From mboxrd@z Thu Jan 1 00:00:00 1970 From: nm@ti.com (Nishanth Menon) Date: Fri, 27 Sep 2013 07:24:39 -0500 Subject: [PATCHv4 11/18] arm: dts: add omap4430 thermal data In-Reply-To: <1380251605-3804-12-git-send-email-eduardo.valentin@ti.com> References: <1380251605-3804-1-git-send-email-eduardo.valentin@ti.com> <1380251605-3804-12-git-send-email-eduardo.valentin@ti.com> Message-ID: <20130927122439.GA8360@kahuna> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 23:13-20130926, Eduardo Valentin wrote: > This patch changes the dtsi entry on omap4430 to contain > the thermal data. This data will enable the passive > cooling with CPUfreq cooling device at 100C and the > system will do a thermal shutdown at 125C. > > Cc: "Beno?t Cousson" > Cc: Tony Lindgren > Cc: Russell King > Cc: linux-omap at vger.kernel.org > Cc: devicetree-discuss at lists.ozlabs.org > Cc: linux-arm-kernel at lists.infradead.org > Cc: linux-kernel at vger.kernel.org > Signed-off-by: Eduardo Valentin > --- > arch/arm/boot/dts/omap443x.dtsi | 10 ++++++++-- > 1 file changed, 8 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi > index bcf455e..e9c97d6 100644 > --- a/arch/arm/boot/dts/omap443x.dtsi > +++ b/arch/arm/boot/dts/omap443x.dtsi > @@ -12,7 +12,7 @@ > > / { > cpus { > - cpu at 0 { > + cpu0: cpu at 0 { > /* OMAP443x variants OPP50-OPPNT */ > operating-points = < > /* kHz uV */ > @@ -25,9 +25,15 @@ > }; > }; > > - bandgap { > + thermal-zones{ > + #include "omap4-cpu-thermal.dtsi" > + }; > + > + bandgap: bandgap { > reg = <0x4a002260 0x4 > 0x4a00232C 0x4>; > compatible = "ti,omap4430-bandgap"; > + > + #thermal-sensor-cells = <0>; 2 cents: we might want to move bandgap under ocp? > }; > }; > -- > 1.8.2.1.342.gfa7285d > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- Regards, Nishanth Menon