From: mark.rutland@arm.com (Mark Rutland)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 04/10] ARM: sun6i: Add restart code for the A31
Date: Mon, 29 Jul 2013 15:04:31 +0100 [thread overview]
Message-ID: <20130729140430.GA25264@e106331-lin.cambridge.arm.com> (raw)
In-Reply-To: <1374618312-19001-5-git-send-email-maxime.ripard@free-electrons.com>
On Tue, Jul 23, 2013 at 11:25:06PM +0100, Maxime Ripard wrote:
> The Allwinner A31 has a sligthly different watchdog that requires a
> different restart code.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
> arch/arm/mach-sunxi/sunxi.c | 37 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
>
> diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
> index 11326d9..c18ef3a 100644
> --- a/arch/arm/mach-sunxi/sunxi.c
> +++ b/arch/arm/mach-sunxi/sunxi.c
> @@ -32,6 +32,15 @@
> #define SUN4I_WATCHDOG_MODE_ENABLE (1 << 0)
> #define SUN4I_WATCHDOG_MODE_RESET_ENABLE (1 << 1)
>
> +#define SUN6I_WATCHDOG1_IRQ_REG 0x00
> +#define SUN6I_WATCHDOG1_CTRL_REG 0x10
> +#define SUN6I_WATCHDOG1_CTRL_RESTART (1 << 0)
> +#define SUN6I_WATCHDOG1_CONFIG_REG 0x14
> +#define SUN6I_WATCHDOG1_CONFIG_RESTART (1 << 0)
> +#define SUN6I_WATCHDOG1_CONFIG_IRQ (1 << 1)
> +#define SUN6I_WATCHDOG1_MODE_REG 0x18
> +#define SUN6I_WATCHDOG1_MODE_ENABLE (1 << 0)
> +
> static void __iomem *wdt_base;
>
> static void sun4i_restart(enum reboot_mode mode, const char *cmd)
> @@ -56,8 +65,36 @@ static void sun4i_restart(enum reboot_mode mode, const char *cmd)
> }
> }
>
> +static void sun6i_restart(char mode, const char *cmd)
> +{
> + if (!wdt_base)
> + return;
> +
> + /* Disable interrupts */
> + writel(0, wdt_base + SUN6I_WATCHDOG1_IRQ_REG);
> +
> + /* We want to disable the IRQ and just reset the whole system */
> + writel(SUN6I_WATCHDOG1_CONFIG_RESTART,
> + wdt_base + SUN6I_WATCHDOG1_CONFIG_REG);
> +
> + /* Enable timer. The default and lowest interval value is 0.5s */
> + writel(SUN6I_WATCHDOG1_MODE_ENABLE,
> + wdt_base + SUN6I_WATCHDOG1_MODE_REG);
> +
> + /* Restart the watchdog. */
> + writel(SUN6I_WATCHDOG1_CTRL_RESTART,
> + wdt_base + SUN6I_WATCHDOG1_CTRL_REG);
> +
> + while (1) {
> + mdelay(5);
> + writel(SUN6I_WATCHDOG1_MODE_ENABLE,
> + wdt_base + SUN6I_WATCHDOG1_MODE_REG);
> + }
> +}
> +
> static struct of_device_id sunxi_restart_ids[] = {
> { .compatible = "allwinner,sun4i-wdt", .data = sun4i_restart },
> + { .compatible = "allwinner,sun6i-wdt", .data = sun6i_restart },
Is there a corresponding binding document addition?
sun4i-wdt.txt could be turned into a more general sunxi-wdt.txt.
Thanks,
Mark.
next prev parent reply other threads:[~2013-07-29 14:04 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-23 22:25 [PATCH 00/10] ARM: sunxi: Add support for the Allwinner A31 SoC Maxime Ripard
2013-07-23 22:25 ` [PATCH 01/10] irqchip: GIC: Add Cortex-A7 compatible string Maxime Ripard
2013-07-23 22:25 ` [PATCH 02/10] clk: sunxi: fix initialization of basic clocks Maxime Ripard
2013-07-23 22:25 ` [PATCH 03/10] ARM: sunxi: Add the Allwinner A31 compatible to the machine definition Maxime Ripard
2013-07-26 10:35 ` Thomas Petazzoni
2013-07-26 12:22 ` Maxime Ripard
2013-07-23 22:25 ` [PATCH 04/10] ARM: sun6i: Add restart code for the A31 Maxime Ripard
2013-07-26 10:35 ` Thomas Petazzoni
2013-07-26 12:23 ` Maxime Ripard
2013-07-29 14:04 ` Mark Rutland [this message]
2013-07-30 12:44 ` Maxime Ripard
2013-07-23 22:25 ` [PATCH 05/10] ARM: sunxi: Add Allwinner A31 DTSI Maxime Ripard
2013-07-26 10:37 ` Thomas Petazzoni
2013-07-26 12:48 ` Maxime Ripard
2013-07-29 14:11 ` Mark Rutland
2013-07-30 8:59 ` Marc Zyngier
2013-07-30 13:18 ` Maxime Ripard
2013-07-23 22:25 ` [PATCH 06/10] ARM: sun6i: Add WITS Colombus A31 evaluation kit support Maxime Ripard
2013-07-23 22:25 ` [PATCH 07/10] pinctrl: sunxi: Add Allwinner A31 pins set Maxime Ripard
2013-07-29 16:20 ` Linus Walleij
2013-07-30 9:00 ` Maxime Ripard
2013-07-23 22:25 ` [PATCH 08/10] ARM: sunxi: dt: Add PIO controller to A31 DTSI Maxime Ripard
2013-07-26 10:39 ` Thomas Petazzoni
2013-07-23 22:25 ` [PATCH 09/10] ARM: sun6i: Add UART0 muxing options Maxime Ripard
2013-07-23 22:25 ` [PATCH 10/10] ARM: sun6i: colombus: Add uart0 muxing Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130729140430.GA25264@e106331-lin.cambridge.arm.com \
--to=mark.rutland@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).