From: moinejf@free.fr (Jean-Francois Moine)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ARM: Dove: Add the audio device to the Cubox DT
Date: Sun, 1 Sep 2013 09:04:20 +0200 [thread overview]
Message-ID: <20130901090420.526e3bc3@armhf> (raw)
In-Reply-To: <20130831112430.GD6617@n2100.arm.linux.org.uk>
On Sat, 31 Aug 2013 12:24:31 +0100
Russell King - ARM Linux <linux@arm.linux.org.uk> wrote:
> > According to the Dove specification, the audio controller works with
> > the samples rates 44.1, 48 and 96 kHz, so, I don't see the usage of the
> > external clock, except when using the two audio controllers with
> > different sample rates.
>
> I don't see what the Dove specification has to do with that statement:
> what the Dove spec says is that if you use just the internal DCO, then
> only 44.1kHz, 48kHz and 96kHz are supported (with some trimming of that.)
> However, the use of an external clock allows further rates to be supported.
> If you have an external clock, there is no requirement to use the DCO for
> those sample rates - you can if you wish, or you can use the external clock.
>
> The mainline driver implements the use of the DCO for the standard 44.1,
> 48 and 96kHz rates, otherwise it uses the external clock if present. This
> is entirely conformant with the Dove spec.
Russell,
I looked again at the Armada-510-Functional-Spec, and I found:
- section 12.1
...
I2S Supported Features
An audio sample rate (Fs) of 44.1/48/96 kHz.
...
S/PDIF Supported Features
The IEC60958-1, IEC60958-3, and IEC61937 specifications.
An audio sample rate (Fs) of 44.1/48/96 kHz.
...
- Table 436: Clocks Control Register
Offset: Unit0: 0x000B1230, Unit1: 0x000B5230
...
1:0 MCLK source RW MCLK = 256 Fs, where Fs = 44.1 kHz, 48 kHz, 96 kHz.
0x0 Playback should not be active when selecting an external MCLK, or moving
from one external MCLK to another MCLK source.
0 = DCO: MCLK is from DCO.
1 = Reserved
2 = Reserved
3 = External: MCLK is from an external source.
As they don't work with my TV set, may you confirm that these webradios
http://kerne.online.stalig.net/live-ori.ogg
http://www.tv-radio.com/station/france_bleu_breiz_izel_mp3/france_bleu_breiz_izel_mp3-32k.m3u
http://plumfm.online.stalig.net/live-ori.ogg
work for you with the external clock? (sample rates resp. 33.075, 24
and 22.05 kHz)
--
Ken ar c'henta? | ** Breizh ha Linux atav! **
Jef | http://moinejf.free.fr/
next prev parent reply other threads:[~2013-09-01 7:04 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-28 9:35 [PATCH 2/2] ARM: Dove: Add the audio device to the Cubox DT Jean-Francois Moine
2013-08-28 10:14 ` Sebastian Hesselbarth
2013-08-31 10:51 ` Jean-Francois Moine
2013-08-31 11:24 ` Russell King - ARM Linux
2013-08-31 11:55 ` Jean-Francois Moine
2013-08-31 12:17 ` Russell King - ARM Linux
2013-09-01 7:04 ` Jean-Francois Moine [this message]
2013-09-01 9:26 ` Sebastian Hesselbarth
2013-09-01 11:23 ` Jean-Francois Moine
2013-09-26 8:11 ` Jean-Francois Moine
2013-09-26 8:31 ` Sebastian Hesselbarth
2013-09-26 11:28 ` Jean-Francois Moine
2013-09-26 12:42 ` Sebastian Hesselbarth
2013-09-28 14:27 ` Sebastian Hesselbarth
2013-10-03 16:17 ` Jean-Francois Moine
2013-10-08 16:11 ` Jason Cooper
2013-10-08 17:59 ` Jean-Francois Moine
2013-10-08 18:00 ` Jason Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130901090420.526e3bc3@armhf \
--to=moinejf@free.fr \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).