From mboxrd@z Thu Jan 1 00:00:00 1970 From: thomas.petazzoni@free-electrons.com (Thomas Petazzoni) Date: Wed, 7 Aug 2013 18:08:54 +0200 Subject: [PATCH] ARM: at91/dt: split sam9x5 peripheral definitions In-Reply-To: <1375870466-1093-1-git-send-email-b.brezillon@overkiz.com> References: <1375870466-1093-1-git-send-email-b.brezillon@overkiz.com> Message-ID: <20130807180854.41b4bedb@skate> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Dear Boris BREZILLON, On Wed, 7 Aug 2013 12:14:26 +0200, Boris BREZILLON wrote: > This patch splits the sam9x5 peripheral definitions into: > - a common base for all sam9x5 SoCs (at91sam9x5.dtsi) > - several optional peripheral definitions which will be included by specific > sam9x5 SoCs (at91sam9x5_'periph name'.dtsi) > > This provides a better representation of the real hardware (drop unneeded > dt nodes) and avoids future peripheral id conflict (lcdc and isi both use > peripheral id 25). > > Signed-off-by: Boris BREZILLON > --- > arch/arm/boot/dts/at91sam9g25.dtsi | 2 + > arch/arm/boot/dts/at91sam9g35.dtsi | 1 + > arch/arm/boot/dts/at91sam9x25.dtsi | 24 ++--------- > arch/arm/boot/dts/at91sam9x35.dtsi | 1 + > arch/arm/boot/dts/at91sam9x5.dtsi | 67 ------------------------------ > arch/arm/boot/dts/at91sam9x5_macb0.dtsi | 56 +++++++++++++++++++++++++ > arch/arm/boot/dts/at91sam9x5_macb1.dtsi | 44 ++++++++++++++++++++ > arch/arm/boot/dts/at91sam9x5_usart3.dtsi | 51 +++++++++++++++++++++++ > 8 files changed, 158 insertions(+), 88 deletions(-) > create mode 100644 arch/arm/boot/dts/at91sam9x5_macb0.dtsi > create mode 100644 arch/arm/boot/dts/at91sam9x5_macb1.dtsi > create mode 100644 arch/arm/boot/dts/at91sam9x5_usart3.dtsi Hum, do we really want to have .dtsi files per peripheral? I might have overlooked this, but I think it's the first time we would have this in arch/arm/boot/dts. Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com