* [PATCH 0/2] Add support for a new Armada XP based board @ 2013-07-30 15:44 Thomas Petazzoni 2013-07-30 15:44 ` [PATCH 1/2] ARM: mvebu: add support for the AXP WiFi AP board Thomas Petazzoni 2013-07-30 15:44 ` [PATCH 2/2] ARM: mvebu: add gpio-keys and input event support in defconfig Thomas Petazzoni 0 siblings, 2 replies; 15+ messages in thread From: Thomas Petazzoni @ 2013-07-30 15:44 UTC (permalink / raw) To: linux-arm-kernel Hello, The following two patches add support for a new Armada-XP board. The first patch adds the DTS file, the second patch updates the mvebu_defconfig file with some more interesting options. Thanks, Thomas Thomas Petazzoni (2): ARM: mvebu: add support for the AXP WiFi AP board ARM: mvebu: add gpio-keys and input event support in defconfig arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/armada-xp-axpwifiap.dts | 164 ++++++++++++++++++++++++++++++ arch/arm/configs/mvebu_defconfig | 2 + 3 files changed, 167 insertions(+) create mode 100644 arch/arm/boot/dts/armada-xp-axpwifiap.dts -- 1.8.1.2 ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 1/2] ARM: mvebu: add support for the AXP WiFi AP board 2013-07-30 15:44 [PATCH 0/2] Add support for a new Armada XP based board Thomas Petazzoni @ 2013-07-30 15:44 ` Thomas Petazzoni 2013-08-03 18:11 ` Jason Cooper 2013-08-06 15:53 ` Jason Cooper 2013-07-30 15:44 ` [PATCH 2/2] ARM: mvebu: add gpio-keys and input event support in defconfig Thomas Petazzoni 1 sibling, 2 replies; 15+ messages in thread From: Thomas Petazzoni @ 2013-07-30 15:44 UTC (permalink / raw) To: linux-arm-kernel The AXP WiFi AP board is a Marvell platform based on the Armada XP MV78230 SoC. It has two mini-PCIe connectors, one USB 3.0 port powered by a USB 3.0 controller on PCIe, two Ethernet ports, 1 GB of RAM, 1 GB of NAND, 16 MB of SPI flash, one SATA port and one button, two UARTs Successfully tested: USB 3.0 port, the mini-PCIe connectors, SPI flash, Ethernet ports, SATA port, button, UART. Untested: NAND flash, due to lack of mainline support for the Armada 370/XP NAND controller for now. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/armada-xp-axpwifiap.dts | 164 ++++++++++++++++++++++++++++++ 2 files changed, 165 insertions(+) create mode 100644 arch/arm/boot/dts/armada-xp-axpwifiap.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 641b3c9..66bb64f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-370-mirabox.dtb \ armada-370-rd.dtb \ + armada-xp-axpwifiap.dtb \ armada-xp-db.dtb \ armada-xp-gp.dtb \ armada-xp-openblocks-ax3-4.dtb diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts new file mode 100644 index 0000000..2a542bd --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -0,0 +1,164 @@ +/* + * Device Tree file for Marvell RD-AXPWiFiAP. + * + * Note: this board is shipped with a new generation boot loader that + * remaps internal registers at 0xf1000000. Therefore, if earlyprintk + * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be + * used. + * + * Copyright (C) 2013 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +/include/ "armada-xp-mv78230.dtsi" + +/ { + model = "Marvell RD-AXPWiFiAP"; + compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */ + }; + + soc { + ranges = <0 0 0xf1000000 0x100000 /* Internal registers 1MiB */ + 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>; + + internal-regs { + pinctrl { + pinctrl-0 = <&pmx_phy_int>; + pinctrl-names = "default"; + + pmx_ge0: pmx-ge0 { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp6", "mpp7", + "mpp8", "mpp9", "mpp10", "mpp11"; + marvell,function = "ge0"; + }; + + pmx_ge1: pmx-ge1 { + marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", + "mpp16", "mpp17", "mpp18", "mpp19", + "mpp20", "mpp21", "mpp22", "mpp23"; + marvell,function = "ge1"; + }; + + pmx_keys: pmx-keys { + marvell,pins = "mpp33"; + marvell,function = "gpio"; + }; + + pmx_spi: pmx-spi { + marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39"; + marvell,function = "spi"; + }; + + pmx_phy_int: pmx-phy-int { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + }; + + serial at 12000 { + clock-frequency = <250000000>; + status = "okay"; + }; + + serial at 12100 { + clock-frequency = <250000000>; + status = "okay"; + }; + + sata at a0000 { + nr-ports = <1>; + status = "okay"; + }; + + mdio { + phy0: ethernet-phy at 0 { + reg = <0>; + }; + + phy1: ethernet-phy at 1 { + reg = <1>; + }; + }; + + ethernet at 70000 { + pinctrl-0 = <&pmx_ge0>; + pinctrl-names = "default"; + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + ethernet at 74000 { + pinctrl-0 = <&pmx_ge1>; + pinctrl-names = "default"; + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + spi0: spi at 10600 { + status = "okay"; + pinctrl-0 = <&pmx_spi>; + pinctrl-names = "default"; + + spi-flash at 0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a13"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; + }; + + pcie-controller { + status = "okay"; + + /* First mini-PCIe port */ + pcie at 1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Second mini-PCIe port */ + pcie at 2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + + /* Renesas uPD720202 USB 3.0 controller */ + pcie at 3,0 { + /* Port 0, Lane 3 */ + status = "okay"; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_keys>; + pinctrl-names = "default"; + + button at 1 { + label = "Factory Reset Button"; + linux,code = <141>; /* KEY_SETUP */ + gpios = <&gpio1 1 1>; + }; + }; +}; -- 1.8.1.2 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 1/2] ARM: mvebu: add support for the AXP WiFi AP board 2013-07-30 15:44 ` [PATCH 1/2] ARM: mvebu: add support for the AXP WiFi AP board Thomas Petazzoni @ 2013-08-03 18:11 ` Jason Cooper 2013-08-03 20:35 ` Seif Mazareeb 2013-08-06 15:53 ` Jason Cooper 1 sibling, 1 reply; 15+ messages in thread From: Jason Cooper @ 2013-08-03 18:11 UTC (permalink / raw) To: linux-arm-kernel On Tue, Jul 30, 2013 at 05:44:50PM +0200, Thomas Petazzoni wrote: > The AXP WiFi AP board is a Marvell platform based on the Armada XP > MV78230 SoC. It has two mini-PCIe connectors, one USB 3.0 port powered > by a USB 3.0 controller on PCIe, two Ethernet ports, 1 GB of RAM, 1 GB > of NAND, 16 MB of SPI flash, one SATA port and one button, two UARTs > > Successfully tested: USB 3.0 port, the mini-PCIe connectors, SPI > flash, Ethernet ports, SATA port, button, UART. > > Untested: NAND flash, due to lack of mainline support for the Armada > 370/XP NAND controller for now. > > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/armada-xp-axpwifiap.dts | 164 ++++++++++++++++++++++++++++++ > 2 files changed, 165 insertions(+) > create mode 100644 arch/arm/boot/dts/armada-xp-axpwifiap.dts Applied to mvebu/dt thx, Jason. ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 1/2] ARM: mvebu: add support for the AXP WiFi AP board 2013-08-03 18:11 ` Jason Cooper @ 2013-08-03 20:35 ` Seif Mazareeb 2013-08-03 20:43 ` Jason Cooper 2013-08-04 1:06 ` Jason Cooper 0 siblings, 2 replies; 15+ messages in thread From: Seif Mazareeb @ 2013-08-03 20:35 UTC (permalink / raw) To: linux-arm-kernel Post approval, but I've tested on my board too. UART, USB3.0, mini-PCIe, SPI, Sata, and Ethernet - looking good. Seif -----Original Message----- From: Jason Cooper [mailto:jason at lakedaemon.net] Sent: Saturday, August 03, 2013 11:12 AM To: Thomas Petazzoni Cc: Andrew Lunn; Gregory Clement; Lior Amsalem; Seif Mazareeb; linux-arm-kernel at lists.infradead.org; Ezequiel Garcia Subject: Re: [PATCH 1/2] ARM: mvebu: add support for the AXP WiFi AP board On Tue, Jul 30, 2013 at 05:44:50PM +0200, Thomas Petazzoni wrote: > The AXP WiFi AP board is a Marvell platform based on the Armada XP > MV78230 SoC. It has two mini-PCIe connectors, one USB 3.0 port powered > by a USB 3.0 controller on PCIe, two Ethernet ports, 1 GB of RAM, 1 GB > of NAND, 16 MB of SPI flash, one SATA port and one button, two UARTs > > Successfully tested: USB 3.0 port, the mini-PCIe connectors, SPI > flash, Ethernet ports, SATA port, button, UART. > > Untested: NAND flash, due to lack of mainline support for the Armada > 370/XP NAND controller for now. > > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/armada-xp-axpwifiap.dts | 164 > ++++++++++++++++++++++++++++++ > 2 files changed, 165 insertions(+) > create mode 100644 arch/arm/boot/dts/armada-xp-axpwifiap.dts Applied to mvebu/dt thx, Jason. ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 1/2] ARM: mvebu: add support for the AXP WiFi AP board 2013-08-03 20:35 ` Seif Mazareeb @ 2013-08-03 20:43 ` Jason Cooper 2013-08-04 1:06 ` Jason Cooper 1 sibling, 0 replies; 15+ messages in thread From: Jason Cooper @ 2013-08-03 20:43 UTC (permalink / raw) To: linux-arm-kernel Seif, For future reference, please don't toppost. On Sat, Aug 03, 2013 at 01:35:34PM -0700, Seif Mazareeb wrote: > Post approval, but I've tested on my board too. > UART, USB3.0, mini-PCIe, SPI, Sata, and Ethernet - looking good. Shall I consider this your Tested-by ? I can amend the commits up until I send the PR. thx, Jason. > -----Original Message----- > From: Jason Cooper [mailto:jason at lakedaemon.net] > Sent: Saturday, August 03, 2013 11:12 AM > To: Thomas Petazzoni > Cc: Andrew Lunn; Gregory Clement; Lior Amsalem; Seif Mazareeb; linux-arm-kernel at lists.infradead.org; Ezequiel Garcia > Subject: Re: [PATCH 1/2] ARM: mvebu: add support for the AXP WiFi AP board > > On Tue, Jul 30, 2013 at 05:44:50PM +0200, Thomas Petazzoni wrote: > > The AXP WiFi AP board is a Marvell platform based on the Armada XP > > MV78230 SoC. It has two mini-PCIe connectors, one USB 3.0 port powered > > by a USB 3.0 controller on PCIe, two Ethernet ports, 1 GB of RAM, 1 GB > > of NAND, 16 MB of SPI flash, one SATA port and one button, two UARTs > > > > Successfully tested: USB 3.0 port, the mini-PCIe connectors, SPI > > flash, Ethernet ports, SATA port, button, UART. > > > > Untested: NAND flash, due to lack of mainline support for the Armada > > 370/XP NAND controller for now. > > > > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > > --- > > arch/arm/boot/dts/Makefile | 1 + > > arch/arm/boot/dts/armada-xp-axpwifiap.dts | 164 > > ++++++++++++++++++++++++++++++ > > 2 files changed, 165 insertions(+) > > create mode 100644 arch/arm/boot/dts/armada-xp-axpwifiap.dts > > Applied to mvebu/dt > > thx, > > Jason. ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 1/2] ARM: mvebu: add support for the AXP WiFi AP board 2013-08-03 20:35 ` Seif Mazareeb 2013-08-03 20:43 ` Jason Cooper @ 2013-08-04 1:06 ` Jason Cooper 1 sibling, 0 replies; 15+ messages in thread From: Jason Cooper @ 2013-08-04 1:06 UTC (permalink / raw) To: linux-arm-kernel Seif, On Sat, Aug 03, 2013 at 01:35:34PM -0700, Seif Mazareeb wrote: > Post approval, but I've tested on my board too. > UART, USB3.0, mini-PCIe, SPI, Sata, and Ethernet - looking good. Added your Tested-by, thx, Jason. > -----Original Message----- > From: Jason Cooper [mailto:jason at lakedaemon.net] > Sent: Saturday, August 03, 2013 11:12 AM > To: Thomas Petazzoni > Cc: Andrew Lunn; Gregory Clement; Lior Amsalem; Seif Mazareeb; linux-arm-kernel at lists.infradead.org; Ezequiel Garcia > Subject: Re: [PATCH 1/2] ARM: mvebu: add support for the AXP WiFi AP board > > On Tue, Jul 30, 2013 at 05:44:50PM +0200, Thomas Petazzoni wrote: > > The AXP WiFi AP board is a Marvell platform based on the Armada XP > > MV78230 SoC. It has two mini-PCIe connectors, one USB 3.0 port powered > > by a USB 3.0 controller on PCIe, two Ethernet ports, 1 GB of RAM, 1 GB > > of NAND, 16 MB of SPI flash, one SATA port and one button, two UARTs > > > > Successfully tested: USB 3.0 port, the mini-PCIe connectors, SPI > > flash, Ethernet ports, SATA port, button, UART. > > > > Untested: NAND flash, due to lack of mainline support for the Armada > > 370/XP NAND controller for now. > > > > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > > --- > > arch/arm/boot/dts/Makefile | 1 + > > arch/arm/boot/dts/armada-xp-axpwifiap.dts | 164 > > ++++++++++++++++++++++++++++++ > > 2 files changed, 165 insertions(+) > > create mode 100644 arch/arm/boot/dts/armada-xp-axpwifiap.dts > > Applied to mvebu/dt > > thx, > > Jason. > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 1/2] ARM: mvebu: add support for the AXP WiFi AP board 2013-07-30 15:44 ` [PATCH 1/2] ARM: mvebu: add support for the AXP WiFi AP board Thomas Petazzoni 2013-08-03 18:11 ` Jason Cooper @ 2013-08-06 15:53 ` Jason Cooper 2013-08-06 16:32 ` Ezequiel Garcia 2013-08-06 17:09 ` Ezequiel Garcia 1 sibling, 2 replies; 15+ messages in thread From: Jason Cooper @ 2013-08-06 15:53 UTC (permalink / raw) To: linux-arm-kernel Ezequiel, On Tue, Jul 30, 2013 at 05:44:50PM +0200, Thomas Petazzoni wrote: > The AXP WiFi AP board is a Marvell platform based on the Armada XP > MV78230 SoC. It has two mini-PCIe connectors, one USB 3.0 port powered > by a USB 3.0 controller on PCIe, two Ethernet ports, 1 GB of RAM, 1 GB > of NAND, 16 MB of SPI flash, one SATA port and one button, two UARTs > > Successfully tested: USB 3.0 port, the mini-PCIe connectors, SPI > flash, Ethernet ports, SATA port, button, UART. > > Untested: NAND flash, due to lack of mainline support for the Armada > 370/XP NAND controller for now. > > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/armada-xp-axpwifiap.dts | 164 ++++++++++++++++++++++++++++++ > 2 files changed, 165 insertions(+) > create mode 100644 arch/arm/boot/dts/armada-xp-axpwifiap.dts When I merge this code with your MBus series I get the following warning: DTC arch/arm/boot/dts/armada-xp-axpwifiap.dtb Warning (ranges_format): "ranges" property in /soc has invalid length (32 bytes) (parent #address-cells == 2, child #address-cells == 2, #size-cells == 1) Could you please take a look and provide a separate patch to fix it up? thx, Jason. > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 641b3c9..66bb64f 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ > dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ > armada-370-mirabox.dtb \ > armada-370-rd.dtb \ > + armada-xp-axpwifiap.dtb \ > armada-xp-db.dtb \ > armada-xp-gp.dtb \ > armada-xp-openblocks-ax3-4.dtb > diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts > new file mode 100644 > index 0000000..2a542bd > --- /dev/null > +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts > @@ -0,0 +1,164 @@ > +/* > + * Device Tree file for Marvell RD-AXPWiFiAP. > + * > + * Note: this board is shipped with a new generation boot loader that > + * remaps internal registers at 0xf1000000. Therefore, if earlyprintk > + * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be > + * used. > + * > + * Copyright (C) 2013 Marvell > + * > + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > + * > + * This file is licensed under the terms of the GNU General Public > + * License version 2. This program is licensed "as is" without any > + * warranty of any kind, whether express or implied. > + */ > + > +/dts-v1/; > +/include/ "armada-xp-mv78230.dtsi" > + > +/ { > + model = "Marvell RD-AXPWiFiAP"; > + compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp"; > + > + chosen { > + bootargs = "console=ttyS0,115200 earlyprintk"; > + }; > + > + memory { > + device_type = "memory"; > + reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */ > + }; > + > + soc { > + ranges = <0 0 0xf1000000 0x100000 /* Internal registers 1MiB */ > + 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>; > + > + internal-regs { > + pinctrl { > + pinctrl-0 = <&pmx_phy_int>; > + pinctrl-names = "default"; > + > + pmx_ge0: pmx-ge0 { > + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", > + "mpp4", "mpp5", "mpp6", "mpp7", > + "mpp8", "mpp9", "mpp10", "mpp11"; > + marvell,function = "ge0"; > + }; > + > + pmx_ge1: pmx-ge1 { > + marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", > + "mpp16", "mpp17", "mpp18", "mpp19", > + "mpp20", "mpp21", "mpp22", "mpp23"; > + marvell,function = "ge1"; > + }; > + > + pmx_keys: pmx-keys { > + marvell,pins = "mpp33"; > + marvell,function = "gpio"; > + }; > + > + pmx_spi: pmx-spi { > + marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39"; > + marvell,function = "spi"; > + }; > + > + pmx_phy_int: pmx-phy-int { > + marvell,pins = "mpp32"; > + marvell,function = "gpio"; > + }; > + }; > + > + serial at 12000 { > + clock-frequency = <250000000>; > + status = "okay"; > + }; > + > + serial at 12100 { > + clock-frequency = <250000000>; > + status = "okay"; > + }; > + > + sata at a0000 { > + nr-ports = <1>; > + status = "okay"; > + }; > + > + mdio { > + phy0: ethernet-phy at 0 { > + reg = <0>; > + }; > + > + phy1: ethernet-phy at 1 { > + reg = <1>; > + }; > + }; > + > + ethernet at 70000 { > + pinctrl-0 = <&pmx_ge0>; > + pinctrl-names = "default"; > + status = "okay"; > + phy = <&phy0>; > + phy-mode = "rgmii-id"; > + }; > + ethernet at 74000 { > + pinctrl-0 = <&pmx_ge1>; > + pinctrl-names = "default"; > + status = "okay"; > + phy = <&phy1>; > + phy-mode = "rgmii-id"; > + }; > + > + spi0: spi at 10600 { > + status = "okay"; > + pinctrl-0 = <&pmx_spi>; > + pinctrl-names = "default"; > + > + spi-flash at 0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "n25q128a13"; > + reg = <0>; /* Chip select 0 */ > + spi-max-frequency = <108000000>; > + }; > + }; > + > + pcie-controller { > + status = "okay"; > + > + /* First mini-PCIe port */ > + pcie at 1,0 { > + /* Port 0, Lane 0 */ > + status = "okay"; > + }; > + > + /* Second mini-PCIe port */ > + pcie at 2,0 { > + /* Port 0, Lane 1 */ > + status = "okay"; > + }; > + > + /* Renesas uPD720202 USB 3.0 controller */ > + pcie at 3,0 { > + /* Port 0, Lane 3 */ > + status = "okay"; > + }; > + }; > + }; > + }; > + > + gpio_keys { > + compatible = "gpio-keys"; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-0 = <&pmx_keys>; > + pinctrl-names = "default"; > + > + button at 1 { > + label = "Factory Reset Button"; > + linux,code = <141>; /* KEY_SETUP */ > + gpios = <&gpio1 1 1>; > + }; > + }; > +}; > -- > 1.8.1.2 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 1/2] ARM: mvebu: add support for the AXP WiFi AP board 2013-08-06 15:53 ` Jason Cooper @ 2013-08-06 16:32 ` Ezequiel Garcia 2013-08-06 17:09 ` Ezequiel Garcia 1 sibling, 0 replies; 15+ messages in thread From: Ezequiel Garcia @ 2013-08-06 16:32 UTC (permalink / raw) To: linux-arm-kernel On Tue, Aug 06, 2013 at 11:53:43AM -0400, Jason Cooper wrote: > Ezequiel, > > On Tue, Jul 30, 2013 at 05:44:50PM +0200, Thomas Petazzoni wrote: > > The AXP WiFi AP board is a Marvell platform based on the Armada XP > > MV78230 SoC. It has two mini-PCIe connectors, one USB 3.0 port powered > > by a USB 3.0 controller on PCIe, two Ethernet ports, 1 GB of RAM, 1 GB > > of NAND, 16 MB of SPI flash, one SATA port and one button, two UARTs > > > > Successfully tested: USB 3.0 port, the mini-PCIe connectors, SPI > > flash, Ethernet ports, SATA port, button, UART. > > > > Untested: NAND flash, due to lack of mainline support for the Armada > > 370/XP NAND controller for now. > > > > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > > --- > > arch/arm/boot/dts/Makefile | 1 + > > arch/arm/boot/dts/armada-xp-axpwifiap.dts | 164 ++++++++++++++++++++++++++++++ > > 2 files changed, 165 insertions(+) > > create mode 100644 arch/arm/boot/dts/armada-xp-axpwifiap.dts > > When I merge this code with your MBus series I get the following > warning: > > DTC arch/arm/boot/dts/armada-xp-axpwifiap.dtb > Warning (ranges_format): "ranges" property in /soc has invalid length (32 bytes) > (parent #address-cells == 2, child #address-cells == 2, #size-cells == 1) > > Could you please take a look and provide a separate patch to fix it up? > Sure. Let me take a look. -- Ezequiel Garc?a, Free Electrons Embedded Linux, Kernel and Android Engineering http://free-electrons.com ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 1/2] ARM: mvebu: add support for the AXP WiFi AP board 2013-08-06 15:53 ` Jason Cooper 2013-08-06 16:32 ` Ezequiel Garcia @ 2013-08-06 17:09 ` Ezequiel Garcia 2013-08-06 17:36 ` Jason Cooper ` (2 more replies) 1 sibling, 3 replies; 15+ messages in thread From: Ezequiel Garcia @ 2013-08-06 17:09 UTC (permalink / raw) To: linux-arm-kernel On Tue, Aug 06, 2013 at 11:53:43AM -0400, Jason Cooper wrote: > Ezequiel, > > On Tue, Jul 30, 2013 at 05:44:50PM +0200, Thomas Petazzoni wrote: > > The AXP WiFi AP board is a Marvell platform based on the Armada XP > > MV78230 SoC. It has two mini-PCIe connectors, one USB 3.0 port powered > > by a USB 3.0 controller on PCIe, two Ethernet ports, 1 GB of RAM, 1 GB > > of NAND, 16 MB of SPI flash, one SATA port and one button, two UARTs > > > > Successfully tested: USB 3.0 port, the mini-PCIe connectors, SPI > > flash, Ethernet ports, SATA port, button, UART. > > > > Untested: NAND flash, due to lack of mainline support for the Armada > > 370/XP NAND controller for now. > > > > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > > --- > > arch/arm/boot/dts/Makefile | 1 + > > arch/arm/boot/dts/armada-xp-axpwifiap.dts | 164 ++++++++++++++++++++++++++++++ > > 2 files changed, 165 insertions(+) > > create mode 100644 arch/arm/boot/dts/armada-xp-axpwifiap.dts > > When I merge this code with your MBus series I get the following > warning: > > DTC arch/arm/boot/dts/armada-xp-axpwifiap.dtb > Warning (ranges_format): "ranges" property in /soc has invalid length (32 bytes) > (parent #address-cells == 2, child #address-cells == 2, #size-cells == 1) > > Could you please take a look and provide a separate patch to fix it up? > Jason, When I cherry-pick commit 704cc70179481c814d581597a7d2cdbbeb152bee (ARM: mvebu: add support for the AXP WiFi AP board) from mvebu/dt into mvebu/mbus_dt, I found it's needed to apply the changes below. If they look fine feel free to pick them, or request any other base for them. I don't have the board to test this, so maybe Seif can help testing them? Thanks! commit ad1821bf7fa0790f2d513f5551abcd13cf297303 Author: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Date: Tue Aug 6 14:02:45 2013 -0300 ARM: mvebu: Fix AXP-WiFi-AP DT for MBUS DT binding The ranges property needs to be changed to use the new MBus DT binding. Also, the pcie-controller node needs to be relocated as according the MBus DT binding, it's now a child of the mbus-compatible node. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index 2a542bd..c5fe572 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -16,7 +16,7 @@ */ /dts-v1/; -/include/ "armada-xp-mv78230.dtsi" +#include "armada-xp-mv78230.dtsi" / { model = "Marvell RD-AXPWiFiAP"; @@ -32,8 +32,30 @@ }; soc { - ranges = <0 0 0xf1000000 0x100000 /* Internal registers 1MiB */ - 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>; + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; + + pcie-controller { + status = "okay"; + + /* First mini-PCIe port */ + pcie at 1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Second mini-PCIe port */ + pcie at 2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + + /* Renesas uPD720202 USB 3.0 controller */ + pcie at 3,0 { + /* Port 0, Lane 3 */ + status = "okay"; + }; + }; internal-regs { pinctrl { @@ -123,28 +145,6 @@ spi-max-frequency = <108000000>; }; }; - - pcie-controller { - status = "okay"; - - /* First mini-PCIe port */ - pcie at 1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Second mini-PCIe port */ - pcie at 2,0 { - /* Port 0, Lane 1 */ - status = "okay"; - }; - - /* Renesas uPD720202 USB 3.0 controller */ - pcie at 3,0 { - /* Port 0, Lane 3 */ - status = "okay"; - }; - }; }; }; commit ae6c4bd3c2d337797ed1b8949b693d33c36ecbac Author: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Date: Tue Aug 6 14:02:11 2013 -0300 ARM: mvebu: Fix missing DT preprocessor include Fix the armada-xp-mv78230.dtsi file which lacked a proper #include to use the DT preprocessor. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index f093e39..e45e363 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -13,7 +13,7 @@ * common to all Armada XP SoCs. */ -/include/ "armada-xp.dtsi" +#include "armada-xp.dtsi" / { model = "Marvell Armada XP MV78230 SoC"; -- Ezequiel Garc?a, Free Electrons Embedded Linux, Kernel and Android Engineering http://free-electrons.com ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 1/2] ARM: mvebu: add support for the AXP WiFi AP board 2013-08-06 17:09 ` Ezequiel Garcia @ 2013-08-06 17:36 ` Jason Cooper 2013-08-06 18:00 ` Thomas Petazzoni 2013-08-07 20:11 ` Jason Cooper 2 siblings, 0 replies; 15+ messages in thread From: Jason Cooper @ 2013-08-06 17:36 UTC (permalink / raw) To: linux-arm-kernel On Tue, Aug 06, 2013 at 02:09:42PM -0300, Ezequiel Garcia wrote: > On Tue, Aug 06, 2013 at 11:53:43AM -0400, Jason Cooper wrote: > > Ezequiel, > > > > On Tue, Jul 30, 2013 at 05:44:50PM +0200, Thomas Petazzoni wrote: > > > The AXP WiFi AP board is a Marvell platform based on the Armada XP > > > MV78230 SoC. It has two mini-PCIe connectors, one USB 3.0 port powered > > > by a USB 3.0 controller on PCIe, two Ethernet ports, 1 GB of RAM, 1 GB > > > of NAND, 16 MB of SPI flash, one SATA port and one button, two UARTs > > > > > > Successfully tested: USB 3.0 port, the mini-PCIe connectors, SPI > > > flash, Ethernet ports, SATA port, button, UART. > > > > > > Untested: NAND flash, due to lack of mainline support for the Armada > > > 370/XP NAND controller for now. > > > > > > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > > > --- > > > arch/arm/boot/dts/Makefile | 1 + > > > arch/arm/boot/dts/armada-xp-axpwifiap.dts | 164 ++++++++++++++++++++++++++++++ > > > 2 files changed, 165 insertions(+) > > > create mode 100644 arch/arm/boot/dts/armada-xp-axpwifiap.dts > > > > When I merge this code with your MBus series I get the following > > warning: > > > > DTC arch/arm/boot/dts/armada-xp-axpwifiap.dtb > > Warning (ranges_format): "ranges" property in /soc has invalid length (32 bytes) > > (parent #address-cells == 2, child #address-cells == 2, #size-cells == 1) > > > > Could you please take a look and provide a separate patch to fix it up? > > > > Jason, > > When I cherry-pick commit 704cc70179481c814d581597a7d2cdbbeb152bee > (ARM: mvebu: add support for the AXP WiFi AP board) from mvebu/dt > into mvebu/mbus_dt, I found it's needed to apply the changes below. > > If they look fine feel free to pick them, or request any other > base for them. > > I don't have the board to test this, so maybe Seif can help > testing them? Thanks Ezequiel! Seif, would you mind giving this a spin and let me know if it's ok? thx, Jason. > commit ad1821bf7fa0790f2d513f5551abcd13cf297303 > Author: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> > Date: Tue Aug 6 14:02:45 2013 -0300 > > ARM: mvebu: Fix AXP-WiFi-AP DT for MBUS DT binding > > The ranges property needs to be changed to use the new MBus DT binding. > Also, the pcie-controller node needs to be relocated as according the MBus > DT binding, it's now a child of the mbus-compatible node. > > Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> > > diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts > index 2a542bd..c5fe572 100644 > --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts > +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts > @@ -16,7 +16,7 @@ > */ > > /dts-v1/; > -/include/ "armada-xp-mv78230.dtsi" > +#include "armada-xp-mv78230.dtsi" > > / { > model = "Marvell RD-AXPWiFiAP"; > @@ -32,8 +32,30 @@ > }; > > soc { > - ranges = <0 0 0xf1000000 0x100000 /* Internal registers 1MiB */ > - 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>; > + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 > + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; > + > + pcie-controller { > + status = "okay"; > + > + /* First mini-PCIe port */ > + pcie at 1,0 { > + /* Port 0, Lane 0 */ > + status = "okay"; > + }; > + > + /* Second mini-PCIe port */ > + pcie at 2,0 { > + /* Port 0, Lane 1 */ > + status = "okay"; > + }; > + > + /* Renesas uPD720202 USB 3.0 controller */ > + pcie at 3,0 { > + /* Port 0, Lane 3 */ > + status = "okay"; > + }; > + }; > > internal-regs { > pinctrl { > @@ -123,28 +145,6 @@ > spi-max-frequency = <108000000>; > }; > }; > - > - pcie-controller { > - status = "okay"; > - > - /* First mini-PCIe port */ > - pcie at 1,0 { > - /* Port 0, Lane 0 */ > - status = "okay"; > - }; > - > - /* Second mini-PCIe port */ > - pcie at 2,0 { > - /* Port 0, Lane 1 */ > - status = "okay"; > - }; > - > - /* Renesas uPD720202 USB 3.0 controller */ > - pcie at 3,0 { > - /* Port 0, Lane 3 */ > - status = "okay"; > - }; > - }; > }; > }; > > > commit ae6c4bd3c2d337797ed1b8949b693d33c36ecbac > Author: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> > Date: Tue Aug 6 14:02:11 2013 -0300 > > ARM: mvebu: Fix missing DT preprocessor include > > Fix the armada-xp-mv78230.dtsi file which lacked a proper #include > to use the DT preprocessor. > > Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> > > diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi > index f093e39..e45e363 100644 > --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi > +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi > @@ -13,7 +13,7 @@ > * common to all Armada XP SoCs. > */ > > -/include/ "armada-xp.dtsi" > +#include "armada-xp.dtsi" > > / { > model = "Marvell Armada XP MV78230 SoC"; > > -- > Ezequiel Garc?a, Free Electrons > Embedded Linux, Kernel and Android Engineering > http://free-electrons.com > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 1/2] ARM: mvebu: add support for the AXP WiFi AP board 2013-08-06 17:09 ` Ezequiel Garcia 2013-08-06 17:36 ` Jason Cooper @ 2013-08-06 18:00 ` Thomas Petazzoni 2013-08-06 18:04 ` Jason Cooper 2013-08-07 20:11 ` Jason Cooper 2 siblings, 1 reply; 15+ messages in thread From: Thomas Petazzoni @ 2013-08-06 18:00 UTC (permalink / raw) To: linux-arm-kernel Dear Ezequiel Garcia, On Tue, 6 Aug 2013 14:09:42 -0300, Ezequiel Garcia wrote: > When I cherry-pick commit 704cc70179481c814d581597a7d2cdbbeb152bee > (ARM: mvebu: add support for the AXP WiFi AP board) from mvebu/dt > into mvebu/mbus_dt, I found it's needed to apply the changes below. > > If they look fine feel free to pick them, or request any other > base for them. > > I don't have the board to test this, so maybe Seif can help > testing them? Your two patches look good to me. Jason, if you merge them somewhere, it will make it easier for me to test them. I have the AXP WiFi AP board here to do the validation. Thanks, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 1/2] ARM: mvebu: add support for the AXP WiFi AP board 2013-08-06 18:00 ` Thomas Petazzoni @ 2013-08-06 18:04 ` Jason Cooper 0 siblings, 0 replies; 15+ messages in thread From: Jason Cooper @ 2013-08-06 18:04 UTC (permalink / raw) To: linux-arm-kernel On Tue, Aug 06, 2013 at 08:00:03PM +0200, Thomas Petazzoni wrote: > Dear Ezequiel Garcia, > > On Tue, 6 Aug 2013 14:09:42 -0300, Ezequiel Garcia wrote: > > > When I cherry-pick commit 704cc70179481c814d581597a7d2cdbbeb152bee > > (ARM: mvebu: add support for the AXP WiFi AP board) from mvebu/dt > > into mvebu/mbus_dt, I found it's needed to apply the changes below. > > > > If they look fine feel free to pick them, or request any other > > base for them. > > > > I don't have the board to test this, so maybe Seif can help > > testing them? > > Your two patches look good to me. Jason, if you merge them somewhere, > it will make it easier for me to test them. I have the AXP WiFi AP > board here to do the validation. Ok, I'm probably going to move the original patch over to mvebu/mbus_dt, then add Ezequiel's patch. That should prevent any unnecessary dependencies. If I don't get to it tonight, it'll probably be sometime tomorrow (that and MSI). thx, Jason. ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 1/2] ARM: mvebu: add support for the AXP WiFi AP board 2013-08-06 17:09 ` Ezequiel Garcia 2013-08-06 17:36 ` Jason Cooper 2013-08-06 18:00 ` Thomas Petazzoni @ 2013-08-07 20:11 ` Jason Cooper 2 siblings, 0 replies; 15+ messages in thread From: Jason Cooper @ 2013-08-07 20:11 UTC (permalink / raw) To: linux-arm-kernel On Tue, Aug 06, 2013 at 02:09:42PM -0300, Ezequiel Garcia wrote: > On Tue, Aug 06, 2013 at 11:53:43AM -0400, Jason Cooper wrote: > > Ezequiel, > > > > On Tue, Jul 30, 2013 at 05:44:50PM +0200, Thomas Petazzoni wrote: > > > The AXP WiFi AP board is a Marvell platform based on the Armada XP > > > MV78230 SoC. It has two mini-PCIe connectors, one USB 3.0 port powered > > > by a USB 3.0 controller on PCIe, two Ethernet ports, 1 GB of RAM, 1 GB > > > of NAND, 16 MB of SPI flash, one SATA port and one button, two UARTs > > > > > > Successfully tested: USB 3.0 port, the mini-PCIe connectors, SPI > > > flash, Ethernet ports, SATA port, button, UART. > > > > > > Untested: NAND flash, due to lack of mainline support for the Armada > > > 370/XP NAND controller for now. > > > > > > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > > > --- > > > arch/arm/boot/dts/Makefile | 1 + > > > arch/arm/boot/dts/armada-xp-axpwifiap.dts | 164 ++++++++++++++++++++++++++++++ > > > 2 files changed, 165 insertions(+) > > > create mode 100644 arch/arm/boot/dts/armada-xp-axpwifiap.dts > > > > When I merge this code with your MBus series I get the following > > warning: > > > > DTC arch/arm/boot/dts/armada-xp-axpwifiap.dtb > > Warning (ranges_format): "ranges" property in /soc has invalid length (32 bytes) > > (parent #address-cells == 2, child #address-cells == 2, #size-cells == 1) > > > > Could you please take a look and provide a separate patch to fix it up? > > > > Jason, > > When I cherry-pick commit 704cc70179481c814d581597a7d2cdbbeb152bee > (ARM: mvebu: add support for the AXP WiFi AP board) from mvebu/dt > into mvebu/mbus_dt, I found it's needed to apply the changes below. > > If they look fine feel free to pick them, or request any other > base for them. > > I don't have the board to test this, so maybe Seif can help > testing them? > > Thanks! > > commit ad1821bf7fa0790f2d513f5551abcd13cf297303 > Author: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> > Date: Tue Aug 6 14:02:45 2013 -0300 > > ARM: mvebu: Fix AXP-WiFi-AP DT for MBUS DT binding > > The ranges property needs to be changed to use the new MBus DT binding. > Also, the pcie-controller node needs to be relocated as according the MBus > DT binding, it's now a child of the mbus-compatible node. > > Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Applied to mvebu/mbus_dt along with the original patch introducing the board. Also added a patch to use the dts pre-processor for mv78230. thx, Jason. > > diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts > index 2a542bd..c5fe572 100644 > --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts > +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts > @@ -16,7 +16,7 @@ > */ > > /dts-v1/; > -/include/ "armada-xp-mv78230.dtsi" > +#include "armada-xp-mv78230.dtsi" > > / { > model = "Marvell RD-AXPWiFiAP"; > @@ -32,8 +32,30 @@ > }; > > soc { > - ranges = <0 0 0xf1000000 0x100000 /* Internal registers 1MiB */ > - 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>; > + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 > + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; > + > + pcie-controller { > + status = "okay"; > + > + /* First mini-PCIe port */ > + pcie at 1,0 { > + /* Port 0, Lane 0 */ > + status = "okay"; > + }; > + > + /* Second mini-PCIe port */ > + pcie at 2,0 { > + /* Port 0, Lane 1 */ > + status = "okay"; > + }; > + > + /* Renesas uPD720202 USB 3.0 controller */ > + pcie at 3,0 { > + /* Port 0, Lane 3 */ > + status = "okay"; > + }; > + }; > > internal-regs { > pinctrl { > @@ -123,28 +145,6 @@ > spi-max-frequency = <108000000>; > }; > }; > - > - pcie-controller { > - status = "okay"; > - > - /* First mini-PCIe port */ > - pcie at 1,0 { > - /* Port 0, Lane 0 */ > - status = "okay"; > - }; > - > - /* Second mini-PCIe port */ > - pcie at 2,0 { > - /* Port 0, Lane 1 */ > - status = "okay"; > - }; > - > - /* Renesas uPD720202 USB 3.0 controller */ > - pcie at 3,0 { > - /* Port 0, Lane 3 */ > - status = "okay"; > - }; > - }; > }; > }; > > > commit ae6c4bd3c2d337797ed1b8949b693d33c36ecbac > Author: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> > Date: Tue Aug 6 14:02:11 2013 -0300 > > ARM: mvebu: Fix missing DT preprocessor include > > Fix the armada-xp-mv78230.dtsi file which lacked a proper #include > to use the DT preprocessor. > > Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> > > diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi > index f093e39..e45e363 100644 > --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi > +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi > @@ -13,7 +13,7 @@ > * common to all Armada XP SoCs. > */ > > -/include/ "armada-xp.dtsi" > +#include "armada-xp.dtsi" > > / { > model = "Marvell Armada XP MV78230 SoC"; > > -- > Ezequiel Garc?a, Free Electrons > Embedded Linux, Kernel and Android Engineering > http://free-electrons.com > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 2/2] ARM: mvebu: add gpio-keys and input event support in defconfig 2013-07-30 15:44 [PATCH 0/2] Add support for a new Armada XP based board Thomas Petazzoni 2013-07-30 15:44 ` [PATCH 1/2] ARM: mvebu: add support for the AXP WiFi AP board Thomas Petazzoni @ 2013-07-30 15:44 ` Thomas Petazzoni 2013-08-03 18:14 ` Jason Cooper 1 sibling, 1 reply; 15+ messages in thread From: Thomas Petazzoni @ 2013-07-30 15:44 UTC (permalink / raw) To: linux-arm-kernel Some Armada 370/XP boards have GPIO buttons, so it makes sense to enable gpio-keys and the input event interface in mvebu_defconfig. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> --- arch/arm/configs/mvebu_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index 731814e..594d706 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -39,6 +39,8 @@ CONFIG_MVNETA=y CONFIG_MARVELL_PHY=y CONFIG_MWIFIEX=y CONFIG_MWIFIEX_SDIO=y +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_I2C=y -- 1.8.1.2 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 2/2] ARM: mvebu: add gpio-keys and input event support in defconfig 2013-07-30 15:44 ` [PATCH 2/2] ARM: mvebu: add gpio-keys and input event support in defconfig Thomas Petazzoni @ 2013-08-03 18:14 ` Jason Cooper 0 siblings, 0 replies; 15+ messages in thread From: Jason Cooper @ 2013-08-03 18:14 UTC (permalink / raw) To: linux-arm-kernel On Tue, Jul 30, 2013 at 05:44:51PM +0200, Thomas Petazzoni wrote: > Some Armada 370/XP boards have GPIO buttons, so it makes sense to > enable gpio-keys and the input event interface in mvebu_defconfig. > > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > --- > arch/arm/configs/mvebu_defconfig | 2 ++ > 1 file changed, 2 insertions(+) Applied to mvebu/defconfig thx, Jason. ^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2013-08-07 20:11 UTC | newest] Thread overview: 15+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-07-30 15:44 [PATCH 0/2] Add support for a new Armada XP based board Thomas Petazzoni 2013-07-30 15:44 ` [PATCH 1/2] ARM: mvebu: add support for the AXP WiFi AP board Thomas Petazzoni 2013-08-03 18:11 ` Jason Cooper 2013-08-03 20:35 ` Seif Mazareeb 2013-08-03 20:43 ` Jason Cooper 2013-08-04 1:06 ` Jason Cooper 2013-08-06 15:53 ` Jason Cooper 2013-08-06 16:32 ` Ezequiel Garcia 2013-08-06 17:09 ` Ezequiel Garcia 2013-08-06 17:36 ` Jason Cooper 2013-08-06 18:00 ` Thomas Petazzoni 2013-08-06 18:04 ` Jason Cooper 2013-08-07 20:11 ` Jason Cooper 2013-07-30 15:44 ` [PATCH 2/2] ARM: mvebu: add gpio-keys and input event support in defconfig Thomas Petazzoni 2013-08-03 18:14 ` Jason Cooper
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).