[PATCH v2 0/8] Common Clock Framework support for Samsung S3C64xx

[mturquette@linaro.org (Mike Turquette)]

Quoting Kukjin Kim (2013-08-05 10:01:36)
> On 07/23/13 08:49, Tomasz Figa wrote:
> > This series is an attempt to move clock support on Samsung S3C64xx SoCs
> > to Common Clock Framework.
> >
> > First, support for PLL types present on S3C64xx SoCs is added to Samsung
> > Common Clock Framework driver. Then the main clock driver for mentioned
> > SoCs is introduced. Further patches contain fixes for drivers to make them
> > compliant with CCF semantics, migration of platform code to use the new
> > clock driver and removal of old clock management code.
> >
> > Depends on:
> >   - [PATCH v4 00/20] Samsung PWM support cleanup
> >     http://thread.gmane.org/gmane.linux.kernel.samsung-soc/20856
> >
> > On S3C6410-based Tiny6410 board (Mini6410-compatible):
> >
> > Tested-by: Tomasz Figa<tomasz.figa@gmail.com>
> >
> > For v1:
> >
> > Acked-by: Mike Turquette<mturquette@linaro.org>
> >
> > Changes since v1:
> >   - added patch for read-only muxes,
> >   - exported configurable muxes and dividers,
> >   - defined mout_syncmux as read-only mux,
> >   - in DT-enabled case fixed-clock binding is used to define external clocks.
> >
> > Tomasz Figa (8):
> >    clk: mux: Add support for read-only muxes.
> >    clk: samsung: pll: Add support for PLL6552 and PLL6553
> >    clk: samsung: Add clock driver for S3C64xx SoCs
> >    ARM: SAMSUNG: Add soc_is_s3c6400/s3c6410 macros
> >    ARM: s3c64xx: dma: Use clk_prepare_enable/clk_disable_unprepare
> >    usb: host: ohci-s3c2410 Use clk_prepare_enable/clk_disable_unprepare
> >    ARM: s3c64xx: Migrate clock handling to Common Clock Framework
> >    ARM: s3c64xx: Remove old clock management code
> >
> >   .../bindings/clock/samsung,s3c64xx-clock.txt       |   77 ++
> >   arch/arm/Kconfig                                   |    2 +-
> >   arch/arm/mach-s3c64xx/Makefile                     |    2 +-
> >   arch/arm/mach-s3c64xx/clock.c                      | 1007 --------------------
> >   arch/arm/mach-s3c64xx/common.c                     |   21 +-
> >   arch/arm/mach-s3c64xx/common.h                     |   12 +-
> >   arch/arm/mach-s3c64xx/dma.c                        |    4 +-
> >   arch/arm/mach-s3c64xx/include/mach/regs-clock.h    |  132 +--
> >   arch/arm/mach-s3c64xx/mach-anw6410.c               |    2 +-
> >   arch/arm/mach-s3c64xx/mach-crag6410.c              |    2 +-
> >   arch/arm/mach-s3c64xx/mach-hmt.c                   |    2 +-
> >   arch/arm/mach-s3c64xx/mach-mini6410.c              |    2 +-
> >   arch/arm/mach-s3c64xx/mach-ncp.c                   |    2 +-
> >   arch/arm/mach-s3c64xx/mach-smartq.c                |   11 +-
> >   arch/arm/mach-s3c64xx/mach-smdk6400.c              |    2 +-
> >   arch/arm/mach-s3c64xx/mach-smdk6410.c              |    2 +-
> >   arch/arm/mach-s3c64xx/pm.c                         |   21 -
> >   arch/arm/mach-s3c64xx/s3c6400.c                    |    6 -
> >   arch/arm/mach-s3c64xx/s3c6410.c                    |    7 -
> >   arch/arm/plat-samsung/include/plat/cpu.h           |    4 +
> >   drivers/clk/clk-mux.c                              |   10 +-
> >   drivers/clk/samsung/Makefile                       |    1 +
> >   drivers/clk/samsung/clk-pll.c                      |  160 ++++
> >   drivers/clk/samsung/clk-pll.h                      |    4 +
> >   drivers/clk/samsung/clk-s3c64xx.c                  |  465 +++++++++
> >   drivers/usb/host/ohci-s3c2410.c                    |    8 +-
> >   include/dt-bindings/clock/samsung,s3c64xx-clock.h  |  178 ++++
> >   include/linux/clk-provider.h                       |    2 +
> >   28 files changed, 943 insertions(+), 1205 deletions(-)
> >   create mode 100644 Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt
> >   delete mode 100644 arch/arm/mach-s3c64xx/clock.c
> >   create mode 100644 drivers/clk/samsung/clk-s3c64xx.c
> >   create mode 100644 include/dt-bindings/clock/samsung,s3c64xx-clock.h
> >
> Basically, this series looks good to me, but I'm not sure how this 
> should be handled because of dependency with PWM cleanup and clk stuff 
> in clk tree now...

Patches 1-3 can go into the clk tree. 4-6 should go through their
respective trees.

If you want I can take 7 & 8 through the clk tree.

Alternatively I can provide patches 1-3 in a separate stable topic
branch for you to pull in as a dependency. We'll both merge that stable
topic branch into our trees and you can make a note of it for the
arm-soc folks.

Regards,
Mike

> 
> - Kukjin