From mboxrd@z Thu Jan 1 00:00:00 1970 From: will.deacon@arm.com (Will Deacon) Date: Fri, 2 Aug 2013 10:53:50 +0100 Subject: [PATCH] ARM: Update SMP_ON_UP code to detect A9MPCore with 1 CPU devices In-Reply-To: <1375381033-13220-1-git-send-email-santosh.shilimkar@ti.com> References: <1375381033-13220-1-git-send-email-santosh.shilimkar@ti.com> Message-ID: <20130802095350.GI2465@mudshark.cambridge.arm.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, Aug 01, 2013 at 07:17:13PM +0100, Santosh Shilimkar wrote: > From: Vaibhav Bedia > > The generic code is well equipped to differentiate between > SMP and UP configurations.However, there are some devices which > use Cortex-A9 MP core IP with 1 CPU as configuration. To let > these SOCs to co-exist in a CONFIG_SMP=y build by leveraging > the SMP_ON_UP support, we need to additionally check the > number the cores in Cortex-A9 MPCore configuration. Without > such a check in place, the startup code tries to execute > ALT_SMP() set of instructions which lead to CPU faults. > > The issue was spotted on TI's Aegis device and this patch > makes now the device work with omap2plus_defconfig which > enables SMP by default. The change is kept limited to only > Cortex-A9 MPCore detection code. > > Cc: Will Deacon > Cc: Russell King > > Acked-by: Sricharan R > Signed-off-by: Vaibhav Bedia > Signed-off-by: Santosh Shilimkar > --- > arch/arm/kernel/head.S | 18 +++++++++++++++++- > 1 file changed, 17 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S > index 9cf6063..4924b11 100644 > --- a/arch/arm/kernel/head.S > +++ b/arch/arm/kernel/head.S > @@ -486,7 +486,23 @@ __fixup_smp: > mrc p15, 0, r0, c0, c0, 5 @ read MPIDR > and r0, r0, #0xc0000000 @ multiprocessing extensions and > teq r0, #0x80000000 @ not part of a uniprocessor system? > - moveq pc, lr @ yes, assume SMP > + bne __fixup_smp_on_up @ no, assume UP > + > + @ Core indicates it is SMP. Check for Aegis SOC where a single > + @ Cortex-A9 CPU is present but SMP operations fault. > + mov r4, #0x41000000 > + orr r4, r4, #0x0000c000 > + orr r4, r4, #0x00000090 > + teq r3, r4 @ Check for ARM Cortex-A9 > + movne pc, lr @ Not ARM Cortex-A9, > + > + mrc p15, 4, r0, c15, c0 @ get SCU base address > + teq r0, #0x0 @ '0' on actual UP A9 hardware > + beq __fixup_smp_on_up @ So its an A9 UP What if somebody builds an MP A9 with the private peripheral base address at 0x0? Will