From mboxrd@z Thu Jan 1 00:00:00 1970 From: balbi@ti.com (Felipe Balbi) Date: Mon, 9 Sep 2013 13:26:20 -0500 Subject: [PATCHv4] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black In-Reply-To: References: <1378734350-30479-1-git-send-email-koen@dominion.thruhere.net> <20130909141531.GL9325@radagast> Message-ID: <20130909182620.GO9325@radagast> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, On Mon, Sep 09, 2013 at 04:26:38PM +0200, Koen Kooi wrote: > > Op 9 sep. 2013, om 16:15 heeft Felipe Balbi het volgende geschreven: > > > Hi, > > > > On Mon, Sep 09, 2013 at 03:45:50PM +0200, Koen Kooi wrote: > >> The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, > >> so create a common dtsi both can use. > >> > >> IMPORTANT: booting the existing am335x-bone.dts will blow up the HDMI transceiver > >> after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead > >> of 1.8. > >> > >> MMC support for AM335x still isn't in, so only the LDO change has been added. > >> > >> Signed-off-by: Koen Kooi > >> Tested-by: Tom Rini > >> Tested-by: Matt Porter > > > > not entirelly related to $SUBJECT but having HDMI listed in BBB DTS will > > prevent the use of RF cape, no ? > > Complete and utter lack of software from TI for the RF cape is > preventing the RF cape from working regardless of HDMI entries. How would you ever use RF cape with HDMI on BBB ? It doesn't matter the amount of code TI (or whoever else) writes down, that will never work fine. -- balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: