From mboxrd@z Thu Jan 1 00:00:00 1970 From: ezequiel.garcia@free-electrons.com (Ezequiel Garcia) Date: Tue, 6 Aug 2013 13:32:41 -0300 Subject: [PATCH 1/2] ARM: mvebu: add support for the AXP WiFi AP board In-Reply-To: <20130806155343.GU19280@titan.lakedaemon.net> References: <1375199091-31215-1-git-send-email-thomas.petazzoni@free-electrons.com> <1375199091-31215-2-git-send-email-thomas.petazzoni@free-electrons.com> <20130806155343.GU19280@titan.lakedaemon.net> Message-ID: <20130806163240.GB2705@localhost> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Aug 06, 2013 at 11:53:43AM -0400, Jason Cooper wrote: > Ezequiel, > > On Tue, Jul 30, 2013 at 05:44:50PM +0200, Thomas Petazzoni wrote: > > The AXP WiFi AP board is a Marvell platform based on the Armada XP > > MV78230 SoC. It has two mini-PCIe connectors, one USB 3.0 port powered > > by a USB 3.0 controller on PCIe, two Ethernet ports, 1 GB of RAM, 1 GB > > of NAND, 16 MB of SPI flash, one SATA port and one button, two UARTs > > > > Successfully tested: USB 3.0 port, the mini-PCIe connectors, SPI > > flash, Ethernet ports, SATA port, button, UART. > > > > Untested: NAND flash, due to lack of mainline support for the Armada > > 370/XP NAND controller for now. > > > > Signed-off-by: Thomas Petazzoni > > --- > > arch/arm/boot/dts/Makefile | 1 + > > arch/arm/boot/dts/armada-xp-axpwifiap.dts | 164 ++++++++++++++++++++++++++++++ > > 2 files changed, 165 insertions(+) > > create mode 100644 arch/arm/boot/dts/armada-xp-axpwifiap.dts > > When I merge this code with your MBus series I get the following > warning: > > DTC arch/arm/boot/dts/armada-xp-axpwifiap.dtb > Warning (ranges_format): "ranges" property in /soc has invalid length (32 bytes) > (parent #address-cells == 2, child #address-cells == 2, #size-cells == 1) > > Could you please take a look and provide a separate patch to fix it up? > Sure. Let me take a look. -- Ezequiel Garc?a, Free Electrons Embedded Linux, Kernel and Android Engineering http://free-electrons.com