device
drivers, using the id_table field of the platform_driver structure and
use the driver_data field of the associated platform_device_id array to
store the needed values.
(see for example drivers/gpio/gpio-mxs.c)
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130717/71912aca/attachment-0001.sig>
next prev parent reply other threads:[~2013-07-17 15:40 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-14 8:04 [PATCH 0/5] iio: at91: Add touch screen support in at91 adc Josh Wu
2013-07-14 8:04 ` [PATCH 1/5] iio: at91: use adc_clk_khz to make the calculation not easy to large than u32 Josh Wu
2013-07-15 12:52 ` Maxime Ripard
2013-07-16 7:54 ` Josh Wu
2013-07-14 8:04 ` [PATCH 2/5] iio: at91: Use different prescal, startup mask in MR for different IP Josh Wu
2013-07-15 12:58 ` Maxime Ripard
2013-07-16 8:35 ` Josh Wu
2013-07-16 8:46 ` Nicolas Ferre
2013-07-16 11:20 ` Maxime Ripard
2013-07-16 11:30 ` Thomas Petazzoni
2013-07-16 19:03 ` Jonathan Cameron
2013-07-16 19:17 ` Thomas Petazzoni
2013-07-17 8:23 ` Nicolas Ferre
2013-07-17 8:12 ` Nicolas Ferre
2013-07-17 9:07 ` Josh Wu
2013-07-17 15:40 ` Maxime Ripard [this message]
2013-07-17 7:58 ` Nicolas Ferre
2013-07-17 10:09 ` Josh Wu
2013-07-20 9:35 ` Jonathan Cameron
2013-07-14 8:04 ` [PATCH 3/5] iio: at91: ADC start-up time calculation changed since at91sam9x5 Josh Wu
2013-07-20 9:39 ` Jonathan Cameron
2013-07-25 7:35 ` Josh Wu
2013-07-14 8:04 ` [PATCH 4/5] iio: at91: add an optional dt property for for adc clock hz Josh Wu
2013-07-15 13:06 ` Maxime Ripard
2013-07-16 7:55 ` Josh Wu
2013-07-16 10:30 ` Maxime Ripard
2013-07-16 11:16 ` Lars-Peter Clausen
2013-07-25 7:29 ` Josh Wu
2013-07-25 12:01 ` boris brezillon
2013-07-25 12:11 ` boris brezillon
2013-07-14 8:04 ` [PATCH 5/5] iio: at91: introduce touch screen support in iio adc driver Josh Wu
2013-07-15 13:15 ` Maxime Ripard
2013-07-16 9:09 ` Josh Wu
2013-07-16 11:43 ` Maxime Ripard
2013-07-20 9:57 ` Jonathan Cameron
2013-07-22 13:17 ` Mark Rutland
2013-07-25 7:56 ` Josh Wu
2013-07-25 16:45 ` Mark Rutland
2013-08-06 10:24 ` Josh Wu
2013-08-08 13:40 ` Mark Rutland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130717154010.GB21549@lukather \
--to=maxime.ripard@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).