From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Wed, 7 Aug 2013 09:00:30 +0100 Subject: [PATCH 1/3] clk: s2mps11: Add support for s2mps11 In-Reply-To: <20130806195235.5348.32684@quantum> References: <1373197462-4033-1-git-send-email-yadi.brar@samsung.com> <1373197462-4033-2-git-send-email-yadi.brar@samsung.com> <20130805232337.5348.79716@quantum> <20130806195235.5348.32684@quantum> Message-ID: <20130807080030.GI5100@lee--X1> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, 06 Aug 2013, Mike Turquette wrote: > Quoting Yadwinder Singh Brar (2013-08-05 21:25:44) > > Hi Mike, > > > > On Tue, Aug 6, 2013 at 4:53 AM, Mike Turquette wrote: > > > Quoting Yadwinder Singh Brar (2013-07-07 04:44:20) > > >> This patch adds support to register three(AP/CP/BT) buffered 32.768 KHz > > >> outputs of mfd-s2mps11 with common clock framework. > > >> > > >> Signed-off-by: Yadwinder Singh Brar > > > > > > Yadwinder, > > > > > > Looks good to me with the exception of a binding description document. > > > Can you provide one and squash it into this commit? > > > > > > > Binding description is provided in next patch : > > [PATCH 2/3] mfd: sec: Add clock cell for s2mps11 : > > https://lkml.org/lkml/2013/7/16/228 > > > > Since its a MFD, so i preferred to add documentation in same file > > under mfd, same was done for regulators also. > > If its fine with you then, I think that patch can go through MFD tree > > as same file is touched in for-next of MFD tree. > > I see. Ok I've taken patch #1 into clk-next. Can you review the bindings in: mfd: sec: Add clock cell for s2mps11 ... please Mike? -- Lee Jones Linaro ST-Ericsson Landing Team Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog