From: Dave.Martin@arm.com (Dave Martin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: Update SMP_ON_UP code to detect A9MPCore with 1 CPU devices
Date: Fri, 2 Aug 2013 15:18:28 +0100 [thread overview]
Message-ID: <20130802141828.GC2361@localhost.localdomain> (raw)
In-Reply-To: <1375381033-13220-1-git-send-email-santosh.shilimkar@ti.com>
On Thu, Aug 01, 2013 at 02:17:13PM -0400, Santosh Shilimkar wrote:
> From: Vaibhav Bedia <vaibhav.bedia@ti.com>
>
> The generic code is well equipped to differentiate between
> SMP and UP configurations.However, there are some devices which
> use Cortex-A9 MP core IP with 1 CPU as configuration. To let
> these SOCs to co-exist in a CONFIG_SMP=y build by leveraging
> the SMP_ON_UP support, we need to additionally check the
> number the cores in Cortex-A9 MPCore configuration. Without
> such a check in place, the startup code tries to execute
> ALT_SMP() set of instructions which lead to CPU faults.
>
> The issue was spotted on TI's Aegis device and this patch
> makes now the device work with omap2plus_defconfig which
> enables SMP by default. The change is kept limited to only
> Cortex-A9 MPCore detection code.
Is there a specific reason why this can't happen for other processors
such as A5/7/15?
Cheers
---Dave
>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: Russell King <linux@arm.linux.org.uk>
>
> Acked-by: Sricharan R <r.sricharan@ti.com>
> Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> ---
> arch/arm/kernel/head.S | 18 +++++++++++++++++-
> 1 file changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
> index 9cf6063..4924b11 100644
> --- a/arch/arm/kernel/head.S
> +++ b/arch/arm/kernel/head.S
> @@ -486,7 +486,23 @@ __fixup_smp:
> mrc p15, 0, r0, c0, c0, 5 @ read MPIDR
> and r0, r0, #0xc0000000 @ multiprocessing extensions and
> teq r0, #0x80000000 @ not part of a uniprocessor system?
> - moveq pc, lr @ yes, assume SMP
> + bne __fixup_smp_on_up @ no, assume UP
> +
> + @ Core indicates it is SMP. Check for Aegis SOC where a single
> + @ Cortex-A9 CPU is present but SMP operations fault.
> + mov r4, #0x41000000
> + orr r4, r4, #0x0000c000
> + orr r4, r4, #0x00000090
> + teq r3, r4 @ Check for ARM Cortex-A9
> + movne pc, lr @ Not ARM Cortex-A9,
> +
> + mrc p15, 4, r0, c15, c0 @ get SCU base address
> + teq r0, #0x0 @ '0' on actual UP A9 hardware
> + beq __fixup_smp_on_up @ So its an A9 UP
> + ldr r0, [r0, #4] @ read SCU Config
> + and r0, r0, #0x3 @ number of CPUs
> + teq r0, #0x0 @ is 1?
> + movne pc, lr
>
> __fixup_smp_on_up:
> adr r0, 1f
> --
> 1.7.9.5
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2013-08-02 14:18 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-01 18:17 [PATCH] ARM: Update SMP_ON_UP code to detect A9MPCore with 1 CPU devices Santosh Shilimkar
2013-08-02 9:53 ` Will Deacon
2013-08-02 12:32 ` Santosh Shilimkar
2013-08-02 14:18 ` Dave Martin [this message]
2013-08-02 15:18 ` Santosh Shilimkar
2013-08-02 14:45 ` Sudeep KarkadaNagesha
2013-08-02 15:22 ` Santosh Shilimkar
2013-08-02 15:45 ` Sudeep KarkadaNagesha
2013-08-02 15:48 ` Will Deacon
2013-08-12 18:34 ` Santosh Shilimkar
2013-08-13 11:19 ` Will Deacon
2013-08-13 13:31 ` Santosh Shilimkar
2013-08-23 17:08 ` Sekhar Nori
2013-08-23 17:17 ` Santosh Shilimkar
2013-08-23 17:41 ` Sekhar Nori
2013-09-24 17:08 ` Will Deacon
2013-09-24 17:43 ` Santosh Shilimkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130802141828.GC2361@localhost.localdomain \
--to=dave.martin@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).