From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 22/41] clk: ux500: Copy u8500_clk_init() ready for DT enablement
Date: Thu, 19 Sep 2013 13:31:03 +0100 [thread overview]
Message-ID: <20130919123103.GJ22389@lee--X1> (raw)
In-Reply-To: <1379506478-16625-23-git-send-email-lee.jones@linaro.org>
Hi Mike,
Sorry for top, posting.
This one requires your attention, thanks.
> Here we're using the old clock initialisation function as a template.
> It's necessary to remove all of the clk_register_clkdev() calls as
> they don't make sense when booting with Device Tree.
>
> Cc: Mike Turquette <mturquette@linaro.org>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
> drivers/clk/ux500/Makefile | 1 +
> drivers/clk/ux500/u8500_of_clk.c | 381 ++++++++++++++++++++++++++++++++
> include/linux/platform_data/clk-ux500.h | 3 +
> 3 files changed, 385 insertions(+)
> create mode 100644 drivers/clk/ux500/u8500_of_clk.c
>
> diff --git a/drivers/clk/ux500/Makefile b/drivers/clk/ux500/Makefile
> index c6a806e..521483f 100644
> --- a/drivers/clk/ux500/Makefile
> +++ b/drivers/clk/ux500/Makefile
> @@ -8,6 +8,7 @@ obj-y += clk-prcmu.o
> obj-y += clk-sysctrl.o
>
> # Clock definitions
> +obj-y += u8500_of_clk.o
> obj-y += u8500_clk.o
> obj-y += u9540_clk.o
> obj-y += u8540_clk.o
> diff --git a/drivers/clk/ux500/u8500_of_clk.c b/drivers/clk/ux500/u8500_of_clk.c
> new file mode 100644
> index 0000000..ceebce6
> --- /dev/null
> +++ b/drivers/clk/ux500/u8500_of_clk.c
> @@ -0,0 +1,381 @@
> +/*
> + * Clock definitions for u8500 platform.
> + *
> + * Copyright (C) 2012 ST-Ericsson SA
> + * Author: Ulf Hansson <ulf.hansson@linaro.org>
> + *
> + * License terms: GNU General Public License (GPL) version 2
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk-provider.h>
> +#include <linux/mfd/dbx500-prcmu.h>
> +#include <linux/platform_data/clk-ux500.h>
> +#include "clk.h"
> +
> +void u8500_of_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
> + u32 clkrst5_base, u32 clkrst6_base)
> +{
> + struct prcmu_fw_version *fw_version;
> + const char *sgaclk_parent = NULL;
> + struct clk *clk;
> +
> + /* Clock sources */
> + clk = clk_reg_prcmu_gate("soc0_pll", NULL, PRCMU_PLLSOC0,
> + CLK_IS_ROOT|CLK_IGNORE_UNUSED);
> +
> + clk = clk_reg_prcmu_gate("soc1_pll", NULL, PRCMU_PLLSOC1,
> + CLK_IS_ROOT|CLK_IGNORE_UNUSED);
> +
> + clk = clk_reg_prcmu_gate("ddr_pll", NULL, PRCMU_PLLDDR,
> + CLK_IS_ROOT|CLK_IGNORE_UNUSED);
> +
> + /* FIXME: Add sys, ulp and int clocks here. */
> +
> + clk = clk_register_fixed_rate(NULL, "rtc32k", "NULL",
> + CLK_IS_ROOT|CLK_IGNORE_UNUSED,
> + 32768);
> +
> + /* PRCMU clocks */
> + fw_version = prcmu_get_fw_version();
> + if (fw_version != NULL) {
> + switch (fw_version->project) {
> + case PRCMU_FW_PROJECT_U8500_C2:
> + case PRCMU_FW_PROJECT_U8520:
> + case PRCMU_FW_PROJECT_U8420:
> + sgaclk_parent = "soc0_pll";
> + break;
> + default:
> + break;
> + }
> + }
> +
> + if (sgaclk_parent)
> + clk = clk_reg_prcmu_gate("sgclk", sgaclk_parent,
> + PRCMU_SGACLK, 0);
> + else
> + clk = clk_reg_prcmu_gate("sgclk", NULL,
> + PRCMU_SGACLK, CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_gate("uartclk", NULL, PRCMU_UARTCLK, CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_gate("msp02clk", NULL, PRCMU_MSP02CLK, CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_gate("msp1clk", NULL, PRCMU_MSP1CLK, CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_gate("i2cclk", NULL, PRCMU_I2CCLK, CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_gate("slimclk", NULL, PRCMU_SLIMCLK, CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_gate("per1clk", NULL, PRCMU_PER1CLK, CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_gate("per2clk", NULL, PRCMU_PER2CLK, CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_gate("per3clk", NULL, PRCMU_PER3CLK, CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_gate("per5clk", NULL, PRCMU_PER5CLK, CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_gate("per6clk", NULL, PRCMU_PER6CLK, CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_gate("per7clk", NULL, PRCMU_PER7CLK, CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_scalable("lcdclk", NULL, PRCMU_LCDCLK, 0,
> + CLK_IS_ROOT|CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcmu_opp_gate("bmlclk", NULL, PRCMU_BMLCLK, CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_scalable("hsitxclk", NULL, PRCMU_HSITXCLK, 0,
> + CLK_IS_ROOT|CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcmu_scalable("hsirxclk", NULL, PRCMU_HSIRXCLK, 0,
> + CLK_IS_ROOT|CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcmu_scalable("hdmiclk", NULL, PRCMU_HDMICLK, 0,
> + CLK_IS_ROOT|CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcmu_gate("apeatclk", NULL, PRCMU_APEATCLK, CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_gate("apetraceclk", NULL, PRCMU_APETRACECLK,
> + CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_gate("mcdeclk", NULL, PRCMU_MCDECLK, CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_opp_gate("ipi2cclk", NULL, PRCMU_IPI2CCLK,
> + CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_gate("dsialtclk", NULL, PRCMU_DSIALTCLK,
> + CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_gate("dmaclk", NULL, PRCMU_DMACLK, CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_gate("b2r2clk", NULL, PRCMU_B2R2CLK, CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_scalable("tvclk", NULL, PRCMU_TVCLK, 0,
> + CLK_IS_ROOT|CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcmu_gate("sspclk", NULL, PRCMU_SSPCLK, CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_gate("rngclk", NULL, PRCMU_RNGCLK, CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_gate("uiccclk", NULL, PRCMU_UICCCLK, CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_gate("timclk", NULL, PRCMU_TIMCLK, CLK_IS_ROOT);
> +
> + clk = clk_reg_prcmu_opp_volt_scalable("sdmmcclk", NULL, PRCMU_SDMMCCLK,
> + 100000000,
> + CLK_IS_ROOT|CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcmu_scalable("dsi_pll", "hdmiclk",
> + PRCMU_PLLDSI, 0, CLK_SET_RATE_GATE);
> +
> +
> + clk = clk_reg_prcmu_scalable("dsi0clk", "dsi_pll",
> + PRCMU_DSI0CLK, 0, CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcmu_scalable("dsi1clk", "dsi_pll",
> + PRCMU_DSI1CLK, 0, CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcmu_scalable("dsi0escclk", "tvclk",
> + PRCMU_DSI0ESCCLK, 0, CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcmu_scalable("dsi1escclk", "tvclk",
> + PRCMU_DSI1ESCCLK, 0, CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcmu_scalable("dsi2escclk", "tvclk",
> + PRCMU_DSI2ESCCLK, 0, CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcmu_scalable_rate("armss", NULL,
> + PRCMU_ARMSS, 0, CLK_IS_ROOT|CLK_IGNORE_UNUSED);
> +
> + clk = clk_register_fixed_factor(NULL, "smp_twd", "armss",
> + CLK_IGNORE_UNUSED, 1, 2);
> +
> + /*
> + * FIXME: Add special handled PRCMU clocks here:
> + * 1. clkout0yuv, use PRCMU as parent + need regulator + pinctrl.
> + * 2. ab9540_clkout1yuv, see clkout0yuv
> + */
> +
> + /* PRCC P-clocks */
> + clk = clk_reg_prcc_pclk("p1_pclk0", "per1clk", clkrst1_base,
> + BIT(0), 0);
> +
> + clk = clk_reg_prcc_pclk("p1_pclk1", "per1clk", clkrst1_base,
> + BIT(1), 0);
> +
> + clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", clkrst1_base,
> + BIT(2), 0);
> +
> + clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", clkrst1_base,
> + BIT(3), 0);
> +
> + clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", clkrst1_base,
> + BIT(4), 0);
> +
> + clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", clkrst1_base,
> + BIT(5), 0);
> +
> + clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", clkrst1_base,
> + BIT(6), 0);
> +
> + clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", clkrst1_base,
> + BIT(7), 0);
> +
> + clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", clkrst1_base,
> + BIT(8), 0);
> +
> + clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", clkrst1_base,
> + BIT(9), 0);
> +
> + clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", clkrst1_base,
> + BIT(10), 0);
> +
> + clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", clkrst1_base,
> + BIT(11), 0);
> +
> + clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", clkrst2_base,
> + BIT(0), 0);
> +
> + clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", clkrst2_base,
> + BIT(1), 0);
> +
> + clk = clk_reg_prcc_pclk("p2_pclk2", "per2clk", clkrst2_base,
> + BIT(2), 0);
> +
> + clk = clk_reg_prcc_pclk("p2_pclk3", "per2clk", clkrst2_base,
> + BIT(3), 0);
> +
> + clk = clk_reg_prcc_pclk("p2_pclk4", "per2clk", clkrst2_base,
> + BIT(4), 0);
> +
> + clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", clkrst2_base,
> + BIT(5), 0);
> +
> + clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", clkrst2_base,
> + BIT(6), 0);
> +
> + clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", clkrst2_base,
> + BIT(7), 0);
> +
> + clk = clk_reg_prcc_pclk("p2_pclk8", "per2clk", clkrst2_base,
> + BIT(8), 0);
> +
> + clk = clk_reg_prcc_pclk("p2_pclk9", "per2clk", clkrst2_base,
> + BIT(9), 0);
> +
> + clk = clk_reg_prcc_pclk("p2_pclk10", "per2clk", clkrst2_base,
> + BIT(10), 0);
> +
> + clk = clk_reg_prcc_pclk("p2_pclk11", "per2clk", clkrst2_base,
> + BIT(11), 0);
> +
> + clk = clk_reg_prcc_pclk("p2_pclk12", "per2clk", clkrst2_base,
> + BIT(12), 0);
> +
> + clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", clkrst3_base,
> + BIT(0), 0);
> +
> + clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", clkrst3_base,
> + BIT(1), 0);
> +
> + clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", clkrst3_base,
> + BIT(2), 0);
> +
> + clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", clkrst3_base,
> + BIT(3), 0);
> +
> + clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", clkrst3_base,
> + BIT(4), 0);
> +
> + clk = clk_reg_prcc_pclk("p3_pclk5", "per3clk", clkrst3_base,
> + BIT(5), 0);
> +
> + clk = clk_reg_prcc_pclk("p3_pclk6", "per3clk", clkrst3_base,
> + BIT(6), 0);
> +
> + clk = clk_reg_prcc_pclk("p3_pclk7", "per3clk", clkrst3_base,
> + BIT(7), 0);
> +
> + clk = clk_reg_prcc_pclk("p3_pclk8", "per3clk", clkrst3_base,
> + BIT(8), 0);
> +
> + clk = clk_reg_prcc_pclk("p5_pclk0", "per5clk", clkrst5_base,
> + BIT(0), 0);
> +
> + clk = clk_reg_prcc_pclk("p5_pclk1", "per5clk", clkrst5_base,
> + BIT(1), 0);
> +
> + clk = clk_reg_prcc_pclk("p6_pclk0", "per6clk", clkrst6_base,
> + BIT(0), 0);
> +
> + clk = clk_reg_prcc_pclk("p6_pclk1", "per6clk", clkrst6_base,
> + BIT(1), 0);
> +
> + clk = clk_reg_prcc_pclk("p6_pclk2", "per6clk", clkrst6_base,
> + BIT(2), 0);
> +
> + clk = clk_reg_prcc_pclk("p6_pclk3", "per6clk", clkrst6_base,
> + BIT(3), 0);
> +
> + clk = clk_reg_prcc_pclk("p6_pclk4", "per6clk", clkrst6_base,
> + BIT(4), 0);
> +
> + clk = clk_reg_prcc_pclk("p6_pclk5", "per6clk", clkrst6_base,
> + BIT(5), 0);
> +
> + clk = clk_reg_prcc_pclk("p6_pclk6", "per6clk", clkrst6_base,
> + BIT(6), 0);
> +
> + clk = clk_reg_prcc_pclk("p6_pclk7", "per6clk", clkrst6_base,
> + BIT(7), 0);
> +
> + /* PRCC K-clocks
> + *
> + * FIXME: Some drivers requires PERPIH[n| to be automatically enabled
> + * by enabling just the K-clock, even if it is not a valid parent to
> + * the K-clock. Until drivers get fixed we might need some kind of
> + * "parent muxed join".
> + */
> +
> + /* Periph1 */
> + clk = clk_reg_prcc_kclk("p1_uart0_kclk", "uartclk",
> + clkrst1_base, BIT(0), CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcc_kclk("p1_uart1_kclk", "uartclk",
> + clkrst1_base, BIT(1), CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk",
> + clkrst1_base, BIT(2), CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk",
> + clkrst1_base, BIT(3), CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk",
> + clkrst1_base, BIT(4), CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk",
> + clkrst1_base, BIT(5), CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk",
> + clkrst1_base, BIT(6), CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk",
> + clkrst1_base, BIT(8), CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk",
> + clkrst1_base, BIT(9), CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk",
> + clkrst1_base, BIT(10), CLK_SET_RATE_GATE);
> +
> + /* Periph2 */
> + clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk",
> + clkrst2_base, BIT(0), CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk",
> + clkrst2_base, BIT(2), CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk",
> + clkrst2_base, BIT(3), CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk",
> + clkrst2_base, BIT(4), CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcc_kclk("p2_sdi3_kclk", "sdmmcclk",
> + clkrst2_base, BIT(5), CLK_SET_RATE_GATE);
> +
> + /* Note that rate is received from parent. */
> + clk = clk_reg_prcc_kclk("p2_ssirx_kclk", "hsirxclk",
> + clkrst2_base, BIT(6),
> + CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT);
> + clk = clk_reg_prcc_kclk("p2_ssitx_kclk", "hsitxclk",
> + clkrst2_base, BIT(7),
> + CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT);
> +
> + /* Periph3 */
> + clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk",
> + clkrst3_base, BIT(1), CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk",
> + clkrst3_base, BIT(2), CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk",
> + clkrst3_base, BIT(3), CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk",
> + clkrst3_base, BIT(4), CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcc_kclk("p3_ske_kclk", "rtc32k",
> + clkrst3_base, BIT(5), CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcc_kclk("p3_uart2_kclk", "uartclk",
> + clkrst3_base, BIT(6), CLK_SET_RATE_GATE);
> +
> + clk = clk_reg_prcc_kclk("p3_sdi5_kclk", "sdmmcclk",
> + clkrst3_base, BIT(7), CLK_SET_RATE_GATE);
> +
> + /* Periph6 */
> + clk = clk_reg_prcc_kclk("p3_rng_kclk", "rngclk",
> + clkrst6_base, BIT(0), CLK_SET_RATE_GATE);
> +}
> diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h
> index 9d98f3a..97baf83 100644
> --- a/include/linux/platform_data/clk-ux500.h
> +++ b/include/linux/platform_data/clk-ux500.h
> @@ -10,6 +10,9 @@
> #ifndef __CLK_UX500_H
> #define __CLK_UX500_H
>
> +void u8500_of_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
> + u32 clkrst5_base, u32 clkrst6_base);
> +
> void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
> u32 clkrst5_base, u32 clkrst6_base);
> void u9540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2013-09-19 12:31 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-18 12:13 [PATCH v2 00/41] Enable common clock with Device Tree on ux500 platforms Lee Jones
2013-09-18 12:13 ` [PATCH 01/41] mfd: dbx500-prcmu: Correctly reorder PRCMU clock identifiers Lee Jones
2013-09-18 12:23 ` Linus Walleij
2013-09-18 12:13 ` [PATCH 02/41] mfd: dbx500-prcmu: Move PRCMU numerical clock identifiers into DT include file Lee Jones
2013-09-18 12:24 ` Linus Walleij
2013-09-18 12:14 ` [PATCH 03/41] mfd: dbx500: Remove any mention of the BML8580CLK Lee Jones
2013-09-18 12:14 ` [PATCH 04/41] ARM: ux500: Add PRCMU clock node to DBx500 Device Tree Lee Jones
2013-09-18 12:14 ` [PATCH 05/41] ARM: ux500: Supply the DMA clock lookup to the DBX500 DT Lee Jones
2013-09-18 12:14 ` [PATCH 06/41] ARM: ux500: Add PRCC Peripheral clock node to DBx500 Device Tree Lee Jones
2013-09-18 12:14 ` [PATCH 07/41] ARM: ux500: Supply the GPIO clocks lookup to the DBX500 DT Lee Jones
2013-09-18 12:14 ` [PATCH 08/41] ARM: ux500: Supply the USB clock " Lee Jones
2013-09-18 12:14 ` [PATCH 09/41] ARM: ux500: Supply the Ethernet clock lookup to Snowball's DT Lee Jones
2013-09-18 12:14 ` [PATCH 10/41] ARM: ux500: Add PRCC Kernel clock node to DBx500 Device Tree Lee Jones
2013-09-18 12:14 ` [PATCH 11/41] ARM: ux500: Supply the I2C clocks lookup to the DBX500 DT Lee Jones
2013-09-18 12:14 ` [PATCH 12/41] ARM: ux500: Supply the UART " Lee Jones
2013-09-18 12:14 ` [PATCH 13/41] ARM: ux500: Supply the SDI (MMC) " Lee Jones
2013-09-18 12:14 ` [PATCH 14/41] ARM: ux500: Supply the MSP (Audio) " Lee Jones
2013-09-18 12:14 ` [PATCH 15/41] ARM: ux500: Add RTC (fixed-frequency) clock node to DBx500 Device Tree Lee Jones
2013-09-18 12:14 ` [PATCH 16/41] ARM: ux500: Supply the RTC clock lookup to the DBX500 DT Lee Jones
2013-09-18 12:14 ` [PATCH 17/41] ARM: ux500: Add TWD (fixed-factor) clock node to DBx500 Device Tree Lee Jones
2013-09-18 12:14 ` [PATCH 18/41] ARM: ux500: Supply the TWD Timer clock lookup to the DBX500 DT Lee Jones
2013-09-18 12:14 ` [PATCH 19/41] ARM: ux500: Add a DT node for the Nomadik System Timer (MTU0) Lee Jones
2013-09-18 12:14 ` [PATCH 20/41] ARM: ux500: Don't attempt to enable the Nomadik System Timer twice Lee Jones
2013-09-18 12:14 ` [PATCH 21/41] clk: ux500: Remove BML8580 clock Lee Jones
2013-09-18 12:14 ` [PATCH 22/41] clk: ux500: Copy u8500_clk_init() ready for DT enablement Lee Jones
2013-09-19 12:31 ` Lee Jones [this message]
2013-09-20 20:59 ` Linus Walleij
2013-12-13 1:51 ` Mike Turquette
2013-12-19 20:15 ` Ulf Hansson
2013-09-18 12:14 ` [PATCH 23/41] clk: ux500: Provide u8500_clk with skeleton Device Tree support Lee Jones
2013-09-18 12:14 ` [PATCH 24/41] clk: ux500: Add a 2-cell Device Tree parser for obtaining PRCC clocks Lee Jones
2013-09-18 12:14 ` [PATCH 25/41] clk: ux500: Add Device Tree support for the PRCMU clock Lee Jones
2013-09-18 12:14 ` [PATCH 26/41] clk: ux500: Add Device Tree support for the PRCC Peripheral clock Lee Jones
2013-09-18 12:14 ` [PATCH 27/41] clk: ux500: Add Device Tree support for the PRCC Kernel clock Lee Jones
2013-09-18 12:14 ` [PATCH 28/41] clk: ux500: Add Device Tree support for the RTC clock Lee Jones
2013-09-18 12:14 ` [PATCH 29/41] clk: ux500: Add Device Tree support for the TWD clock Lee Jones
2013-09-18 12:14 ` [PATCH 30/41] usb: musb: ux500: Don't supply a con_id when requesting the clock Lee Jones
2013-09-20 20:41 ` Linus Walleij
2013-09-23 20:43 ` Felipe Balbi
2013-09-18 12:14 ` [PATCH 31/41] ARM: ux500: Call appropriate clock initialisation based on DT or !DT booting Lee Jones
2013-09-18 12:14 ` [PATCH 32/41] ARM: ux500: Remove AUXDATA relating to GPIO clock-name bindings Lee Jones
2013-09-18 12:14 ` [PATCH 33/41] ARM: ux500: Remove AUXDATA relating to UART " Lee Jones
2013-09-18 12:14 ` [PATCH 34/41] ARM: ux500: Remove AUXDATA relating to I2C " Lee Jones
2013-09-18 12:14 ` [PATCH 35/41] ARM: ux500: Relocate AUXDATA relating to MSP (Audio) Lee Jones
2013-09-18 12:14 ` [PATCH 36/41] ARM: ux500: Remove AUXDATA relating to USB clock-name bindings Lee Jones
2013-09-18 12:14 ` [PATCH 37/41] ARM: ux500: Remove AUXDATA relating to Ethernet " Lee Jones
2013-09-18 12:14 ` [PATCH 38/41] ARM: ux500: Remove AUXDATA relating to DMA " Lee Jones
2013-09-18 12:14 ` [PATCH 39/41] ARM: ux500: Reclassify PRCMU AUXDATA entry Lee Jones
2013-09-18 12:14 ` [PATCH 40/41] ARM: ux500: Remove SSP AUXDATA pertaining to DMA bindings Lee Jones
2013-09-18 12:14 ` [PATCH 41/41] ARM: ux500: Fix trivial whitespace/tabbing issue Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130919123103.GJ22389@lee--X1 \
--to=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox