From mboxrd@z Thu Jan 1 00:00:00 1970 From: matt.porter@linaro.org (Matt Porter) Date: Mon, 9 Sep 2013 09:31:01 -0400 Subject: [PATCHv3] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black In-Reply-To: <1378638746-10627-1-git-send-email-koen@dominion.thruhere.net> References: <1378638746-10627-1-git-send-email-koen@dominion.thruhere.net> Message-ID: <20130909133059.GD10973@ohporter.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sun, Sep 08, 2013 at 01:12:26PM +0200, Koen Kooi wrote: > The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, > so create a common dtsi both can use. > > IMPORTANT: booting the existing am335x-bone.dts will blow up the HDMI transceiver > after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead > of 1.8. > > MMC support for AM335x still isn't in, so only the LDO change has been added. > > Signed-off-by: Koen Kooi Tested-by: Matt Porter Works fine for me on tip and 3.11. I did notice a regression in musb (worked on 3.11, now failing to probe but this is not related to your new dts as it happens on am335x-bone.dts too, assuming merge window volatility). One nit, git-am picked up a whitespace error on that extra line at EOF so you should trim that out. Only thing is...for a clear bug like this that will destroy hardware, it should be marked Cc: stable at vger.kernel.org to be picked up in stable. -Matt