[PATCHv1] arm: armada: Add .dts file for Netgear ReadyNAS 102

[jason@lakedaemon.net (Jason Cooper)]

On Thu, Jul 04, 2013 at 11:16:46PM +0200, Arnaud Ebalard wrote:
> 
> All hardware parts of the (Armada 370 based) NETGEAR ReadyNAS 102 are
> supported by mainline kernel (USB 3.0 rear ports, USB 2.0 front port,
> Gigabit controller and PHY, serial port, leds, buttons, SATA ports,
> G762 fan controller) except for:
> 
>  - the Intersil ISL12057 I2C RTC Chip,
>  - the Armada NAND controller.
> 
> Support for both of those is currently work in progress and does not
> prevent boot.
> 
> Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
> ---
> Hi Jason and Andrew,
> 
> As requested
> 
>  - this version is tested against current head of linus tree (+ I2C
>    fixes for a race condition; for details, see message #94 of
>    http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=622325).
>  - nand layout entry and ISL12057 entry have been removed until support
>    is available in mainline kernel for eahc of those
>  - clock, gpio led and keys have been made siblings of soc, memory and
>    chosen (reported by Sebastian).
> 
> Is it still acceptable for current merge window or am I too late?

Well, for v3.12... ;-)

> Cheers,
> 
> a+
> 
>  arch/arm/boot/dts/Makefile                     |   1 +
>  arch/arm/boot/dts/armada-370-netgear-rn102.dts | 176 +++++++++++++++++++++++++
>  2 files changed, 177 insertions(+)
>  create mode 100644 arch/arm/boot/dts/armada-370-netgear-rn102.dts

Applied to mvebu/dt

thx,

Jason.