From: horms@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: Mainline kernel on snowball
Date: Thu, 25 Jul 2013 14:23:17 +0900 [thread overview]
Message-ID: <20130725052317.GA25854@verge.net.au> (raw)
Hi,
I apologise for the na?ve nature of this question,
but I do not seem to be able to make any progress of my own accord.
I would like to boot the mainline kernel - ideally v3.10 and v3.11-rcX -
on snowball. The reason being to verify CPU hotplug which
seems to be broken on shmobile, though that is tangential to this post.
My procedure, which does not work, is as follows.
I have tried a number of different versions all with roughly
the same result.
1. Build kernel
# git checkout v3.10.2 # I have tried several over versions too.
# make u8500_defconfig
Edit .config to enable CONFIG_ARM_APPENDED_DTB
# LOADADDR=0x100000 make uImage dtbs
2. Append dtb to zImage and recreate uImage
mv arch/arm/boot/zImage arch/arm/boot/zImage.tmp
cat arch/arm/boot/zImage.tmp arch/arm/boot/dts/snowball.dtb
/bin/sh scripts/mkuboot.sh \
-A arm -O linux -C none -T kernel \
-a 0x100000 -e 0x100000 -n 'Linux-3.10.2' \
-d arch/arm/boot/zImage arch/arm/boot/uImage
3. Boot uImage from u-boot
Snowball $ setenv ethaddr 3e:c4:73:05:d1:a1
Snowball $ bootp;bootm
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 3e:c4:73:05:d1:a1
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 28
*** Unhandled DHCP Option in OFFER/ACK: 44
*** Unhandled DHCP Option in OFFER/ACK: 28
*** Unhandled DHCP Option in OFFER/ACK: 44
DHCP client bound to address 10.3.3.146
Using smc911x-0 device
TFTP from server 10.3.3.135; our IP address is 10.3.3.146
Filename 'snowball/uImage'.
Load address: 0x100000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
##########################################################
done
Bytes transferred = 2540191 (26c29f hex)
## Booting kernel from Legacy Image at 00100000 ...
Image Name: 'Linux-3.10.2'
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2540127 Bytes = 2.4 MB
Load Address: 00100000
Entry Point: 00100000
XIP Kernel Image ... OK
OK
Starting kernel ...
This is as far as it gets.
next reply other threads:[~2013-07-25 5:23 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-25 5:23 Simon Horman [this message]
2013-07-25 5:40 ` Mainline kernel on snowball Willy Tarreau
2013-07-25 7:25 ` Simon Horman
2013-07-25 7:52 ` Willy Tarreau
2013-07-25 8:26 ` Simon Horman
2013-07-25 8:36 ` Willy Tarreau
2013-07-25 6:41 ` Uwe Kleine-König
2013-07-25 7:22 ` Simon Horman
2013-07-25 9:27 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130725052317.GA25854@verge.net.au \
--to=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox