linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: mturquette@linaro.org (Mike Turquette)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] clk: exynos5250: Add G2D gate clock
Date: Fri, 26 Jul 2013 13:18:00 -0700	[thread overview]
Message-ID: <20130726201800.7598.54329@quantum> (raw)
In-Reply-To: <1373013749-14530-1-git-send-email-sachin.kamat@linaro.org>

Quoting Sachin Kamat (2013-07-05 01:42:27)
> Adds gate clock for G2D IP for Exynos5250 SoC.
> 
> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
> Cc: Mike Turquette <mturquette@linaro.org>

I've taken patch #1 into clk-next.

> ---
> This patch depends on the following patch:
> http://thread.gmane.org/gmane.linux.kernel.samsung-soc/20581

I think I've gotten all three series you sent out, can you confirm?
http://thread.gmane.org/gmane.linux.kernel.samsung-soc/20581
http://comments.gmane.org/gmane.linux.kernel.samsung-soc/20829
http://comments.gmane.org/gmane.linux.kernel.samsung-soc/20582

Regards,
Mike

> ---
>  .../devicetree/bindings/clock/exynos5250-clock.txt |    1 +
>  drivers/clk/samsung/clk-exynos5250.c               |    5 ++++-
>  2 files changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
> index 1a05761..7e88242 100644
> --- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
> @@ -155,6 +155,7 @@ clock which they consume.
>    dp                   342
>    mixer                        343
>    hdmi                 344
> +  g2d                  345
>  
>  Example 1: An example of a clock controller node is listed below.
>  
> diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
> index 6f767c5..3da0bdf 100644
> --- a/drivers/clk/samsung/clk-exynos5250.c
> +++ b/drivers/clk/samsung/clk-exynos5250.c
> @@ -62,6 +62,7 @@
>  #define SRC_CDREX              0x20200
>  #define PLL_DIV2_SEL           0x20a24
>  #define GATE_IP_DISP1          0x10928
> +#define GATE_IP_ACP            0x10000
>  
>  /*
>   * Let each supported clock get a unique id. This id is used to lookup the clock
> @@ -99,7 +100,7 @@ enum exynos5250_clks {
>         spi2, i2s1, i2s2, pcm1, pcm2, pwm, spdif, ac97, hsi2c0, hsi2c1, hsi2c2,
>         hsi2c3, chipid, sysreg, pmu, cmu_top, cmu_core, cmu_mem, tzpc0, tzpc1,
>         tzpc2, tzpc3, tzpc4, tzpc5, tzpc6, tzpc7, tzpc8, tzpc9, hdmi_cec, mct,
> -       wdt, rtc, tmu, fimd1, mie1, dsim0, dp, mixer, hdmi,
> +       wdt, rtc, tmu, fimd1, mie1, dsim0, dp, mixer, hdmi, g2d,
>  
>         nr_clks,
>  };
> @@ -152,6 +153,7 @@ static __initdata unsigned long exynos5250_clk_regs[] = {
>         SRC_CDREX,
>         PLL_DIV2_SEL,
>         GATE_IP_DISP1,
> +       GATE_IP_ACP,
>  };
>  
>  /* list of all parent clock list */
> @@ -463,6 +465,7 @@ struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
>         GATE(dp, "dp", "aclk200", GATE_IP_DISP1, 4, 0, 0),
>         GATE(mixer, "mixer", "aclk200", GATE_IP_DISP1, 5, 0, 0),
>         GATE(hdmi, "hdmi", "aclk200", GATE_IP_DISP1, 6, 0, 0),
> +       GATE(g2d, "g2d", "aclk200", GATE_IP_ACP, 3, 0, 0),
>  };
>  
>  static __initdata struct of_device_id ext_clk_match[] = {
> -- 
> 1.7.9.5

  parent reply	other threads:[~2013-07-26 20:18 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-05  8:42 [PATCH 1/3] clk: exynos5250: Add G2D gate clock Sachin Kamat
2013-07-05  8:42 ` [PATCH 2/3] of/documentation: Update G2D documentation Sachin Kamat
2013-07-05 23:52   ` Tomasz Figa
2013-07-08  6:36     ` Sachin Kamat
2013-07-05  8:42 ` [PATCH 3/3] ARM: EXYNOS: Add G2D support to exynos5250 Sachin Kamat
2013-07-31  5:52   ` Kukjin Kim
2013-07-26  8:48 ` [PATCH 1/3] clk: exynos5250: Add G2D gate clock Sachin Kamat
2013-07-26 20:18 ` Mike Turquette [this message]
2013-07-27 13:29   ` Sachin Kamat
2013-07-30  6:48     ` Mike Turquette
2013-07-30  6:55       ` Sachin Kamat
2013-07-31  3:42         ` Mike Turquette
2013-07-31  3:48           ` Sachin Kamat

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130726201800.7598.54329@quantum \
    --to=mturquette@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).