[PATCH v2 1/8] ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs'

[balbi@ti.com (Felipe Balbi)]

Hi,

On Tue, Jul 30, 2013 at 04:55:39PM +0530, Rajendra Nayak wrote:
> @@ -379,6 +407,13 @@ IS_OMAP_TYPE(3430, 0x3430)
>  # define soc_is_omap543x()		is_omap543x()
>  #endif
>  
> +# if defined(CONFIG_SOC_DRA7XX)
> +# undef soc_is_dra7xx
> +# undef soc_is_dra75x
> +# define soc_is_dra7xx()		is_dra7xx()
> +# define soc_is_dra75x()		is_dra75x()

since this platform is DT-only, couldn't we just believe DT-data to be
correct of_machine_is_compatible() ? 2/3 of this patch would be removed.

I patched this for OMAP5 (compile-tested only, no boards available) and
came out with the patch below (still needs to be split):

diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 08b7267..b3136e5 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -13,7 +13,7 @@
 
 / {
 	model = "TI OMAP5 uEVM board";
-	compatible = "ti,omap5-uevm", "ti,omap5";
+	compatible = "ti,omap5-uevm", "ti,omap5432-es2.0", "ti,omap5";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 07be2cd..a7bc906 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -17,7 +17,7 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	compatible = "ti,omap5";
+	compatible = "ti,omap5432-es2.0", "ti,omap5430-es2.0", "ti,omap5";
 	interrupt-parent = <&gic>;
 
 	aliases {
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 2dc62a2..ee94309 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -563,49 +563,6 @@ void __init omap4xxx_check_revision(void)
 	pr_info("%s %s\n", soc_name, soc_rev);
 }
 
-void __init omap5xxx_check_revision(void)
-{
-	u32 idcode;
-	u16 hawkeye;
-	u8 rev;
-
-	idcode = read_tap_reg(OMAP_TAP_IDCODE);
-	hawkeye = (idcode >> 12) & 0xffff;
-	rev = (idcode >> 28) & 0xff;
-	switch (hawkeye) {
-	case 0xb942:
-		switch (rev) {
-		case 0:
-			omap_revision = OMAP5430_REV_ES1_0;
-			break;
-		case 1:
-		default:
-			omap_revision = OMAP5430_REV_ES2_0;
-		}
-		break;
-
-	case 0xb998:
-		switch (rev) {
-		case 0:
-			omap_revision = OMAP5432_REV_ES1_0;
-			break;
-		case 1:
-		default:
-			omap_revision = OMAP5432_REV_ES2_0;
-		}
-		break;
-
-	default:
-		/* Unknown default to latest silicon rev as default*/
-		omap_revision = OMAP5430_REV_ES2_0;
-	}
-
-	sprintf(soc_name, "OMAP%04x", omap_rev() >> 16);
-	sprintf(soc_rev, "ES%d.0", (omap_rev() >> 12) & 0xf);
-
-	pr_info("%s %s\n", soc_name, soc_rev);
-}
-
 /*
  * Set up things for map_io and processor detection later on. Gets called
  * pretty much first thing from board init. For multi-omap, this gets
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 4a3f06f..aa28940 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -633,8 +633,7 @@ void __init omap4430_init_late(void)
 #ifdef CONFIG_SOC_OMAP5
 void __init omap5_init_early(void)
 {
-	omap2_set_globals_tap(OMAP54XX_CLASS,
-			      OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
+	omap2_set_globals_tap(-1, OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
 	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
 				  OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE));
 	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE));
@@ -644,7 +643,6 @@ void __init omap5_init_early(void)
 	omap_prm_base_init();
 	omap_cm_base_init();
 	omap44xx_prm_init();
-	omap5xxx_check_revision();
 	omap54xx_voltagedomains_init();
 	omap54xx_powerdomains_init();
 	omap54xx_clockdomains_init();
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index 8c616e4..b8339ad 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -35,6 +35,7 @@
 #ifndef __ASSEMBLY__
 
 #include <linux/bitops.h>
+#include <linux/of.h>
 
 /*
  * Test if multicore OMAP support is needed
@@ -194,7 +195,6 @@ IS_OMAP_CLASS(24xx, 0x24)
 IS_OMAP_CLASS(34xx, 0x34)
 IS_OMAP_CLASS(44xx, 0x44)
 IS_AM_CLASS(35xx, 0x35)
-IS_OMAP_CLASS(54xx, 0x54)
 IS_AM_CLASS(33xx, 0x33)
 IS_AM_CLASS(43xx, 0x43)
 
@@ -207,7 +207,6 @@ IS_OMAP_SUBCLASS(363x, 0x363)
 IS_OMAP_SUBCLASS(443x, 0x443)
 IS_OMAP_SUBCLASS(446x, 0x446)
 IS_OMAP_SUBCLASS(447x, 0x447)
-IS_OMAP_SUBCLASS(543x, 0x543)
 
 IS_TI_SUBCLASS(816x, 0x816)
 IS_TI_SUBCLASS(814x, 0x814)
@@ -373,10 +372,10 @@ IS_OMAP_TYPE(3430, 0x3430)
 # endif
 
 # if defined(CONFIG_SOC_OMAP5)
-# undef soc_is_omap54xx
-# undef soc_is_omap543x
-# define soc_is_omap54xx()		is_omap54xx()
-# define soc_is_omap543x()		is_omap543x()
+# undef  soc_is_omap54xx
+# undef  soc_is_omap543x
+# define soc_is_omap54xx()		(of_machine_is_compatible("ti,omap5"))
+# define soc_is_omap543x()		(soc_is_omap54xx())
 #endif
 
 /* Various silicon revisions for omap2 */
@@ -437,16 +436,9 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define OMAP447X_CLASS		0x44700044
 #define OMAP4470_REV_ES1_0	(OMAP447X_CLASS | (0x10 << 8))
 
-#define OMAP54XX_CLASS		0x54000054
-#define OMAP5430_REV_ES1_0	(OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
-#define OMAP5430_REV_ES2_0	(OMAP54XX_CLASS | (0x30 << 16) | (0x20 << 8))
-#define OMAP5432_REV_ES1_0	(OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
-#define OMAP5432_REV_ES2_0	(OMAP54XX_CLASS | (0x32 << 16) | (0x20 << 8))
-
 void omap2xxx_check_revision(void);
 void omap3xxx_check_revision(void);
 void omap4xxx_check_revision(void);
-void omap5xxx_check_revision(void);
 void omap3xxx_check_features(void);
 void ti81xx_check_features(void);
 void am33xx_check_features(void);

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130730/dc202606/attachment.sig>