From: mturquette@linaro.org (Mike Turquette)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 8/9] clk: sunxi: Fix incorrect placement of __initconst
Date: Tue, 27 Aug 2013 18:44:12 -0700 [thread overview]
Message-ID: <20130828014412.8231.96003@quantum> (raw)
In-Reply-To: <1376298847-21828-8-git-send-email-sachin.kamat@linaro.org>
Quoting Sachin Kamat (2013-08-12 02:14:06)
> __initconst should be placed between the variable name and equal
> sign for the variable to be placed in the intended section.
>
> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
> Cc: Emilio L?pez <emilio@elopez.com.ar>
Thanks much for this cleanup! I've applied all of the patches in this
series. This patch required reflow due to recent changes to the sunxi
clock driver. Below is what I merged. Let me know if there are any
issues.
Regards,
Mike
>From 52be7cc862942ea0a53031b3b1ca84dc95422b5b Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Mon, 12 Aug 2013 14:44:06 +0530
Subject: [PATCH] clk: sunxi: Fix incorrect placement of __initconst
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
__initconst should be placed between the variable name and equal
sign for the variable to be placed in the intended section.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Emilio L?pez <emilio@elopez.com.ar>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette at linaro.org: refreshed patch based on sunxi changes]
---
drivers/clk/sunxi/clk-sunxi.c | 60 +++++++++++++++++++++----------------------
1 file changed, 30 insertions(+), 30 deletions(-)
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index d39f213..34ee69f 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -288,17 +288,17 @@ static struct clk_factors_config sun4i_apb1_config = {
.pwidth = 2,
};
-static const __initconst struct factors_data sun4i_pll1_data = {
+static const struct factors_data sun4i_pll1_data __initconst = {
.table = &sun4i_pll1_config,
.getter = sun4i_get_pll1_factors,
};
-static const __initconst struct factors_data sun6i_a31_pll1_data = {
+static const struct factors_data sun6i_a31_pll1_data __initconst = {
.table = &sun6i_a31_pll1_config,
.getter = sun6i_a31_get_pll1_factors,
};
-static const __initconst struct factors_data sun4i_apb1_data = {
+static const struct factors_data sun4i_apb1_data __initconst = {
.table = &sun4i_apb1_config,
.getter = sun4i_get_apb1_factors,
};
@@ -336,15 +336,15 @@ struct mux_data {
u8 shift;
};
-static const __initconst struct mux_data sun4i_cpu_mux_data = {
+static const struct mux_data sun4i_cpu_mux_data __initconst = {
.shift = 16,
};
-static const __initconst struct mux_data sun6i_a31_ahb1_mux_data = {
+static const struct mux_data sun6i_a31_ahb1_mux_data __initconst = {
.shift = 12,
};
-static const __initconst struct mux_data sun4i_apb1_mux_data = {
+static const struct mux_data sun4i_apb1_mux_data __initconst = {
.shift = 24,
};
@@ -385,25 +385,25 @@ struct div_data {
u8 width;
};
-static const __initconst struct div_data sun4i_axi_data = {
+static const struct div_data sun4i_axi_data __initconst = {
.shift = 0,
.pow = 0,
.width = 2,
};
-static const __initconst struct div_data sun4i_ahb_data = {
+static const struct div_data sun4i_ahb_data __initconst = {
.shift = 4,
.pow = 1,
.width = 2,
};
-static const __initconst struct div_data sun4i_apb0_data = {
+static const struct div_data sun4i_apb0_data __initconst = {
.shift = 8,
.pow = 1,
.width = 2,
};
-static const __initconst struct div_data sun6i_a31_apb2_div_data = {
+static const struct div_data sun6i_a31_apb2_div_data __initconst = {
.shift = 0,
.pow = 0,
.width = 4,
@@ -443,67 +443,67 @@ struct gates_data {
DECLARE_BITMAP(mask, SUNXI_GATES_MAX_SIZE);
};
-static const __initconst struct gates_data sun4i_axi_gates_data = {
+static const struct gates_data sun4i_axi_gates_data __initconst = {
.mask = {1},
};
-static const __initconst struct gates_data sun4i_ahb_gates_data = {
+static const struct gates_data sun4i_ahb_gates_data __initconst = {
.mask = {0x7F77FFF, 0x14FB3F},
};
-static const __initconst struct gates_data sun5i_a10s_ahb_gates_data = {
+static const struct gates_data sun5i_a10s_ahb_gates_data __initconst = {
.mask = {0x147667e7, 0x185915},
};
-static const __initconst struct gates_data sun5i_a13_ahb_gates_data = {
+static const struct gates_data sun5i_a13_ahb_gates_data __initconst = {
.mask = {0x107067e7, 0x185111},
};
-static const __initconst struct gates_data sun6i_a31_ahb1_gates_data = {
+static const struct gates_data sun6i_a31_ahb1_gates_data __initconst = {
.mask = {0xEDFE7F62, 0x794F931},
};
-static const __initconst struct gates_data sun7i_a20_ahb_gates_data = {
+static const struct gates_data sun7i_a20_ahb_gates_data __initconst = {
.mask = { 0x12f77fff, 0x16ff3f },
};
-static const __initconst struct gates_data sun4i_apb0_gates_data = {
+static const struct gates_data sun4i_apb0_gates_data __initconst = {
.mask = {0x4EF},
};
-static const __initconst struct gates_data sun5i_a10s_apb0_gates_data = {
+static const struct gates_data sun5i_a10s_apb0_gates_data __initconst = {
.mask = {0x469},
};
-static const __initconst struct gates_data sun5i_a13_apb0_gates_data = {
+static const struct gates_data sun5i_a13_apb0_gates_data __initconst = {
.mask = {0x61},
};
-static const __initconst struct gates_data sun7i_a20_apb0_gates_data = {
+static const struct gates_data sun7i_a20_apb0_gates_data __initconst = {
.mask = { 0x4ff },
};
-static const __initconst struct gates_data sun4i_apb1_gates_data = {
+static const struct gates_data sun4i_apb1_gates_data __initconst = {
.mask = {0xFF00F7},
};
-static const __initconst struct gates_data sun5i_a10s_apb1_gates_data = {
+static const struct gates_data sun5i_a10s_apb1_gates_data __initconst = {
.mask = {0xf0007},
};
-static const __initconst struct gates_data sun5i_a13_apb1_gates_data = {
+static const struct gates_data sun5i_a13_apb1_gates_data __initconst = {
.mask = {0xa0007},
};
-static const __initconst struct gates_data sun6i_a31_apb1_gates_data = {
+static const struct gates_data sun6i_a31_apb1_gates_data __initconst = {
.mask = {0x3031},
};
-static const __initconst struct gates_data sun6i_a31_apb2_gates_data = {
+static const struct gates_data sun6i_a31_apb2_gates_data __initconst = {
.mask = {0x3F000F},
};
-static const __initconst struct gates_data sun7i_a20_apb1_gates_data = {
+static const struct gates_data sun7i_a20_apb1_gates_data __initconst = {
.mask = { 0xff80ff },
};
@@ -557,7 +557,7 @@ static void __init sunxi_gates_clk_setup(struct device_node *node,
}
/* Matches for factors clocks */
-static const __initconst struct of_device_id clk_factors_match[] = {
+static const struct of_device_id clk_factors_match[] __initconst = {
{.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,},
{.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,},
{.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,},
@@ -565,7 +565,7 @@ static const __initconst struct of_device_id clk_factors_match[] = {
};
/* Matches for divider clocks */
-static const __initconst struct of_device_id clk_div_match[] = {
+static const struct of_device_id clk_div_match[] __initconst = {
{.compatible = "allwinner,sun4i-axi-clk", .data = &sun4i_axi_data,},
{.compatible = "allwinner,sun4i-ahb-clk", .data = &sun4i_ahb_data,},
{.compatible = "allwinner,sun4i-apb0-clk", .data = &sun4i_apb0_data,},
@@ -574,7 +574,7 @@ static const __initconst struct of_device_id clk_div_match[] = {
};
/* Matches for mux clocks */
-static const __initconst struct of_device_id clk_mux_match[] = {
+static const struct of_device_id clk_mux_match[] __initconst = {
{.compatible = "allwinner,sun4i-cpu-clk", .data = &sun4i_cpu_mux_data,},
{.compatible = "allwinner,sun4i-apb1-mux-clk", .data = &sun4i_apb1_mux_data,},
{.compatible = "allwinner,sun6i-a31-ahb1-mux-clk", .data = &sun6i_a31_ahb1_mux_data,},
@@ -582,7 +582,7 @@ static const __initconst struct of_device_id clk_mux_match[] = {
};
/* Matches for gate clocks */
-static const __initconst struct of_device_id clk_gates_match[] = {
+static const struct of_device_id clk_gates_match[] __initconst = {
{.compatible = "allwinner,sun4i-axi-gates-clk", .data = &sun4i_axi_gates_data,},
{.compatible = "allwinner,sun4i-ahb-gates-clk", .data = &sun4i_ahb_gates_data,},
{.compatible = "allwinner,sun5i-a10s-ahb-gates-clk", .data = &sun5i_a10s_ahb_gates_data,},
--
1.8.1.2
next prev parent reply other threads:[~2013-08-28 1:44 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-12 9:13 [PATCH 1/9] clk: bcm2835: Fix incorrect placement of __initconst Sachin Kamat
2013-08-12 9:14 ` [PATCH 2/9] clk: nomadik: " Sachin Kamat
2013-08-13 6:14 ` Linus Walleij
2013-08-12 9:14 ` [PATCH 3/9] clk: u300: " Sachin Kamat
2013-08-16 15:10 ` Linus Walleij
2013-08-12 9:14 ` [PATCH 4/9] clk: armada-370: " Sachin Kamat
2013-08-12 10:30 ` Gregory CLEMENT
2013-08-12 9:14 ` [PATCH 5/9] clk: armada-xp: " Sachin Kamat
2013-08-12 10:31 ` Gregory CLEMENT
2013-08-12 9:14 ` [PATCH 6/9] clk: dove: " Sachin Kamat
2013-08-12 10:31 ` Gregory CLEMENT
2013-08-12 9:14 ` [PATCH 7/9] clk: kirkwood: " Sachin Kamat
2013-08-12 10:32 ` Gregory CLEMENT
2013-08-12 9:14 ` [PATCH 8/9] clk: sunxi: " Sachin Kamat
2013-08-28 1:44 ` Mike Turquette [this message]
2013-08-12 9:14 ` [PATCH 9/9] clk: s3c64xx: Fix incorrect placement of __initdata Sachin Kamat
2013-08-12 15:48 ` [PATCH 1/9] clk: bcm2835: Fix incorrect placement of __initconst Stephen Warren
2013-08-19 3:38 ` Sachin Kamat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130828014412.8231.96003@quantum \
--to=mturquette@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).