From: mgr@pengutronix.de (Michael Grzeschik)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v13 03/14] usb: chipidea: imx: add return value check for devm_regulator_get
Date: Tue, 30 Jul 2013 00:47:17 +0200 [thread overview]
Message-ID: <20130729224717.GB7109@pengutronix.de> (raw)
In-Reply-To: <1374830310-21765-4-git-send-email-peter.chen@freescale.com>
On Fri, Jul 26, 2013 at 05:18:19PM +0800, Peter Chen wrote:
> - If devm_regulator_get returns -EPROBE_DEFER, we also return
> -EPROBE_DEFER to wait regulator being ready later.
> - If devm_regulator_get returns -ENODEV, we think there is
> no "vbus-supply" node at DT, it means this board doesn't need
> vbus control.
> - If devm_regulator_get returns other error values, it means
> there are something wrong for getting this regulator.
>
> Signed-off-by: Peter Chen <peter.chen@freescale.com>
> ---
> drivers/usb/chipidea/ci_hdrc_imx.c | 14 ++++++++++++--
> 1 files changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
> index d06355e..0ced8c1 100644
> --- a/drivers/usb/chipidea/ci_hdrc_imx.c
> +++ b/drivers/usb/chipidea/ci_hdrc_imx.c
> @@ -144,8 +144,18 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
>
> /* Get the vbus regulator */
> pdata.reg_vbus = devm_regulator_get(&pdev->dev, "vbus");
> - if (IS_ERR(pdata.reg_vbus))
> - pdata.reg_vbus = NULL;
> + if (PTR_ERR(pdata.reg_vbus) == -EPROBE_DEFER) {
> + ret = -EPROBE_DEFER;
> + goto err_clk;
> + } else if (PTR_ERR(pdata.reg_vbus) == -ENODEV) {
> + pdata.reg_vbus = NULL; /* no vbus regualator is needed */
> + } else if (IS_ERR(pdata.reg_vbus)) {
> + dev_err(&pdev->dev,
> + "Getting regulator error: %ld\n",
> + PTR_ERR(pdata.reg_vbus));
> + ret = PTR_ERR(pdata.reg_vbus);
> + goto err_clk;
> + }
>
> if (!pdev->dev.dma_mask)
> pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
> --
This is wrong, you should squash that into the previous patch. And
as already mentioned, this can probably go into core.c as well.
Pick up the habit *not* to change code in one series which another patch
of the same series introduced. This only adds *dusty* unused history in the
patchstack that nobody needs. A *clean* and *coherent* series with discrete
patches is much easier to review and will get accepted much faster.
Michael
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2013-07-29 22:47 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-26 9:18 [PATCH v13 00/14] Add tested id switch and vbus connect detect support for Chipidea Peter Chen
2013-07-26 9:18 ` [PATCH v13 01/14] usb: chipidea: add vbus regulator control Peter Chen
2013-07-26 9:18 ` [PATCH v13 02/14] usb: chipidea: imx: remove vbus regulator operation Peter Chen
2013-07-29 22:30 ` Michael Grzeschik
2013-07-30 1:46 ` Peter Chen
2013-07-26 9:18 ` [PATCH v13 03/14] usb: chipidea: imx: add return value check for devm_regulator_get Peter Chen
2013-07-29 22:47 ` Michael Grzeschik [this message]
2013-07-30 1:50 ` Peter Chen
2013-07-26 9:18 ` [PATCH v13 04/14] usb: chipidea: udc: otg_set_peripheral is useless for some chipidea users Peter Chen
2013-07-26 9:18 ` [PATCH v13 05/14] usb: chipidea: otg: Add otg file used to access otgsc Peter Chen
2013-07-26 9:18 ` [PATCH v13 06/14] usb: chipidea: Add role init and destory APIs Peter Chen
2013-07-26 9:18 ` [PATCH v13 07/14] usb: chipidea: add flag CI_HDRC_DUAL_ROLE_NOT_OTG Peter Chen
2013-07-26 9:18 ` [PATCH v13 08/14] usb: chipidea: disable all interrupts and clear all interrupts status Peter Chen
2013-07-26 9:18 ` [PATCH v13 09/14] usb: chipidea: move otg relate things to otg file Peter Chen
2013-07-26 9:18 ` [PATCH v13 10/14] usb: chipidea: add vbus interrupt handler Peter Chen
2013-07-26 9:18 ` [PATCH v13 11/14] usb: chipidea: add wait vbus lower than OTGSC_BSV before role starts Peter Chen
2013-07-26 9:18 ` [PATCH v13 12/14] usb: chipidea: udc: misuse flag CI_HDRC_REGS_SHARED and CI_HDRC_PULLUP_ON_VBUS Peter Chen
2013-07-26 9:18 ` [PATCH v13 13/14] usb: chipidea: udc: .pullup is valid when vbus is on at CI_HDRC_PULLUP_ON_VBUS Peter Chen
2013-07-26 9:18 ` [PATCH v13 14/14] usb: chipidea: udc: fix the oops when plugs in usb cable after rmmod gadget Peter Chen
2013-07-31 14:14 ` [PATCH v13 00/14] Add tested id switch and vbus connect detect support for Chipidea Chen Peter-B29397
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130729224717.GB7109@pengutronix.de \
--to=mgr@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).